[PATCH] mt7530 fix mt7530_fdb_write vid missing ivl bit

[ericwouds at gmail.com]

From: Eric Woudstra <37153012+ericwoud at users.noreply.github.com>

According to reference guides mt7530 (mt7620) and mt7531:

NOTE: When IVL is reset, MAC[47:0] and FID[2:0] will be used to 
read/write the address table. When IVL is set, MAC[47:0] and CVID[11:0] 
will be used to read/write the address table.

Since the function only fills in CVID and no FID, we need to set the
IVL bit. The existing code does not set it.

This is a fix for the issue I dropped here earlier:

http://lists.infradead.org/pipermail/linux-mediatek/2021-June/025697.html

With this patch, it is now possible to delete the 'self' fdb entry
manually. However, wifi roaming still has the same issue, the entry
does not get deleted automatically. Wifi roaming also needs a fix
somewhere else to function correctly in combination with vlan.

Signed-off-by: Eric Woudstra <37153012+ericwoud at users.noreply.github.com>
---
 drivers/net/dsa/mt7530.c | 1 +
 drivers/net/dsa/mt7530.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 93136f7e6..9e4df35f9 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -366,6 +366,7 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
 	int i;
 
 	reg[1] |= vid & CVID_MASK;
+	reg[1] |= ATA2_IVL;
 	reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER;
 	reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP;
 	/* STATIC_ENT indicate that entry is static wouldn't
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 334d610a5..b19b389ff 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -79,6 +79,7 @@ enum mt753x_bpdu_port_fw {
 #define  STATIC_EMP			0
 #define  STATIC_ENT			3
 #define MT7530_ATA2			0x78
+#define  ATA2_IVL			BIT(15)
 
 /* Register for address table write data */
 #define MT7530_ATWD			0x7c
-- 
2.25.1