[PATCH v12 06/10] iommu: Add a page fault handler

Auger Eric eric.auger at redhat.com
Sun Jan 31 13:29:13 EST 2021


Hi Jean,
On 1/27/21 4:43 PM, Jean-Philippe Brucker wrote:
> Some systems allow devices to handle I/O Page Faults in the core mm. For
> example systems implementing the PCIe PRI extension or Arm SMMU stall
> model. Infrastructure for reporting these recoverable page faults was
> added to the IOMMU core by commit 0c830e6b3282 ("iommu: Introduce device
> fault report API"). Add a page fault handler for host SVA.
> 
> IOMMU driver can now instantiate several fault workqueues and link them
> to IOPF-capable devices. Drivers can choose between a single global
> workqueue, one per IOMMU device, one per low-level fault queue, one per
> domain, etc.
> 
> When it receives a fault event, most commonly in an IRQ handler, the
> IOMMU driver reports the fault using iommu_report_device_fault(), which
> calls the registered handler. The page fault handler then calls the mm
> fault handler, and reports either success or failure with
> iommu_page_response(). After the handler succeeds, the hardware retries
> the access.
> 
> The iopf_param pointer could be embedded into iommu_fault_param. But
> putting iopf_param into the iommu_param structure allows us not to care
> about ordering between calls to iopf_queue_add_device() and
> iommu_register_device_fault_handler().
> 
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron at huawei.com>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe at linaro.org>
Reviewed-by: Eric Auger <eric.auger at redhat.com>

Thanks

Eric

> ---
>  drivers/iommu/Makefile        |   1 +
>  drivers/iommu/iommu-sva-lib.h |  53 ++++
>  include/linux/iommu.h         |   2 +
>  drivers/iommu/io-pgfault.c    | 461 ++++++++++++++++++++++++++++++++++
>  4 files changed, 517 insertions(+)
>  create mode 100644 drivers/iommu/io-pgfault.c
> 
> diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
> index 61bd30cd8369..60fafc23dee6 100644
> --- a/drivers/iommu/Makefile
> +++ b/drivers/iommu/Makefile
> @@ -28,3 +28,4 @@ obj-$(CONFIG_S390_IOMMU) += s390-iommu.o
>  obj-$(CONFIG_HYPERV_IOMMU) += hyperv-iommu.o
>  obj-$(CONFIG_VIRTIO_IOMMU) += virtio-iommu.o
>  obj-$(CONFIG_IOMMU_SVA_LIB) += iommu-sva-lib.o
> +obj-$(CONFIG_IOMMU_SVA_LIB) += io-pgfault.o
> diff --git a/drivers/iommu/iommu-sva-lib.h b/drivers/iommu/iommu-sva-lib.h
> index b40990aef3fd..031155010ca8 100644
> --- a/drivers/iommu/iommu-sva-lib.h
> +++ b/drivers/iommu/iommu-sva-lib.h
> @@ -12,4 +12,57 @@ int iommu_sva_alloc_pasid(struct mm_struct *mm, ioasid_t min, ioasid_t max);
>  void iommu_sva_free_pasid(struct mm_struct *mm);
>  struct mm_struct *iommu_sva_find(ioasid_t pasid);
>  
> +/* I/O Page fault */
> +struct device;
> +struct iommu_fault;
> +struct iopf_queue;
> +
> +#ifdef CONFIG_IOMMU_SVA_LIB
> +int iommu_queue_iopf(struct iommu_fault *fault, void *cookie);
> +
> +int iopf_queue_add_device(struct iopf_queue *queue, struct device *dev);
> +int iopf_queue_remove_device(struct iopf_queue *queue,
> +			     struct device *dev);
> +int iopf_queue_flush_dev(struct device *dev);
> +struct iopf_queue *iopf_queue_alloc(const char *name);
> +void iopf_queue_free(struct iopf_queue *queue);
> +int iopf_queue_discard_partial(struct iopf_queue *queue);
> +
> +#else /* CONFIG_IOMMU_SVA_LIB */
> +static inline int iommu_queue_iopf(struct iommu_fault *fault, void *cookie)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int iopf_queue_add_device(struct iopf_queue *queue,
> +					struct device *dev)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int iopf_queue_remove_device(struct iopf_queue *queue,
> +					   struct device *dev)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int iopf_queue_flush_dev(struct device *dev)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline struct iopf_queue *iopf_queue_alloc(const char *name)
