[PATCH V2 3/3] arm64: dts: add initial device tree for Thunder Bay SoC
Rob Herring
robh at kernel.org
Thu Jul 29 12:53:25 PDT 2021
On Tue, Jul 20, 2021 at 10:52:49AM +0530, kenchappa.demakkanavar at intel.com wrote:
> From: "Demakkanavar, Kenchappa" <kenchappa.demakkanavar at intel.com>
>
> Add initial device tree for Intel Movidius SoC code-named Thunder Bay.
>
> This initial DT includes nodes for 4 CPU clusters with 4 Cortex-A53
> cores per cluster, UARTs, GIC, ARM Timer and PSCI.
Make sure you run 'make dtbs_check' on these.
There shouldn't be any dtc warnings and or undocumented compatible
warnings at a minimum.
> thunderbay-soc.dtsi - Thunder Bay SoC dtsi file
> hddl_hybrid_4s.dts - Thunder Bay full configuration board dts
> with 4 VPU processors
> hddl_hybrid_2s_02.dts - Thunder Bay prime configuration board dts with
> 2 VPU processors (slice 0 and slice 2 enabled)
> hddl_hybrid_2s_03.dts - Thunder Bay prime configuration board dts with
> 2 VPU processors (slice 0 and slice 3 enabled)
> hddl_hybrid_2s_12.dts - Thunder Bay prime configuration board dts with
> 2 VPU processors (slice 1 and slice 2 enabled)
> hddl_hybrid_2s_13.dts - Thunder Bay prime configuration board dts with
> 2 VPU processors (slice 1 and slice 3 enabled)
>
> Signed-off-by: Demakkanavar, Kenchappa <kenchappa.demakkanavar at intel.com>
> ---
> MAINTAINERS | 2 +
> arch/arm64/boot/dts/intel/Makefile | 6 +
> arch/arm64/boot/dts/intel/hddl_hybrid_2s_02.dts | 43 +++++
> arch/arm64/boot/dts/intel/hddl_hybrid_2s_03.dts | 43 +++++
> arch/arm64/boot/dts/intel/hddl_hybrid_2s_12.dts | 43 +++++
> arch/arm64/boot/dts/intel/hddl_hybrid_2s_13.dts | 43 +++++
> arch/arm64/boot/dts/intel/hddl_hybrid_4s.dts | 54 ++++++
> arch/arm64/boot/dts/intel/thunderbay-soc.dtsi | 243 ++++++++++++++++++++++++
> 8 files changed, 477 insertions(+)
> create mode 100644 arch/arm64/boot/dts/intel/hddl_hybrid_2s_02.dts
> create mode 100644 arch/arm64/boot/dts/intel/hddl_hybrid_2s_03.dts
> create mode 100644 arch/arm64/boot/dts/intel/hddl_hybrid_2s_12.dts
> create mode 100644 arch/arm64/boot/dts/intel/hddl_hybrid_2s_13.dts
> create mode 100644 arch/arm64/boot/dts/intel/hddl_hybrid_4s.dts
> create mode 100644 arch/arm64/boot/dts/intel/thunderbay-soc.dtsi
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 041f9a0..68317f0 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1996,6 +1996,8 @@ ARM/INTEL THUNDERBAY ARCHITECTURE
> M: Demakkanavar, Kenchappa <kenchappa.demakkanavar at intel.com>
> S: Maintained
> F: Documentation/devicetree/bindings/arm/intel,thunderbay.yaml
> +F: arch/arm64/boot/dts/intel/hddl*
> +F: arch/arm64/boot/dts/intel/thunderbay-soc.dtsi
>
> ARM/INTEL XSC3 (MANZANO) ARM CORE
> M: Lennert Buytenhek <kernel at wantstofly.org>
> diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
> index 0b54774..767b74b 100644
> --- a/arch/arm64/boot/dts/intel/Makefile
> +++ b/arch/arm64/boot/dts/intel/Makefile
> @@ -3,3 +3,9 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_socdk.dtb \
> socfpga_agilex_socdk_nand.dtb \
> socfpga_n5x_socdk.dtb
> dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
> +
> +dtb-$(CONFIG_ARCH_THUNDERBAY) += hddl_hybrid_4s.dtb \
> + hddl_hybrid_2s_02.dtb \
> + hddl_hybrid_2s_03.dtb \
> + hddl_hybrid_2s_12.dtb \
> + hddl_hybrid_2s_13.dtb
> diff --git a/arch/arm64/boot/dts/intel/hddl_hybrid_2s_02.dts b/arch/arm64/boot/dts/intel/hddl_hybrid_2s_02.dts
> new file mode 100644
> index 0000000..f907ddd
> --- /dev/null
> +++ b/arch/arm64/boot/dts/intel/hddl_hybrid_2s_02.dts
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2021 Intel Corporation.
> + *
> + * Device tree describing Intel Thunder Bay Hybrid HDDL Prime configuration
> + * board.
