[PATCH] arm64: dts: fvp: Remove panel timings

[Robin Murphy]

The simple-panel driver already has hard-coded timings for
"arm,rtsm-display", and as such screams at us for trying to override a
fixed mode from DT. Since the exact values probably don't matter all
that much anyway, just remove the DT node to keep boot quiet.

Signed-off-by: Robin Murphy <robin.murphy at arm.com>
---
 arch/arm64/boot/dts/arm/fvp-base-revc.dts | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
index b8a21092db4d..2732d8e5bb5d 100644
--- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts
+++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -192,18 +192,6 @@ panel_in: endpoint {
 				remote-endpoint = <&clcd_pads>;
 			};
 		};
-
-	       panel-timing {
-		       clock-frequency = <63500127>;
-		       hactive = <1024>;
-		       hback-porch = <152>;
-		       hfront-porch = <48>;
-		       hsync-len = <104>;
-		       vactive = <768>;
-		       vback-porch = <23>;
-		       vfront-porch = <3>;
-		       vsync-len = <4>;
-	       };
 	};
 
 	bus at 8000000 {
-- 
2.25.1