[PATCH AUTOSEL 5.12 070/102] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15

Sasha Levin sashal at kernel.org
Wed Jul 14 12:40:03 PDT 2021


From: Alexandre Torgue <alexandre.torgue at foss.st.com>

[ Upstream commit fb1406335c067be074eab38206cf9abfdce2fb0b ]

It fixes the following warning seen running "make dtbs_check W=1"

Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty
reg/ranges property

Signed-off-by: Alexandre Torgue <alexandre.torgue at foss.st.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arm/boot/dts/stm32mp151.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 4b8031782555..1f05bb360e18 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1405,12 +1405,6 @@ crc1: crc at 58009000 {
 			status = "disabled";
 		};
 
-		stmmac_axi_config_0: stmmac-axi-config {
-			snps,wr_osr_lmt = <0x7>;
-			snps,rd_osr_lmt = <0x7>;
-			snps,blen = <0 0 0 0 16 8 4>;
-		};
-
 		ethernet0: ethernet at 5800a000 {
 			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
 			reg = <0x5800a000 0x2000>;
@@ -1434,6 +1428,12 @@ ethernet0: ethernet at 5800a000 {
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
+
+			stmmac_axi_config_0: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
 		};
 
 		usbh_ohci: usb at 5800c000 {
-- 
2.30.2




More information about the linux-arm-kernel mailing list