[PATCH v1 1/3] spi: pxa2xx: Convert reset_sccr1() to use pxa2xx_spi_update()

[Andy Shevchenko]

Convert reset_sccr1() to use pxa2xx_spi_update().
It will help for further improvements.

Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
 drivers/spi/spi-pxa2xx.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 974e30744b83..7c4c8179a329 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -594,24 +594,22 @@ static int u32_reader(struct driver_data *drv_data)
 
 static void reset_sccr1(struct driver_data *drv_data)
 {
-	struct chip_data *chip =
-		spi_get_ctldata(drv_data->controller->cur_msg->spi);
-	u32 sccr1_reg;
+	struct chip_data *chip = spi_get_ctldata(drv_data->controller->cur_msg->spi);
+	u32 mask = drv_data->int_cr1;
 
-	sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1;
 	switch (drv_data->ssp_type) {
 	case QUARK_X1000_SSP:
-		sccr1_reg &= ~QUARK_X1000_SSCR1_RFT;
+		mask |= QUARK_X1000_SSCR1_RFT;
 		break;
 	case CE4100_SSP:
-		sccr1_reg &= ~CE4100_SSCR1_RFT;
+		mask |= CE4100_SSCR1_RFT;
 		break;
 	default:
-		sccr1_reg &= ~SSCR1_RFT;
+		mask |= SSCR1_RFT;
 		break;
 	}
-	sccr1_reg |= chip->threshold;
-	pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
+
+	pxa2xx_spi_update(drv_data, SSCR1, mask, chip->threshold);
 }
 
 static void int_stop_and_reset(struct driver_data *drv_data)
-- 
2.30.2