[PATCH v3 0/2] Apple M1 PCIe DT bindings

[Marc Zyngier]

On Mon, 26 Jul 2021 09:31:59 +0100,
Mark Kettenis <mark.kettenis at xs4all.nl> wrote:
> 
> From: Mark Kettenis <kettenis at openbsd.org>
> 
> This small series adds bindings for the PCIe controller found on the
> Apple M1 SoC.
> 
> At this point, the primary consumer for these bindings is U-Boot.
> With these bindings U-Boot can bring up the links for the root ports
> of the PCIe root complex.  A simple OS driver can then provide
> standard ECAM access and manage MSI interrupts to provide access
> to the built-in Ethernet and XHCI controllers of the Mac mini.
> 
> The Apple controller incorporates Synopsys Designware PCIe logic
> to implement its root port.  But unlike other hardware currently
> supported by U-Boot and the Linux kernel the Apple hardware
> integrates multiple root ports.  As such the existing bindings
> for the DWC PCIe interface can't be used.  There is a single ECAM
> space for all root space, but separate GPIOs to take the PCI devices
> on those ports out of reset.  Therefore the standard "reset-gpio" and
> "max-link-speed" properties appear on the child nodes representing
> the PCI devices that correspond to the individual root ports.
> 
> MSIs are handled by the PCIe controller and translated into "regular
> interrupts".  A range of 32 MSIs is provided.  These 32 MSIs can be
> distributed over the root ports as the OS sees fit by programming the
> PCIe controller port registers.
> 
> I still hope to hear from Marc Zyngier on the way MSIs are represented
> in this binding.
> 
> Patch 2/2 of this series depends on the pinctrl series I sent earlier
> and will probably go through Hector Martin's Apple M1 SoC tree.
> 
> 
> Changelog:
> 
> v3: - Remove unneeded include in example
> 
> v2: - Adjust name for ECAM in "reg-names"
>     - Drop "phy" registers
>     - Expand description
>     - Add description for "interrupts"
>     - Fix incorrect minItems for "interrupts"
>     - Fix incorrect MaxItems for "reg-names"
>     - Document the use of "msi-controller", "msi-parent", "iommu-map" and
>       "iommu-map-mask"
>     - Fix "bus-range" and "iommu-map" properties in the example
> 
> Mark Kettenis (2):
>   dt-bindings: pci: Add DT bindings for apple,pcie
>   arm64: apple: Add PCIe node
> 
>  .../devicetree/bindings/pci/apple,pcie.yaml   | 166 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  arch/arm64/boot/dts/apple/t8103.dtsi          |  63 +++++++
>  3 files changed, 230 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/apple,pcie.yaml

Thanks a log for doing this! For the whole series:

Reviewed-by: Marc Zyngier <maz at kernel.org>

	M.

-- 
Without deviation from the norm, progress is not possible.