[PATCH v16 05/12] dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script

[Lucas Stach]

Am Mittwoch, dem 14.07.2021 um 18:20 +0800 schrieb Robin Gong:
> Add 'fw_loaded' and 'is_ram_script' to check if the script used by channel
> is ram script and it's loaded or not, so that could prevent meaningless
> following malloc dma descriptor and bd allocate in sdma_transfer_init(),
> otherwise memory may be consumed out potentially without free in case
> that spi fallback into pio while dma transfer failed by sdma firmware not
> ready(next ERR009165 patch depends on sdma RAM scripts/firmware).
> 
> Signed-off-by: Robin Gong <yibin.gong at nxp.com>
> Acked-by: Vinod Koul <vkoul at kernel.org>

Reviewed-by: Lucas Stach <l.stach at pengutronix.de>

> ---
>  drivers/dma/imx-sdma.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index 665ccbf..d366198 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -435,6 +435,7 @@ struct sdma_channel {
>  	enum dma_status			status;
>  	struct imx_dma_data		data;
>  	struct work_struct		terminate_worker;
> +	bool				is_ram_script;
>  };
>  
>  #define IMX_DMA_SG_LOOP		BIT(0)
> @@ -498,6 +499,7 @@ struct sdma_engine {
>  	struct sdma_buffer_descriptor	*bd0;
>  	/* clock ratio for AHB:SDMA core. 1:1 is 1, 2:1 is 0*/
>  	bool				clk_ratio;
> +	bool                            fw_loaded;
>  };
>  
>  static int sdma_config_write(struct dma_chan *chan,
> @@ -918,6 +920,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
>  	sdmac->pc_to_device = 0;
>  	sdmac->device_to_device = 0;
>  	sdmac->pc_to_pc = 0;
> +	sdmac->is_ram_script = false;
>  
>  	switch (peripheral_type) {
>  	case IMX_DMATYPE_MEMORY:
> @@ -953,6 +956,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
>  	case IMX_DMATYPE_SSI_DUAL:
>  		per_2_emi = sdma->script_addrs->ssish_2_mcu_addr;
>  		emi_2_per = sdma->script_addrs->mcu_2_ssish_addr;
> +		sdmac->is_ram_script = true;
>  		break;
>  	case IMX_DMATYPE_SSI_SP:
>  	case IMX_DMATYPE_MMC:
> @@ -967,6 +971,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
>  		per_2_emi = sdma->script_addrs->asrc_2_mcu_addr;
>  		emi_2_per = sdma->script_addrs->asrc_2_mcu_addr;
>  		per_2_per = sdma->script_addrs->per_2_per_addr;
> +		sdmac->is_ram_script = true;
>  		break;
>  	case IMX_DMATYPE_ASRC_SP:
>  		per_2_emi = sdma->script_addrs->shp_2_mcu_addr;
> @@ -1363,6 +1368,11 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
>  {
>  	struct sdma_desc *desc;
>  
> +	if (!sdmac->sdma->fw_loaded && sdmac->is_ram_script) {
> +		dev_warn_once(sdmac->sdma->dev, "sdma firmware not ready!\n");
> +		goto err_out;
> +	}
> +
>  	desc = kzalloc((sizeof(*desc)), GFP_NOWAIT);
>  	if (!desc)
>  		goto err_out;
> @@ -1792,6 +1802,8 @@ static void sdma_load_firmware(const struct firmware *fw, void *context)
>  
>  	sdma_add_scripts(sdma, addr);
>  
> +	sdma->fw_loaded = true;
> +
>  	dev_info(sdma->dev, "loaded firmware %d.%d\n",
>  			header->version_major,
>  			header->version_minor);