[PATCH] ARM: dts: stm32: Set {bitclock, frame}-master phandles on ST DKx

[Alexandre TORGUE]

On 7/15/21 5:38 PM, Marek Vasut wrote:
> On 7/15/21 5:27 PM, Alexandre TORGUE wrote:
>> Hi Marek
> 
> Hi,
> 
> [...]
> 
>>> diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi 
>>> b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
>>> index 59f18846cf5d..586aac8a998c 100644
>>> --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
>>> +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
>>> @@ -220,15 +220,15 @@ cs42l51_port: port {
>>>               cs42l51_tx_endpoint: endpoint at 0 {
>>>                   reg = <0>;
>>>                   remote-endpoint = <&sai2a_endpoint>;
>>> -                frame-master;
>>> -                bitclock-master;
>>> +                frame-master = <&cs42l51_tx_endpoint>;
>>> +                bitclock-master = <&cs42l51_tx_endpoint>;
>>>               };
>>>               cs42l51_rx_endpoint: endpoint at 1 {
>>>                   reg = <1>;
>>>                   remote-endpoint = <&sai2b_endpoint>;
>>> -                frame-master;
>>> -                bitclock-master;
>>> +                frame-master = <&cs42l51_rx_endpoint>;
>>> +                bitclock-master = <&cs42l51_rx_endpoint>;
>>>               };
>>>           };
>>>       };
>>>
>>
>> Applied on stm32-next. Thanks to update the DKx board. Note that 
>> "cirrus,cs42l51.yaml" has to be also updated. Did you also sent yaml 
>> update aside this patch ?
> 
> Nope, sorry.

No pb, we'll do.