[PATCH v5 6/8] regulator: mt6359: Add support for MT6359 regulator
Nicolas Boichat
drinkcat at chromium.org
Thu Jan 28 22:51:20 EST 2021
On Fri, Jan 22, 2021 at 7:27 PM Hsin-Hsiung Wang
<hsin-hsiung.wang at mediatek.com> wrote:
>
> From: Wen Su <wen.su at mediatek.com>
>
> The MT6359 is a regulator found on boards based on MediaTek MT6779 and
> probably other SoCs. It is a so called pmic and connects as a slave to
> SoC using SPI, wrapped inside the pmic-wrapper.
>
> Signed-off-by: Wen Su <wen.su at mediatek.com>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang at mediatek.com>
> ---
> changes since v4:
> - add enable time of ldo.
> - use the device of mfd driver for the regulator_config.
> - add the regulators_node support.
This doesn't build at all, please at least compile test before sending
new revisions.
> ---
> drivers/regulator/Kconfig | 9 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/mt6359-regulator.c | 669 +++++++++++++++++++++
> include/linux/regulator/mt6359-regulator.h | 58 ++
> 4 files changed, 737 insertions(+)
> create mode 100644 drivers/regulator/mt6359-regulator.c
> create mode 100644 include/linux/regulator/mt6359-regulator.h
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 53fa84f4d1e1..3de7bb5be8ac 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -750,6 +750,15 @@ config REGULATOR_MT6358
> This driver supports the control of different power rails of device
> through regulator interface.
>
> +config REGULATOR_MT6359
> + tristate "MediaTek MT6359 PMIC"
> + depends on MFD_MT6397
> + help
> + Say y here to select this option to enable the power regulator of
> + MediaTek MT6359 PMIC.
> + This driver supports the control of different power rails of device
> + through regulator interface.
> +
> config REGULATOR_MT6360
> tristate "MT6360 SubPMIC Regulator"
> depends on MFD_MT6360
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 680e539f6579..4f65eaead82d 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -91,6 +91,7 @@ obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
> obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
> obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
> obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
> +obj-$(CONFIG_REGULATOR_MT6359) += mt6359-regulator.o
> obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
> obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
> obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
> diff --git a/drivers/regulator/mt6359-regulator.c b/drivers/regulator/mt6359-regulator.c
> new file mode 100644
> index 000000000000..fabc3f57f334
> --- /dev/null
> +++ b/drivers/regulator/mt6359-regulator.c
> @@ -0,0 +1,669 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (c) 2020 MediaTek Inc.
> +
> +#include <linux/platform_device.h>
> +#include <linux/mfd/mt6359/registers.h>
> +#include <linux/mfd/mt6397/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/mt6359-regulator.h>
> +#include <linux/regulator/of_regulator.h>
> +
> +#define MT6359_BUCK_MODE_AUTO 0
> +#define MT6359_BUCK_MODE_FORCE_PWM 1
> +#define MT6359_BUCK_MODE_NORMAL 0
> +#define MT6359_BUCK_MODE_LP 2
> +
> +/*
> + * MT6359 regulators' information
> + *
> + * @desc: standard fields of regulator description.
> + * @status_reg: for query status of regulators.
> + * @qi: Mask for query enable signal status of regulators.
> + * @modeset_reg: for operating AUTO/PWM mode register.
> + * @modeset_mask: MASK for operating modeset register.
> + * @modeset_shift: SHIFT for operating modeset register.
