[PATCH 2/8] i2c: mediatek: Dump i2c/dma register when a timeout occurs

Chen-Yu Tsai wenst at chromium.org
Wed Jul 14 23:21:31 PDT 2021


Hi,

On Thu, Jul 15, 2021 at 10:31 AM Kewei Xu <kewei.xu at mediatek.com> wrote:
>
> When a timeout error occurs in i2c transter, it is usually related
> to the i2c/dma IP hardware configuration. Therefore, the purpose of
> this patch is to dump the key register values of i2c/dma when a
> timeout occurs in i2c for debugging.
>
> Signed-off-by: Kewei Xu <kewei.xu at mediatek.com>
> ---
>  drivers/i2c/busses/i2c-mt65xx.c | 95 ++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 94 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> index 5ddfa4e..64acd96 100644
> --- a/drivers/i2c/busses/i2c-mt65xx.c
> +++ b/drivers/i2c/busses/i2c-mt65xx.c
> @@ -125,6 +125,7 @@ enum I2C_REGS_OFFSET {
>         OFFSET_HS,
>         OFFSET_SOFTRESET,
>         OFFSET_DCM_EN,
> +       OFFSET_MULTI_DMA,
>         OFFSET_PATH_DIR,
>         OFFSET_DEBUGSTAT,
>         OFFSET_DEBUGCTRL,
> @@ -192,6 +193,7 @@ enum I2C_REGS_OFFSET {
>         [OFFSET_TRANSFER_LEN_AUX] = 0x44,
>         [OFFSET_CLOCK_DIV] = 0x48,
>         [OFFSET_SOFTRESET] = 0x50,
> +       [OFFSET_MULTI_DMA] = 0x84,

On the datasheets I have, MULTI_DMA is 0x8c, while 0x84 is CHANNEL_SEC on
MT8192, and not defined on MT8183 nor MT8195.

>         [OFFSET_SCL_MIS_COMP_POINT] = 0x90,
>         [OFFSET_DEBUGSTAT] = 0xe0,
>         [OFFSET_DEBUGCTRL] = 0xe8,
> @@ -828,6 +830,96 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
>         return 0;
>  }
>
> +static void i2c_dump_register(struct mtk_i2c *i2c)
> +{
> +       dev_err(i2c->dev, "SLAVE_ADDR[0x%x]: 0x%x, INTR_MASK[0x%x]: 0x%x\n",
> +               OFFSET_SLAVE_ADDR,
> +               (mtk_i2c_readw(i2c, OFFSET_SLAVE_ADDR)),

Drop the extra outer parentheses. Same goes for all the other invocations.

> +               OFFSET_INTR_MASK,
> +               (mtk_i2c_readw(i2c, OFFSET_INTR_MASK)));
> +       dev_err(i2c->dev, "INTR_STAT[0x%x]: 0x%x, CONTROL[0x%x]: 0x%x\n",
> +               OFFSET_INTR_STAT,
> +               (mtk_i2c_readw(i2c, OFFSET_INTR_STAT)),
> +               OFFSET_CONTROL,
> +               (mtk_i2c_readw(i2c, OFFSET_CONTROL)));
> +       dev_err(i2c->dev, "TRANSFER_LEN[0x%x]: 0x%x, TRANSAC_LEN[0x%x]: 0x%x\n",
> +               OFFSET_TRANSFER_LEN,
> +               (mtk_i2c_readw(i2c, OFFSET_TRANSFER_LEN)),
> +               OFFSET_TRANSAC_LEN,
> +               (mtk_i2c_readw(i2c, OFFSET_TRANSAC_LEN)));
> +       dev_err(i2c->dev, "DELAY_LEN[0x%x]: 0x%x, HTIMING[0x%x]: 0x%x\n",
> +               OFFSET_DELAY_LEN,
> +               (mtk_i2c_readw(i2c, OFFSET_DELAY_LEN)),
> +               OFFSET_TIMING,
> +               (mtk_i2c_readw(i2c, OFFSET_TIMING)));
> +       dev_err(i2c->dev, "OFFSET_START[0x%x]: 0x%x\n",
> +               OFFSET_START,
> +               mtk_i2c_readw(i2c, OFFSET_START));
> +       dev_err(i2c->dev, "OFFSET_EXT_CONF[0x%x]: 0x%x\n",
> +               OFFSET_EXT_CONF,
> +               mtk_i2c_readw(i2c, OFFSET_EXT_CONF));
> +       dev_err(i2c->dev, "OFFSET_HS[0x%x]: 0x%x\n",
> +               OFFSET_HS,
> +               mtk_i2c_readw(i2c, OFFSET_HS));
> +       dev_err(i2c->dev, "OFFSET_IO_CONFIG[0x%x]: 0x%x\n",
> +               OFFSET_IO_CONFIG,
> +               mtk_i2c_readw(i2c, OFFSET_IO_CONFIG));
> +       dev_err(i2c->dev, "OFFSET_FIFO_ADDR_CLR[0x%x]: 0x%x\n",
> +               OFFSET_FIFO_ADDR_CLR,
> +               mtk_i2c_readw(i2c, OFFSET_FIFO_ADDR_CLR));
> +       dev_err(i2c->dev, "TRANSFER_LEN_AUX[0x%x]: 0x%x\n",
> +               OFFSET_TRANSFER_LEN_AUX,
> +               mtk_i2c_readw(i2c, OFFSET_TRANSFER_LEN_AUX));
> +       dev_err(i2c->dev, "CLOCK_DIV[0x%x]: 0x%x\n",
> +               OFFSET_CLOCK_DIV,
> +               mtk_i2c_readw(i2c, OFFSET_CLOCK_DIV));
> +       dev_err(i2c->dev, "FIFO_STAT[0x%x]: 0x%x, FIFO_THRESH[0x%x]: 0x%x\n",
> +               OFFSET_FIFO_STAT,
> +               mtk_i2c_readw(i2c, OFFSET_FIFO_STAT),
> +               OFFSET_FIFO_THRESH,
> +               mtk_i2c_readw(i2c, OFFSET_FIFO_THRESH));
> +       dev_err(i2c->dev, "DCM_EN[0x%x] 0x%x\n",
> +               OFFSET_DCM_EN,
> +               mtk_i2c_readw(i2c, OFFSET_DCM_EN));
> +       dev_err(i2c->dev, "DEBUGSTAT[0x%x]: 0x%x, DEBUGCTRL[0x%x]: 0x%x\n",