> +{
> +	return NULL;
> +}
> +
> +static inline void iopf_queue_free(struct iopf_queue *queue)
> +{
> +}
> +
> +static inline int iopf_queue_discard_partial(struct iopf_queue *queue)
> +{
> +	return -ENODEV;
> +}
> +#endif /* CONFIG_IOMMU_SVA_LIB */
>  #endif /* _IOMMU_SVA_LIB_H */
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 00348e4c3c26..edc9be443a74 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -366,6 +366,7 @@ struct iommu_fault_param {
>   * struct dev_iommu - Collection of per-device IOMMU data
>   *
>   * @fault_param: IOMMU detected device fault reporting data
> + * @iopf_param:	 I/O Page Fault queue and data
>   * @fwspec:	 IOMMU fwspec data
>   * @iommu_dev:	 IOMMU device this device is linked to
>   * @priv:	 IOMMU Driver private data
> @@ -376,6 +377,7 @@ struct iommu_fault_param {
>  struct dev_iommu {
>  	struct mutex lock;
>  	struct iommu_fault_param	*fault_param;
> +	struct iopf_device_param	*iopf_param;
>  	struct iommu_fwspec		*fwspec;
>  	struct iommu_device		*iommu_dev;
>  	void				*priv;
> diff --git a/drivers/iommu/io-pgfault.c b/drivers/iommu/io-pgfault.c
> new file mode 100644
> index 000000000000..1df8c1dcae77
> --- /dev/null
> +++ b/drivers/iommu/io-pgfault.c
> @@ -0,0 +1,461 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Handle device page faults
> + *
> + * Copyright (C) 2020 ARM Ltd.
> + */
> +
> +#include <linux/iommu.h>
> +#include <linux/list.h>
> +#include <linux/sched/mm.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>
> +
> +#include "iommu-sva-lib.h"
> +
> +/**
> + * struct iopf_queue - IO Page Fault queue
> + * @wq: the fault workqueue
> + * @devices: devices attached to this queue
> + * @lock: protects the device list
> + */
> +struct iopf_queue {
> +	struct workqueue_struct		*wq;
> +	struct list_head		devices;
> +	struct mutex			lock;
> +};
> +
> +/**
> + * struct iopf_device_param - IO Page Fault data attached to a device
> + * @dev: the device that owns this param
> + * @queue: IOPF queue
> + * @queue_list: index into queue->devices
> + * @partial: faults that are part of a Page Request Group for which the last
> + *           request hasn't been submitted yet.
> + */
> +struct iopf_device_param {
> +	struct device			*dev;
> +	struct iopf_queue		*queue;
> +	struct list_head		queue_list;
> +	struct list_head		partial;
> +};
> +
> +struct iopf_fault {
> +	struct iommu_fault		fault;
> +	struct list_head		list;
> +};
> +
> +struct iopf_group {
> +	struct iopf_fault		last_fault;
> +	struct list_head		faults;
> +	struct work_struct		work;
> +	struct device			*dev;
> +};
> +
> +static int iopf_complete_group(struct device *dev, struct iopf_fault *iopf,
> +			       enum iommu_page_response_code status)
> +{
> +	struct iommu_page_response resp = {
> +		.version		= IOMMU_PAGE_RESP_VERSION_1,
> +		.pasid			= iopf->fault.prm.pasid,
> +		.grpid			= iopf->fault.prm.grpid,
> +		.code			= status,
> +	};
> +
> +	if ((iopf->fault.prm.flags & IOMMU_FAULT_PAGE_REQUEST_PASID_VALID) &&
> +	    (iopf->fault.prm.flags & IOMMU_FAULT_PAGE_RESPONSE_NEEDS_PASID))
> +		resp.flags = IOMMU_PAGE_RESP_PASID_VALID> +
> +	return iommu_page_response(dev, &resp);
> +}
> +
> +static enum iommu_page_response_code
> +iopf_handle_single(struct iopf_fault *iopf)
> +{
> +	vm_fault_t ret;
> +	struct mm_struct *mm;
> +	struct vm_area_struct *vma;
> +	unsigned int access_flags = 0;
> +	unsigned int fault_flags = FAULT_FLAG_REMOTE;
> +	struct iommu_fault_page_request *prm = &iopf->fault.prm;
> +	enum iommu_page_response_code status = IOMMU_PAGE_RESP_INVALID;
> +
> +	if (!(prm->flags & IOMMU_FAULT_PAGE_REQUEST_PASID_VALID))
> +		return status;
> +
> +	mm = iommu_sva_find(prm->pasid);
> +	if (IS_ERR_OR_NULL(mm))
> +		return status;
> +
> +	mmap_read_lock(mm);
> +
> +	vma = find_extend_vma(mm, prm->addr);
