[PATCH 38/54] dt-bindings: w1: Convert 1-Wire GPIO binding to a schema
Maxime Ripard
maxime at cerno.tech
Wed Jul 21 07:04:08 PDT 2021
Bitbanged 1-Wire buses are supported by Linux thanks to their device
tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: Daniel Mack <zonque at gmail.com>
Cc: Evgeniy Polyakov <zbr at ioremap.net>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
.../devicetree/bindings/w1/w1-gpio.txt | 27 ------------
.../devicetree/bindings/w1/w1-gpio.yaml | 43 +++++++++++++++++++
2 files changed, 43 insertions(+), 27 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.txt
create mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.yaml
diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.txt b/Documentation/devicetree/bindings/w1/w1-gpio.txt
deleted file mode 100644
index 3d6554eac240..000000000000
--- a/Documentation/devicetree/bindings/w1/w1-gpio.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-w1-gpio devicetree bindings
-
-Required properties:
-
- - compatible: "w1-gpio"
- - gpios: one or two GPIO specs:
- - the first one is used as data I/O pin
- - the second one is optional. If specified, it is used as
- enable pin for an external pin pullup.
-
-Optional properties:
-
- - linux,open-drain: if specified, the data pin is considered in
- open-drain mode.
-
-Also refer to the generic w1.txt document.
-
-Examples:
-
- onewire {
- compatible = "w1-gpio";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-
- battery {
- // ...
- };
- };
diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.yaml b/Documentation/devicetree/bindings/w1/w1-gpio.yaml
new file mode 100644
index 000000000000..4a780a988718
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/w1-gpio.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/w1-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bitbanged GPIO 1-Wire Bus Device Tree Bindings
+
+maintainers:
+ - Daniel Mack <zonque at gmail.com>
+
+properties:
+ compatible:
+ const: w1-gpio
+
+ gpios:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: Data I/O pin
+ - description: Enable pin for an external pull-up resistor
+
+ linux,open-drain:
+ type: boolean
+ description: >
+ If specified, the data pin is considered in open-drain mode.
+
+required:
+ - compatible
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ onewire {
+ compatible = "w1-gpio";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+...
--
2.31.1
More information about the linux-arm-kernel
mailing list