Nit: Why do some have two registers per line, and some only have one?

ChenYu


> +               OFFSET_DEBUGSTAT,
> +               (mtk_i2c_readw(i2c, OFFSET_DEBUGSTAT)),
> +               OFFSET_DEBUGCTRL,
> +               (mtk_i2c_readw(i2c, OFFSET_DEBUGCTRL)));
> +
> +       if (i2c->dev_comp->regs == mt_i2c_regs_v2) {
> +               dev_err(i2c->dev, "OFFSET_LTIMING[0x%x]: 0x%x\n",
> +                       OFFSET_LTIMING,
> +                       mtk_i2c_readw(i2c, OFFSET_LTIMING));
> +               dev_err(i2c->dev, "MULTI_DMA[0x%x]: 0x%x\n",
> +                       OFFSET_MULTI_DMA,
> +                       (mtk_i2c_readw(i2c, OFFSET_MULTI_DMA)));
> +       }
> +
> +       dev_err(i2c->dev, "OFFSET_INT_FLAG = 0x%x\n",
> +               readl(i2c->pdmabase + OFFSET_INT_FLAG));
> +       dev_err(i2c->dev, "OFFSET_INT_EN = 0x%x\n",
> +               readl(i2c->pdmabase + OFFSET_INT_EN));
> +       dev_err(i2c->dev, "OFFSET_EN = 0x%x\n",
> +               readl(i2c->pdmabase + OFFSET_EN));
> +       dev_err(i2c->dev, "OFFSET_RST = 0x%x\n",
> +               readl(i2c->pdmabase + OFFSET_RST));
> +       dev_err(i2c->dev, "OFFSET_CON = 0x%x\n",
> +               readl(i2c->pdmabase + OFFSET_CON));
> +       dev_err(i2c->dev, "OFFSET_TX_MEM_ADDR = 0x%x\n",
> +               readl(i2c->pdmabase + OFFSET_TX_MEM_ADDR));
> +       dev_err(i2c->dev, "OFFSET_RX_MEM_ADDR = 0x%x\n",
> +               readl(i2c->pdmabase + OFFSET_RX_MEM_ADDR));
> +       dev_err(i2c->dev, "OFFSET_TX_LEN = 0x%x\n",
> +               readl(i2c->pdmabase + OFFSET_TX_LEN));
> +       dev_err(i2c->dev, "OFFSET_RX_LEN = 0x%x\n",
> +               readl(i2c->pdmabase + OFFSET_RX_LEN));
> +       dev_err(i2c->dev, "OFFSET_TX_4G_MODE = 0x%x\n",
> +               readl(i2c->pdmabase + OFFSET_TX_4G_MODE));
> +       dev_err(i2c->dev, "OFFSET_RX_4G_MODE = 0x%x\n",
> +               readl(i2c->pdmabase + OFFSET_RX_4G_MODE));
> +}
> +
>  static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>                                int num, int left_num)
>  {
> @@ -1034,7 +1126,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>         }
>
>         if (ret == 0) {
> -               dev_dbg(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
> +               dev_err(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
> +               i2c_dump_register(i2c);
>                 mtk_i2c_init_hw(i2c);
>                 return -ETIMEDOUT;
>         }
> --
> 1.9.1
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek



More information about the linux-arm-kernel mailing list