[PATCH] ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz

[Oleksandr Suvorov]

NXP and AzureWave don't recommend using SDIO bus mode 3.3V at 50MHz due
to noise affecting the wireless throughput. Colibri iMX6ULL uses only
3.3V signaling for Wi-Fi module AW-CM276NF.

Limit the SDIO Clock on Colibri iMX6ULL to 25MHz.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
---

 arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index a0545431b3dc..9f1e38282bee 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -43,6 +43,7 @@ &usdhc2 {
 	assigned-clock-rates = <0>, <198000000>;
 	cap-power-off-card;
 	keep-power-in-suspend;
+	max-frequency = <25000000>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	no-1-8-v;
 	non-removable;
-- 
2.31.1