[PATCH AUTOSEL 5.12 030/102] ARM: dts: ux500: Fix interrupt cells

Sasha Levin sashal at kernel.org
Wed Jul 14 12:39:23 PDT 2021


From: Sebastian Reichel <sebastian.reichel at collabora.com>

[ Upstream commit e4ff0112a03c2e353c8457cd33c88feb89dfec41 ]

Fix interrupt cells in DT AB8500/AB8505 source files. The
compiled DTB files will stay the same.

Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arm/boot/dts/ste-ab8500.dtsi | 26 +++++++++++++-------------
 arch/arm/boot/dts/ste-ab8505.dtsi | 22 +++++++++++-----------
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 4fd09997a2b9..5c5a5a2dadfc 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -42,15 +42,15 @@ ab8500_gpio: ab8500-gpio {
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
 				gpadc: ab8500-gpadc {
 					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
-						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+						     <39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "HW_CONV_END", "SW_CONV_END";
 					vddadc-supply = <&ab8500_ldo_tvout_reg>;
 					#address-cells = <1>;
@@ -219,13 +219,13 @@ ab8500_chargalg {
 
 				ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -242,8 +242,8 @@ ab8500_usb {
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index cc045b2fc217..3380afa74c14 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -39,8 +39,8 @@ ab8505_gpio: ab8505-gpio {
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
@@ -182,13 +182,13 @@ ab8500_chargalg {
 
 				ab8500_usb: ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -205,8 +205,8 @@ ab8500_usb: ab8500_usb {
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
-- 
2.30.2




More information about the linux-arm-kernel mailing list