Fail to boot on bpim3 with next-20210128
Samuel Holland
samuel at sholland.org
Sat Jan 30 15:58:50 EST 2021
On 1/30/21 11:00 AM, Corentin Labbe wrote:
> Hello
>
> next-20210128 cannot be booted on my bpim3.
> It start booting then freeze.
>
> [ 0.000000] Linux version 5.11.0-rc5-03084-g7426957d237f (compile at Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r2 p4) 9.3.0, GNU ld (Gentoo 2.34 p6) 2.34.0) #390 SMP Sat Jan 30 14:59:48 CET 2021
> [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
> [ 0.000000] CPU: div instructions available: patching division code
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> [ 0.000000] OF: fdt: Machine model: Banana Pi BPI-M3
> [ 0.000000] earlycon: uart0 at MMIO32 0x01c28000 (options '')
> [ 0.000000] printk: bootconsole [uart0] enabled
> [ 0.000000] Memory policy: Data cache writealloc
> [ 0.000000] cma: Reserved 16 MiB at 0xbf000000
> [ 0.000000] Zone ranges:
> [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff]
> [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
> [ 0.000000] percpu: Embedded 15 pages/cpu s31244 r8192 d22004 u61440
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752
> [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 earlycon=uart,mmio32,0x01c28000 ip=dhcp
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [ 0.000000] Memory: 2021376K/2097152K available (7168K kernel code, 934K rwdata, 2316K rodata, 1024K init, 240K bss, 59392K reserved, 16384K cma-reserved, 1294336K highmem)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> [ 0.000000] rcu: Hierarchical RCU implementation.
> [ 0.000000] rcu: RCU event tracing is enabled.
> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> [ 0.000000] random: get_random_bytes called from start_kernel+0x350/0x4e0 with crng_init=0
> [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
> [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> [ 0.008640] Switching to timer-based delay loop, resolution 41ns
> [ 0.015437] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
> [ 0.025858] Console: colour dummy device 80x30
> [ 0.030736] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
> [ 0.041941] pid_max: default: 32768 minimum: 301
> [ 0.047080] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> [ 0.054990] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> [ 0.064421] CPU: Testing write buffer coherency: ok
> [ 0.070242] /cpus/cpu at 0 missing clock-frequency property
> [ 0.076025] /cpus/cpu at 1 missing clock-frequency property
> [ 0.081805] /cpus/cpu at 2 missing clock-frequency property
> [ 0.087546] /cpus/cpu at 3 missing clock-frequency property
> [ 0.093300] /cpus/cpu at 100 missing clock-frequency property
> [ 0.099227] /cpus/cpu at 101 missing clock-frequency property
> [ 0.105173] /cpus/cpu at 102 missing clock-frequency property
> [ 0.111111] /cpus/cpu at 103 missing clock-frequency property
> [ 0.117026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [ 0.123888] Setting up static identity map for 0x40100000 - 0x40100060
> [ 0.131237] ARM CCI driver probed
> [ 0.135530] sunxi multi cluster SMP support installed
> [ 0.141501] rcu: Hierarchical SRCU implementation.
> [ 0.147277] smp: Bringing up secondary CPUs ...
> [ 0.153237] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [ 0.154443] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
> [ 0.155544] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
> [ 0.156837] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
> [ 0.158221] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
> [ 0.159456] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
> [ 0.160663] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
> [ 0.160825] smp: Brought up 1 node, 8 CPUs
> [ 0.207953] SMP: Total of 8 processors activated (384.00 BogoMIPS).
> [ 0.214714] CPU: All CPU(s) started in SVC mode.
> [ 0.221355] devtmpfs: initialized
> [ 0.232737] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
> [ 0.241442] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> [ 0.252094] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
> [ 0.261021] pinctrl core: initialized pinctrl subsystem
> [ 0.268330] NET: Registered protocol family 16
> [ 0.275235] DMA: preallocated 256 KiB pool for atomic coherent allocations
> [ 0.284035] thermal_sys: Registered thermal governor 'step_wise'
> [ 0.285104] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
> [ 0.300247] hw-breakpoint: maximum watchpoint size is 8 bytes.
> [ 0.316313] irq: type mismatch, failed to map hwirq-0 for interrupt-controller at 1f00c00!
> [ 0.328179] irq: type mismatch, failed to map hwirq-0 for interrupt-controller at 1f00c00!
[...]
> I bisected the problem to:
> ARM: dts: sunxi: Move wakeup-capable IRQs to r_intc
>
> Reverting it permit a successfully boot.
This is due to next-20210128 including the device tree updates from
sunxi/sunxi/dt-for-5.12-late, but not the new driver from
irqchip/irq/irqchip-5.12. From [1]:
Merging irqchip/irq/irqchip-next (599b3063adf4 irqchip/mips-cpu: Set IPI
domain parent chip)
Where 599b3063adf4 is tag: irqchip-fixes-5.11-1.
Since then, irqchip/irq/irqchip-next has been updated to
irqchip/irq/irqchip-5.12, so this will be resolved in the next
linux-next release.
Cheers,
Samuel
[1]: https://lore.kernel.org/lkml/20210128201131.608c16ee@canb.auug.org.au/
More information about the linux-arm-kernel
mailing list