[PATCH 16/54] dt-bindings: input: Convert ChipOne ICN8318 binding to a schema

[Maxime Ripard]

The ChipOne ICN8318 Touchscreen Controller is supported by Linux thanks
to its device tree binding.

Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.

Cc: Dmitry Torokhov <dmitry.torokhov at gmail.com>
Cc: Hans de Goede <hdegoede at redhat.com>
Cc: linux-input at vger.kernel.org
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 .../input/touchscreen/chipone,icn8318.yaml    | 62 +++++++++++++++++++
 .../input/touchscreen/chipone_icn8318.txt     | 44 -------------
 2 files changed, 62 insertions(+), 44 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
new file mode 100644
index 000000000000..9df685bdc5db
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChipOne ICN8318 Touchscreen Controller Device Tree Bindings
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov at gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: chipone,icn8318
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - wake-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen at 40 {
+            compatible = "chipone,icn8318";
+            reg = <0x40>;
+            interrupt-parent = <&pio>;
+            interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+            pinctrl-names = "default";
+            pinctrl-0 = <&ts_wake_pin_p66>;
+            wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+            touchscreen-size-x = <800>;
+            touchscreen-size-y = <480>;
+            touchscreen-inverted-x;
+            touchscreen-swapped-x-y;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
deleted file mode 100644
index 38b0603f65f3..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* ChipOne icn8318 I2C touchscreen controller
-
-Required properties:
- - compatible		  : "chipone,icn8318"
- - reg			  : I2C slave address of the chip (0x40)
- - interrupts		  : interrupt specification for the icn8318 interrupt
- - wake-gpios		  : GPIO specification for the WAKE input
- - touchscreen-size-x	  : horizontal resolution of touchscreen (in pixels)
- - touchscreen-size-y	  : vertical resolution of touchscreen (in pixels)
-
-Optional properties:
- - pinctrl-names	  : should be "default"
- - pinctrl-0:		  : a phandle pointing to the pin settings for the
-			    control gpios
- - touchscreen-fuzz-x	  : horizontal noise value of the absolute input
-			    device (in pixels)
- - touchscreen-fuzz-y	  : vertical noise value of the absolute input
-			    device (in pixels)
- - touchscreen-inverted-x : X axis is inverted (boolean)
- - touchscreen-inverted-y : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y	  : X and Y axis are swapped (boolean)
-			    Swapping is done after inverting the axis
-
-Example:
-
-i2c at 00000000 {
-	/* ... */
-
-	chipone_icn8318 at 40 {
-		compatible = "chipone,icn8318";
-		reg = <0x40>;
-		interrupt-parent = <&pio>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_wake_pin_p66>;
-		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-	};
-
-	/* ... */
-};
-- 
2.31.1