[PATCH] iio: mtk-auxadc: add mutex_destroy

[Jonathan Cameron]

On Thu, 15 Jul 2021 17:35:23 +0800
Hui Liu <hui.liu at mediatek.com> wrote:

> Add mutex_destroy when probe fail and remove device.
> 
> Signed-off-by: Hui Liu <hui.liu at mediatek.com>
Hi Hui Liu,

We very very rarely bother to call mutex_destroy().  The reason is
that it is only a non noop in when mutex debugging is enabled and
that is only useful if there is a plausible route in which it could
be used after the mutex_destroy.   Given these are both at the ends
of removal paths, I don't think this is useful.  That's why you will
rarely find mutex_destroy() being called.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/mt6577_auxadc.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/iio/adc/mt6577_auxadc.c b/drivers/iio/adc/mt6577_auxadc.c
> index 79c1dd68b909..d57243037ad6 100644
> --- a/drivers/iio/adc/mt6577_auxadc.c
> +++ b/drivers/iio/adc/mt6577_auxadc.c
> @@ -289,6 +289,7 @@ static int mt6577_auxadc_probe(struct platform_device *pdev)
>  	ret = iio_device_register(indio_dev);
>  	if (ret < 0) {
>  		dev_err(&pdev->dev, "failed to register iio device\n");
> +		mutex_destroy(&adc_dev->lock);
>  		goto err_power_off;
>  	}
>  
> @@ -313,6 +314,7 @@ static int mt6577_auxadc_remove(struct platform_device *pdev)
>  			      0, MT6577_AUXADC_PDN_EN);
>  
>  	clk_disable_unprepare(adc_dev->adc_clk);
> +	mutex_destroy(&adc_dev->lock);
>  
>  	return 0;
>  }