[PATCH] arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)

[Robin Murphy]

On 2021-07-06 14:44, Marc Zyngier wrote:
> On 2021-07-06 14:33, Will Deacon wrote:
>> On Tue, Jul 06, 2021 at 02:29:07PM +0100, Robin Murphy wrote:
>>> On 2021-07-06 11:26, Catalin Marinas wrote:
>>> > On Tue, Jul 06, 2021 at 09:26:59AM +0000, Yassine Oudjana wrote:
>>> > > In-Reply-To: <20210527124356.22367-1-will at kernel.org>
>>> > > > Reduce ARCH_DMA_MINALIGN to 64 bytes and allow the 
>>> warning/taint to
>>> > > > indicate if there are machines that unknowingly rely on this.
>>> > >
>>> > > The warning is being triggered on Qualcomm MSM8996, as well as 
>>> the out-of-spec taint:
>>> >
>>> > Is this booting with ACPI or DT?
>>> >
>>> > > ------------[ cut here ]------------
>>> > > rtc-pm8xxx 400f000.qcom,spmi:pmic at 0:rtc at 6000: ARCH_DMA_MINALIGN 
>>> smaller than CTR_EL0.CWG (64 < 128)
>>> > > WARNING: CPU: 0 PID: 1 at arch/arm64/mm/dma-mapping.c:45 
>>> arch_setup_dma_ops+0xf8/0x10c
>>> > [...]
>>> > > This warning is triggered with nearly every driver probe, not 
>>> only rtc-pm8xxx.
>>> >
>>> > I have a suspicion none of the reported devices actually do any 
>>> DMA, so
>>> > in practice it should be safe but we need to figure out why
>>> > arch_setup_dma_ops() gets called.
>>>
>>> It gets called because there's no straightforward way to know that a
>>> platform device *isn't* DMA-capable, so we have to assume they are.
>>>
>>> I would also assume that in a Qcom SoC there really are at least some 
>>> things
>>> doing non-coherent DMA :(
>>
>> Agreed, unless this is a CPU erratum and the line size is being 
>> reported for
>> a cache beyond the PoC, then I think we're going to have to revert the 
>> patch
>> reducing ARCH_DMA_MINALIGN after all.
>>
>> I can't find much information about the original Kryo core at all...
> 
> I have similar issues with my QDF2400. The UART, RTC and DMA controllers
> are all screaming at me. I'm confident that the UART doesn't do any
> DMA (it is handled by the SBSA driver), but the DMA controllers are
> probably doing what it says on the tin.
> 
> Do we know whether Falkor and Kryo share any part of their design?

According to [1], not literally, but some of the same people being 
involved in both could plausibly imply that some basic design decisions 
might have carried over.

Robin.

[1] 
https://www.anandtech.com/show/11737/analyzing-falkors-microarchitecture-a-deep-dive-into-qualcomms-centriq-2400-for-windows-server-and-linux