[PATCH 1/5] arm64: dts: ls1088a: add internal PCS for DPMAC1 node

[Ioana Ciornei]

On Thu, Jul 22, 2021 at 04:24:46AM +0000, Mathew McBride wrote:
> A previous patched added the PCS for DPMAC2 only, as
> used for the AQR PHY on the LS1088ARDB.
> 
> DPMAC1 PCS access is required for PHYLINK SFP support
> on the Traverse Ten64 board.
> 
> Signed-off-by: Mathew McBride <matt at traverse.com.au>

Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>

> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index 2fa6cfbef01f..79ceadc9dc4a 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -765,6 +765,19 @@ emdio2: mdio at 8b97000 {
>  			status = "disabled";
>  		};
>  
> +		pcs_mdio1: mdio at 8c07000 {
> +			compatible = "fsl,fman-memac-mdio";
> +			reg = <0x0 0x8c07000 0x0 0x1000>;
> +			little-endian;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +
> +			pcs1: ethernet-phy at 0 {
> +				reg = <0>;
> +			};
> +		};
> +
>  		pcs_mdio2: mdio at 8c0b000 {
>  			compatible = "fsl,fman-memac-mdio";
>  			reg = <0x0 0x8c0b000 0x0 0x1000>;
> -- 
> 2.30.1
>