> +	if (!vma)
> +		/* Unmapped area */
> +		goto out_put_mm;
> +
> +	if (prm->perm & IOMMU_FAULT_PERM_READ)
> +		access_flags |= VM_READ;
> +
> +	if (prm->perm & IOMMU_FAULT_PERM_WRITE) {
> +		access_flags |= VM_WRITE;
> +		fault_flags |= FAULT_FLAG_WRITE;
> +	}
> +
> +	if (prm->perm & IOMMU_FAULT_PERM_EXEC) {
> +		access_flags |= VM_EXEC;
> +		fault_flags |= FAULT_FLAG_INSTRUCTION;
> +	}
> +
> +	if (!(prm->perm & IOMMU_FAULT_PERM_PRIV))
> +		fault_flags |= FAULT_FLAG_USER;
> +
> +	if (access_flags & ~vma->vm_flags)
> +		/* Access fault */
> +		goto out_put_mm;
> +
> +	ret = handle_mm_fault(vma, prm->addr, fault_flags, NULL);
> +	status = ret & VM_FAULT_ERROR ? IOMMU_PAGE_RESP_INVALID :
> +		IOMMU_PAGE_RESP_SUCCESS;
> +
> +out_put_mm:
> +	mmap_read_unlock(mm);
> +	mmput(mm);
> +
> +	return status;
> +}
> +
> +static void iopf_handle_group(struct work_struct *work)
> +{
> +	struct iopf_group *group;
> +	struct iopf_fault *iopf, *next;
> +	enum iommu_page_response_code status = IOMMU_PAGE_RESP_SUCCESS;
> +
> +	group = container_of(work, struct iopf_group, work);
> +
> +	list_for_each_entry_safe(iopf, next, &group->faults, list) {
> +		/*
> +		 * For the moment, errors are sticky: don't handle subsequent
> +		 * faults in the group if there is an error.
> +		 */
> +		if (status == IOMMU_PAGE_RESP_SUCCESS)
> +			status = iopf_handle_single(iopf);
> +
> +		if (!(iopf->fault.prm.flags &
> +		      IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE))
> +			kfree(iopf);
> +	}
> +
> +	iopf_complete_group(group->dev, &group->last_fault, status);
> +	kfree(group);
> +}
> +
> +/**
> + * iommu_queue_iopf - IO Page Fault handler
> + * @fault: fault event
> + * @cookie: struct device, passed to iommu_register_device_fault_handler.
> + *
> + * Add a fault to the device workqueue, to be handled by mm.
> + *
> + * This module doesn't handle PCI PASID Stop Marker; IOMMU drivers must discard
> + * them before reporting faults. A PASID Stop Marker (LRW = 0b100) doesn't
> + * expect a response. It may be generated when disabling a PASID (issuing a
> + * PASID stop request) by some PCI devices.
> + *
> + * The PASID stop request is issued by the device driver before unbind(). Once
> + * it completes, no page request is generated for this PASID anymore and
> + * outstanding ones have been pushed to the IOMMU (as per PCIe 4.0r1.0 - 6.20.1
> + * and 10.4.1.2 - Managing PASID TLP Prefix Usage). Some PCI devices will wait
> + * for all outstanding page requests to come back with a response before
> + * completing the PASID stop request. Others do not wait for page responses, and
> + * instead issue this Stop Marker that tells us when the PASID can be
> + * reallocated.
> + *
> + * It is safe to discard the Stop Marker because it is an optimization.
> + * a. Page requests, which are posted requests, have been flushed to the IOMMU
> + *    when the stop request completes.
> + * b. The IOMMU driver flushes all fault queues on unbind() before freeing the
> + *    PASID.
> + *
> + * So even though the Stop Marker might be issued by the device *after* the stop
> + * request completes, outstanding faults will have been dealt with by the time
> + * the PASID is freed.
> + *
> + * Return: 0 on success and <0 on error.
> + */
> +int iommu_queue_iopf(struct iommu_fault *fault, void *cookie)
> +{
> +	int ret;
> +	struct iopf_group *group;
> +	struct iopf_fault *iopf, *next;
> +	struct iopf_device_param *iopf_param;
> +
> +	struct device *dev = cookie;
> +	struct dev_iommu *param = dev->iommu;
> +
> +	lockdep_assert_held(&param->lock);
> +
> +	if (fault->type != IOMMU_FAULT_PAGE_REQ)
> +		/* Not a recoverable page fault */
> +		return -EOPNOTSUPP;
> +
> +	/*
> +	 * As long as we're holding param->lock, the queue can't be unlinked
> +	 * from the device and therefore cannot disappear.