> + *
> + * DDR 8GB + 4GB with vpu slice 0 and vpu slice 2
> + */
> +
> +/dts-v1/;
> +
> +#include "thunderbay-soc.dtsi"
> +
> +/ {
> + model = "Intel Thunder Bay Hybrid HDDL Prime Board";
> + compatible = "intel,thunderbay";
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
Why do you have an alias to a disabled node?
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 100A000000 {
Lowercase hex on unit-addresses.
> + device_type = "memory";
> + /* 8GB of DDR memory */
> + reg = <0x10 0x0A000000 0x2 0x0>;
> + };
> +
> + memory at 1200000000 {
> + device_type = "memory";
> + /* 4GB of DDR memory */
> + reg = <0x12 0x0 0x1 0x0>;
> + };
> +
> +};
> diff --git a/arch/arm64/boot/dts/intel/hddl_hybrid_2s_03.dts b/arch/arm64/boot/dts/intel/hddl_hybrid_2s_03.dts
> new file mode 100644
> index 0000000..01a3d4c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/intel/hddl_hybrid_2s_03.dts
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2021 Intel Corporation.
> + *
> + * Device tree describing Intel Thunder Bay Hybrid HDDL Prime configuration
> + * board
> + *
> + * DDR 8GB + 4GB with vpu slice 0 and vpu slice 3
> + */
> +
> +/dts-v1/;
> +
> +#include "thunderbay-soc.dtsi"
> +
> +/ {
> + model = "Intel Thunder Bay Hybrid HDDL Prime Board";
> + compatible = "intel,thunderbay";
This should have a board specific compatible. Not sure if you need 1 or
4 though. If the VPU slice stuff is determined elsewhere then 1 is
enough.
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 100A000000 {
> + device_type = "memory";
> + /* 8GB of DDR memory */
> + reg = <0x10 0x0A000000 0x2 0x0>;
> + };
> +
> + memory at 1200000000 {
> + device_type = "memory";
> + /* 4GB of DDR memory */
> + reg = <0x12 0x0 0x1 0x0>;
> + };
> +
> +};
> diff --git a/arch/arm64/boot/dts/intel/hddl_hybrid_2s_12.dts b/arch/arm64/boot/dts/intel/hddl_hybrid_2s_12.dts
> new file mode 100644
> index 0000000..e31db16
> --- /dev/null
> +++ b/arch/arm64/boot/dts/intel/hddl_hybrid_2s_12.dts
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2021 Intel Corporation.
> + *
> + * Device tree describing Intel Thunder Bay Hybrid HDDL Prime configuration
> + * board
> + *
> + * DDR 8GB + 4GB with vpu slice 1 and vpu slice 2
> + */
> +
> +/dts-v1/;
> +
> +#include "thunderbay-soc.dtsi"
> +
> +/ {
> + model = "Intel Thunder Bay Hybrid HDDL Prime Board";
> + compatible = "intel,thunderbay";
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 100A000000 {
> + device_type = "memory";
> + /* 8GB of DDR memory */
> + reg = <0x10 0x0A000000 0x2 0x0>;
> + };
> +
> + memory at 1200000000 {
> + device_type = "memory";
> + /* 4GB of DDR memory */
> + reg = <0x12 0x0 0x1 0x0>;
> + };
> +
> +};
> diff --git a/arch/arm64/boot/dts/intel/hddl_hybrid_2s_13.dts b/arch/arm64/boot/dts/intel/hddl_hybrid_2s_13.dts
> new file mode 100644
> index 0000000..6529664
> --- /dev/null
> +++ b/arch/arm64/boot/dts/intel/hddl_hybrid_2s_13.dts
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2021 Intel Corporation.
> + *
> + * Device tree describing Intel Thunder Bay Hybrid HDDL Prime configuration
> + * board
> + *
> + * DDR 8GB + 4GB with vpu slice 1 and vpu slice 3
> + */
> +
> +/dts-v1/;
> +
> +#include "thunderbay-soc.dtsi"
> +
> +/ {
> + model = "Intel Thunder Bay Hybrid HDDL Prime Board";
> + compatible = "intel,thunderbay";
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 100A000000 {
> + device_type = "memory";
> + /* 8GB of DDR memory */
> + reg = <0x10 0x0A000000 0x2 0x0>;
> + };
> +
> + memory at 1200000000 {
> + device_type = "memory";
> + /* 4GB of DDR memory */
> + reg = <0x12 0x0 0x1 0x0>;
> + };
> +
> +};
These all look the same, why do we need 4 copies?
> diff --git a/arch/arm64/boot/dts/intel/hddl_hybrid_4s.dts b/arch/arm64/boot/dts/intel/hddl_hybrid_4s.dts
> new file mode 100644
> index 0000000..561ecea
> --- /dev/null
> +++ b/arch/arm64/boot/dts/intel/hddl_hybrid_4s.dts
> @@ -0,0 +1,54 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2021 Intel Corporation.
