[PATCH v5 1/4] arm64: dts: ipq6018: correct TCSR block area

[Baruch Siach]

According to Bjorn Andersson[1], &tcsr_q6 base is 0x01937000 with size
0x21000. Adjust qcom,halt-regs offsets (add 0x8000) to match the new
syscon base.

[1] https://lore.kernel.org/r/YLgO0Aj1d4w9EcPv@yoga

Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
v5: New patch in this series
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 6ee7b99c21ec..72ac36c1be57 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -270,9 +270,9 @@ tcsr_mutex_regs: syscon at 1905000 {
 			reg = <0x0 0x01905000 0x0 0x8000>;
 		};
 
-		tcsr_q6: syscon at 1945000 {
+		tcsr_q6: syscon at 1937000 {
 			compatible = "syscon";
-			reg = <0x0 0x01945000 0x0 0xe000>;
+			reg = <0x0 0x01937000 0x0 0x21000>;
 		};
 
 		blsp_dma: dma-controller at 7884000 {
@@ -615,7 +615,7 @@ q6v5_wcss: remoteproc at cd00000 {
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "prng";
 
-			qcom,halt-regs = <&tcsr_q6 0xa000 0xd000 0x0>;
+			qcom,halt-regs = <&tcsr_q6 0x12000 0x15000 0x8000>;
 
 			qcom,smem-states = <&wcss_smp2p_out 0>,
 					   <&wcss_smp2p_out 1>;
-- 
2.30.2