[PATCH 22/54] dt-bindings: media: Convert OV5640 binding to a schema

[Rob Herring]

On Wed, 21 Jul 2021 16:03:52 +0200, Maxime Ripard wrote:
> The Omnivision OV5640 is supported by Linux thanks to its device tree
> binding.
> 
> Now that we have the DT validation in place, let's convert the device
> tree bindings for that driver over to a YAML schema.
> 
> Cc: linux-media at vger.kernel.org
> Cc: Mauro Carvalho Chehab <mchehab at kernel.org>
> Cc: Steve Longerbeam <slongerbeam at gmail.com>
> Signed-off-by: Maxime Ripard <maxime at cerno.tech>
> ---
>  .../devicetree/bindings/media/i2c/ov5640.txt  |  92 -----------
>  .../bindings/media/i2c/ovti,ov5640.yaml       | 154 ++++++++++++++++++
>  2 files changed, 154 insertions(+), 92 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov5640.txt
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/ti,cal.example.dt.yaml: camera-sensor at 3c: 'AVDD-supply' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/ti,cal.example.dt.yaml: camera-sensor at 3c: 'DVDD-supply' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/ti,cal.example.dt.yaml: camera-sensor at 3c: 'DOVDD-supply' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1508267

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.