> +	 */
> +	iopf_param = param->iopf_param;
> +	if (!iopf_param)
> +		return -ENODEV;
> +
> +	if (!(fault->prm.flags & IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE)) {
> +		iopf = kzalloc(sizeof(*iopf), GFP_KERNEL);
> +		if (!iopf)
> +			return -ENOMEM;
> +
> +		iopf->fault = *fault;
> +
> +		/* Non-last request of a group. Postpone until the last one */
> +		list_add(&iopf->list, &iopf_param->partial);
> +
> +		return 0;
> +	}
> +
> +	group = kzalloc(sizeof(*group), GFP_KERNEL);
> +	if (!group) {
> +		/*
> +		 * The caller will send a response to the hardware. But we do
> +		 * need to clean up before leaving, otherwise partial faults
> +		 * will be stuck.
> +		 */
> +		ret = -ENOMEM;
> +		goto cleanup_partial;
> +	}
> +
> +	group->dev = dev;
> +	group->last_fault.fault = *fault;
> +	INIT_LIST_HEAD(&group->faults);
> +	list_add(&group->last_fault.list, &group->faults);
> +	INIT_WORK(&group->work, iopf_handle_group);> +
> +	/* See if we have partial faults for this group */
> +	list_for_each_entry_safe(iopf, next, &iopf_param->partial, list) {
> +		if (iopf->fault.prm.grpid == fault->prm.grpid)
> +			/* Insert *before* the last fault */
> +			list_move(&iopf->list, &group->faults);
> +	}
> +
> +	queue_work(iopf_param->queue->wq, &group->work);
> +	return 0;
> +
> +cleanup_partial:
> +	list_for_each_entry_safe(iopf, next, &iopf_param->partial, list) {
> +		if (iopf->fault.prm.grpid == fault->prm.grpid) {
> +			list_del(&iopf->list);
> +			kfree(iopf);
> +		}
> +	}
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(iommu_queue_iopf);
> +
> +/**
> + * iopf_queue_flush_dev - Ensure that all queued faults have been processed
> + * @dev: the endpoint whose faults need to be flushed.
> + *
> + * The IOMMU driver calls this before releasing a PASID, to ensure that all
> + * pending faults for this PASID have been handled, and won't hit the address
> + * space of the next process that uses this PASID. The driver must make sure
> + * that no new fault is added to the queue. In particular it must flush its
> + * low-level queue before calling this function.
> + *
> + * Return: 0 on success and <0 on error.
> + */
> +int iopf_queue_flush_dev(struct device *dev)
> +{
> +	int ret = 0;
> +	struct iopf_device_param *iopf_param;
> +	struct dev_iommu *param = dev->iommu;
> +
> +	if (!param)
> +		return -ENODEV;
> +
> +	mutex_lock(&param->lock);
> +	iopf_param = param->iopf_param;
> +	if (iopf_param)
> +		flush_workqueue(iopf_param->queue->wq);
> +	else
> +		ret = -ENODEV;
> +	mutex_unlock(&param->lock);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(iopf_queue_flush_dev);
> +
> +/**
> + * iopf_queue_discard_partial - Remove all pending partial fault
> + * @queue: the queue whose partial faults need to be discarded
> + *
> + * When the hardware queue overflows, last page faults in a group may have been
> + * lost and the IOMMU driver calls this to discard all partial faults. The
> + * driver shouldn't be adding new faults to this queue concurrently.
> + *
> + * Return: 0 on success and <0 on error.
> + */
> +int iopf_queue_discard_partial(struct iopf_queue *queue)
> +{
> +	struct iopf_fault *iopf, *next;
> +	struct iopf_device_param *iopf_param;
> +
> +	if (!queue)
> +		return -EINVAL;
> +
> +	mutex_lock(&queue->lock);
> +	list_for_each_entry(iopf_param, &queue->devices, queue_list) {
> +		list_for_each_entry_safe(iopf, next, &iopf_param->partial,
> +					 list) {
> +			list_del(&iopf->list);
> +			kfree(iopf);
> +		}
> +	}
> +	mutex_unlock(&queue->lock);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(iopf_queue_discard_partial);
> +
> +/**
> + * iopf_queue_add_device - Add producer to the fault queue
> + * @queue: IOPF queue
> + * @dev: device to add
> + *
> + * Return: 0 on success and <0 on error.
