[v2] PCI: Avoid unsync of LTR mechanism configuration
Mingchuang Qiao
mingchuang.qiao at mediatek.com
Sun Jan 31 22:01:26 EST 2021
On Thu, 2021-01-28 at 16:27 +0200, Mika Westerberg wrote:
> Hi,
>
> On Thu, Jan 28, 2021 at 06:05:31PM +0800, mingchuang.qiao at mediatek.com wrote:
> > From: Mingchuang Qiao <mingchuang.qiao at mediatek.com>
> >
> > In bus scan flow, the "LTR Mechanism Enable" bit of DEVCTL2 register is
> > configured in pci_configure_ltr(). If device and bridge both support LTR
> > mechanism, the "LTR Mechanism Enable" bit of device and bridge will be
> > enabled in DEVCTL2 register. And pci_dev->ltr_path will be set as 1.
> >
> > If PCIe link goes down when device resets, the "LTR Mechanism Enable" bit
> > of bridge will change to 0 according to PCIe r5.0, sec 7.5.3.16. However,
> > the pci_dev->ltr_path value of bridge is still 1.
> >
> > For following conditions, check and re-configure "LTR Mechanism Enable" bit
> > of bridge to make "LTR Mechanism Enable" bit mtach ltr_path value.
> > -before configuring device's LTR for hot-remove/hot-add
> > -before restoring device's DEVCTL2 register when restore device state
> >
> > Signed-off-by: Mingchuang Qiao <mingchuang.qiao at mediatek.com>
> > ---
> > changes of v2
> > -modify patch description
> > -reconfigure bridge's LTR before restoring device DEVCTL2 register
> > ---
> > drivers/pci/pci.c | 25 +++++++++++++++++++++++++
> > drivers/pci/probe.c | 19 ++++++++++++++++---
> > 2 files changed, 41 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index b9fecc25d213..88b4eb70c252 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -1437,6 +1437,24 @@ static int pci_save_pcie_state(struct pci_dev *dev)
> > return 0;
> > }
> >
> > +static void pci_reconfigure_bridge_ltr(struct pci_dev *dev)
> > +{
> > +#ifdef CONFIG_PCIEASPM
> > + struct pci_dev *bridge;
> > + u32 ctl;
> > +
> > + bridge = pci_upstream_bridge(dev);
> > + if (bridge && bridge->ltr_path) {
> > + pcie_capability_read_dword(bridge, PCI_EXP_DEVCTL2, &ctl);
> > + if (!(ctl & PCI_EXP_DEVCTL2_LTR_EN)) {
> > + pci_dbg(bridge, "re-enabling LTR\n");
> > + pcie_capability_set_word(bridge, PCI_EXP_DEVCTL2,
> > + PCI_EXP_DEVCTL2_LTR_EN);
> > + }
> > + }
> > +#endif
> > +}
> > +
> > static void pci_restore_pcie_state(struct pci_dev *dev)
> > {
> > int i = 0;
> > @@ -1447,6 +1465,13 @@ static void pci_restore_pcie_state(struct pci_dev *dev)
> > if (!save_state)
> > return;
> >
> > + /*
> > + * Downstream ports reset the LTR enable bit when link goes down.
> > + * Check and re-configure the bit here before restoring device.
> > + * PCIe r5.0, sec 7.5.3.16.
> > + */
> > + pci_reconfigure_bridge_ltr(dev);
> > +
> > cap = (u16 *)&save_state->cap.data[0];
> > pcie_capability_write_word(dev, PCI_EXP_DEVCTL, cap[i++]);
> > pcie_capability_write_word(dev, PCI_EXP_LNKCTL, cap[i++]);
> > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> > index 953f15abc850..4ad172517fd2 100644
> > --- a/drivers/pci/probe.c
> > +++ b/drivers/pci/probe.c
> > @@ -2132,9 +2132,22 @@ static void pci_configure_ltr(struct pci_dev *dev)
> > * Complex and all intermediate Switches indicate support for LTR.
> > * PCIe r4.0, sec 6.18.
> > */
> > - if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
> > - ((bridge = pci_upstream_bridge(dev)) &&
> > - bridge->ltr_path)) {
> > + if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
> > + pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
> > + PCI_EXP_DEVCTL2_LTR_EN);
> > + dev->ltr_path = 1;
> > + return;
> > + }
> > +
> > + bridge = pci_upstream_bridge(dev);
> > + if (bridge && bridge->ltr_path) {
> > + pcie_capability_read_dword(bridge, PCI_EXP_DEVCTL2, &ctl);
> > + if (!(ctl & PCI_EXP_DEVCTL2_LTR_EN)) {
> > + pci_dbg(bridge, "re-enabling LTR\n");
> > + pcie_capability_set_word(bridge, PCI_EXP_DEVCTL2,
> > + PCI_EXP_DEVCTL2_LTR_EN);
> > + }
> > +
>
> Can't you use pci_reconfigure_bridge_ltr() here too?
>
> Otherwise looks good.
Thanks for review. I have sent a new patch for this.
https://lore.kernel.org/linux-arm-kernel/20210129071137.8743-1-mingchuang.qiao@mediatek.com/
More information about the linux-arm-kernel
mailing list