> + *
> + * Device tree describing Intel Thunder Bay Hybrid HDDL Full configuration
> + * board
> + *
> + * DDR 8GB + 8GB + 4GB + 4GB with four vpu slices
> + */
> +
> +/dts-v1/;
> +
> +#include "thunderbay-soc.dtsi"
> +
> +/ {
> + model = "Intel Thunder Bay Hybrid HDDL Full Board";
> + compatible = "intel,thunderbay";
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 100A000000 {
> + device_type = "memory";
> + /* 8GB of DDR memory */
> + reg = <0x10 0x0A000000 0x2 0x0>;
> + };
> +
> + memory at 1200000000 {
> + device_type = "memory";
> + /* 8GB of DDR memory */
> + reg = <0x12 0x0 0x2 0x0>;
> + };
> +
> + memory at 1400000000 {
> + device_type = "memory";
> + /* 4GB of DDR memory */
> + reg = <0x14 0x0 0x1 0x0>;
> + };
> +
> + memory at 1500000000 {
> + device_type = "memory";
> + /* 4GB of DDR memory */
> + reg = <0x15 0x0 0x1 0x0>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/intel/thunderbay-soc.dtsi b/arch/arm64/boot/dts/intel/thunderbay-soc.dtsi
> new file mode 100644
> index 0000000..834200d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/intel/thunderbay-soc.dtsi
> @@ -0,0 +1,243 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2021 Intel Corporation.
> + *
> + * Device tree describing Thunder Bay SoC
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +
> + compatible = "intel,thunderbay";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&CPU0>;
> + };
> + core1 {
> + cpu = <&CPU1>;
> + };
> + core2 {
> + cpu = <&CPU2>;
> + };
> + core3 {
> + cpu = <&CPU3>;
> + };
> + };
> + cluster1 {
> + core0 {
> + cpu = <&CPU4>;
> + };
> + core1 {
> + cpu = <&CPU5>;
> + };
> + core2 {
> + cpu = <&CPU6>;
> + };
> + core3 {
> + cpu = <&CPU7>;
> + };
> + };
> + cluster2 {
> + core0 {
> + cpu = <&CPU8>;
> + };
> + core1 {
> + cpu = <&CPU9>;
> + };
> + core2 {
> + cpu = <&CPU10>;
> + };
> + core3 {
> + cpu = <&CPU11>;
> + };
> + };
> + cluster3 {
> + core0 {
> + cpu = <&CPU12>;
> + };
> + core1 {
> + cpu = <&CPU13>;
> + };
> + core2 {
> + cpu = <&CPU14>;
> + };
> + core3 {
> + cpu = <&CPU15>;
> + };
> + };
> + };
> +
> + CPU0: cpu at 0 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + };
> +
> + CPU1: cpu at 1 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x1>;
> + enable-method = "psci";
> + };
> +
> + CPU2: cpu at 2 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x2>;
> + enable-method = "psci";
> + };
> +
> + CPU3: cpu at 3 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x3>;
> + enable-method = "psci";
> + };
> +
> + CPU4: cpu at 100 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + };
> +
> + CPU5: cpu at 101 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x101>;
> + enable-method = "psci";
> + };
> +
> + CPU6: cpu at 102 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x102>;
> + enable-method = "psci";
> + };
> +
> + CPU7: cpu at 103 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x103>;
> + enable-method = "psci";
> + };
> +
> + CPU8: cpu at 200 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x200>;
> + enable-method = "psci";
> + };
> +
> + CPU9: cpu at 201 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x201>;
> + enable-method = "psci";
> + };
> +
> + CPU10: cpu at 202 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x202>;
> + enable-method = "psci";
> + };
> +
> + CPU11: cpu at 203 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x203>;
> + enable-method = "psci";
> + };
> +
> + CPU12: cpu at 300 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x300>;
> + enable-method = "psci";
> + };
> +
> + CPU13: cpu at 301 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x301>;
> + enable-method = "psci";
> + };
> +
> + CPU14: cpu at 302 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x302>;
> + enable-method = "psci";
> + };
> +
> + CPU15: cpu at 303 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x303>;
> + enable-method = "psci";
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
PSCI 1.0 has been out for 6 years...
> + method = "smc";
> + };
> +
> + gic: interrupt-controller at 88400000 {
> + compatible = "arm,gic-v3";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + reg = <0x0 0x88400000 0x0 0x200000>, /* GICD */
> + <0x0 0x88600000 0x0 0x200000>; /* GICR */
> + /* VGIC maintenance interrupt */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + /* Secure, non-secure, virtual, and hypervisor */
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + dma-ranges;
> +
> + uart0: serial at 80460000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x80460000 0x0 0x100>;
> + interrupts = <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <50000000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + };
> +
> + uart1: serial at 80470000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x80470000 0x0 0x100>;
> + interrupts = <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <50000000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> + };
> +};
> --
> 2.7.4
>
>
More information about the linux-arm-kernel
mailing list