> + */
> +int iopf_queue_add_device(struct iopf_queue *queue, struct device *dev)
> +{
> +	int ret = -EBUSY;
> +	struct iopf_device_param *iopf_param;
> +	struct dev_iommu *param = dev->iommu;
> +
> +	if (!param)
> +		return -ENODEV;
> +
> +	iopf_param = kzalloc(sizeof(*iopf_param), GFP_KERNEL);
> +	if (!iopf_param)
> +		return -ENOMEM;
> +
> +	INIT_LIST_HEAD(&iopf_param->partial);
> +	iopf_param->queue = queue;
> +	iopf_param->dev = dev;
> +
> +	mutex_lock(&queue->lock);
> +	mutex_lock(&param->lock);
> +	if (!param->iopf_param) {
> +		list_add(&iopf_param->queue_list, &queue->devices);
> +		param->iopf_param = iopf_param;
> +		ret = 0;
> +	}
> +	mutex_unlock(&param->lock);
> +	mutex_unlock(&queue->lock);
> +
> +	if (ret)
> +		kfree(iopf_param);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(iopf_queue_add_device);
> +
> +/**
> + * iopf_queue_remove_device - Remove producer from fault queue
> + * @queue: IOPF queue
> + * @dev: device to remove
> + *
> + * Caller makes sure that no more faults are reported for this device.
> + *
> + * Return: 0 on success and <0 on error.
> + */
> +int iopf_queue_remove_device(struct iopf_queue *queue, struct device *dev)
> +{
> +	int ret = -EINVAL;
> +	struct iopf_fault *iopf, *next;
> +	struct iopf_device_param *iopf_param;
> +	struct dev_iommu *param = dev->iommu;
> +
> +	if (!param || !queue)
> +		return -EINVAL;
> +
> +	mutex_lock(&queue->lock);
> +	mutex_lock(&param->lock);
> +	iopf_param = param->iopf_param;
> +	if (iopf_param && iopf_param->queue == queue) {
> +		list_del(&iopf_param->queue_list);
> +		param->iopf_param = NULL;
> +		ret = 0;
> +	}
> +	mutex_unlock(&param->lock);
> +	mutex_unlock(&queue->lock);
> +	if (ret)
> +		return ret;
> +
> +	/* Just in case some faults are still stuck */
> +	list_for_each_entry_safe(iopf, next, &iopf_param->partial, list)
> +		kfree(iopf);
> +
> +	kfree(iopf_param);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(iopf_queue_remove_device);
> +
> +/**
> + * iopf_queue_alloc - Allocate and initialize a fault queue
> + * @name: a unique string identifying the queue (for workqueue)
> + *
> + * Return: the queue on success and NULL on error.
> + */
> +struct iopf_queue *iopf_queue_alloc(const char *name)
> +{
> +	struct iopf_queue *queue;
> +
> +	queue = kzalloc(sizeof(*queue), GFP_KERNEL);
> +	if (!queue)
> +		return NULL;
> +
> +	/*
> +	 * The WQ is unordered because the low-level handler enqueues faults by
> +	 * group. PRI requests within a group have to be ordered, but once
> +	 * that's dealt with, the high-level function can handle groups out of
> +	 * order.
> +	 */
> +	queue->wq = alloc_workqueue("iopf_queue/%s", WQ_UNBOUND, 0, name);
> +	if (!queue->wq) {
> +		kfree(queue);
> +		return NULL;
> +	}
> +
> +	INIT_LIST_HEAD(&queue->devices);
> +	mutex_init(&queue->lock);
> +
> +	return queue;
> +}
> +EXPORT_SYMBOL_GPL(iopf_queue_alloc);
> +
> +/**
> + * iopf_queue_free - Free IOPF queue
> + * @queue: queue to free
> + *
> + * Counterpart to iopf_queue_alloc(). The driver must not be queuing faults or
> + * adding/removing devices on this queue anymore.
> + */
> +void iopf_queue_free(struct iopf_queue *queue)
> +{
> +	struct iopf_device_param *iopf_param, *next;
> +
> +	if (!queue)
> +		return;
> +
> +	list_for_each_entry_safe(iopf_param, next, &queue->devices, queue_list)
> +		iopf_queue_remove_device(queue, iopf_param->dev);
> +
> +	destroy_workqueue(queue->wq);
> +	kfree(queue);
> +}
> +EXPORT_SYMBOL_GPL(iopf_queue_free);
> 




More information about the linux-arm-kernel mailing list