> + */
> +struct mt6359_regulator_info {
> + struct regulator_desc desc;
> + u32 status_reg;
> + u32 qi;
> + u32 modeset_reg;
> + u32 modeset_mask;
> + u32 modeset_shift;
> + u32 lp_mode_reg;
> + u32 lp_mode_mask;
> + u32 lp_mode_shift;
> +};
> +
> +#define MT6359_BUCK(match, _name, min, max, step, min_sel, \
> + volt_ranges, _enable_reg, _status_reg, \
> + _vsel_reg, _vsel_mask, \
> + _lp_mode_reg, _lp_mode_shift, \
> + _modeset_reg, _modeset_shift) \
> +[MT6359_ID_##_name] = { \
> + .desc = { \
> + .name = #_name, \
> + .of_match = of_match_ptr(match), \
> + .regulators_node = of_match_ptr("regulators"), \
> + .ops = &mt6359_volt_range_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = MT6359_ID_##_name, \
> + .owner = THIS_MODULE, \
> + .uV_step = (step), \
> + .linear_min_sel = (min_sel), \
> + .linear_min_sel = (min_sel), \
> + .n_voltages = ((max) - (min)) / (step) + 1, \
> + .linear_min_sel = (min_sel), \
> + .n_voltages = ((max) - (min)) / (step) + 1, \
> + .min_uV = (min), \
> + .linear_ranges = volt_ranges, \
> + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
> + .vsel_reg = _vsel_reg, \
> + .vsel_mask = _vsel_mask, \
> + .enable_reg = _enable_reg, \
> + .enable_mask = BIT(0), \
> + .of_map_mode = mt6359_map_mode, \
> + .of_map_mode = mt6359_map_mode, \
> + }, \
> + .status_reg = _status_reg, \
> + .qi = BIT(0), \
> + .lp_mode_reg = _lp_mode_reg, \
> + .lp_mode_reg = _lp_mode_reg, \
> + .lp_mode_mask = BIT(_lp_mode_shift), \
> + .lp_mode_reg = _lp_mode_reg, \
Repeated 3 times.
> + .lp_mode_mask = BIT(_lp_mode_shift), \
Repeated twice.
> + .lp_mode_shift = _lp_mode_shift, \
> + .modeset_reg = _modeset_reg, \
> + .modeset_mask = BIT(_modeset_shift), \
> + .modeset_shift = _modeset_shift \
> +}
> +
> +#define MT6359_LDO_LINEAR(match, _name, min, max, step, min_sel,\
> +#define MT6359_LDO_LINEAR(match, _name, min, max, step, min_sel,\
Repeated twice
> + volt_ranges, _enable_reg, _status_reg, \
> + _vsel_reg, _vsel_mask) \
> + _vsel_reg, _vsel_mask) \
> +[MT6359_ID_##_name] = { \
> + .desc = { \
> + .desc = { \
> + .name = #_name, \
> + .of_match = of_match_ptr(match), \
> + .of_match = of_match_ptr(match), \
> + .regulators_node = of_match_ptr("regulators"), \
> + .ops = &mt6359_volt_range_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = MT6359_ID_##_name, \
> + .owner = THIS_MODULE, \
> + .owner = THIS_MODULE, \
> + .uV_step = (step), \
> + .linear_min_sel = (min_sel), \
> + .n_voltages = ((max) - (min)) / (step) + 1, \
> + .min_uV = (min), \
> + .linear_ranges = volt_ranges, \
> + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
> + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
> + .vsel_reg = _vsel_reg, \
> + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
> + .vsel_reg = _vsel_reg, \
> + .vsel_mask = _vsel_mask, \
> + .enable_reg = _enable_reg, \
> + .enable_mask = BIT(0), \
> + }, \
> + .status_reg = _status_reg, \
> + .status_reg = _status_reg, \
> + .qi = BIT(0), \
> + .status_reg = _status_reg, \
> + .qi = BIT(0), \
> +}
> +
> +#define MT6359_LDO(match, _name, _volt_table, \
> + _enable_reg, _enable_mask, _status_reg, \
> + _vsel_reg, _vsel_mask, _en_delay) \
> +[MT6359_ID_##_name] = { \
> +[MT6359_ID_##_name] = { \
Repeated twice
> + .desc = { \
> + .name = #_name, \
> + .of_match = of_match_ptr(match), \
> + .of_match = of_match_ptr(match), \
> + .regulators_node = of_match_ptr("regulators"), \
> + .ops = &mt6359_volt_table_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = MT6359_ID_##_name, \
> + .owner = THIS_MODULE, \
> + .n_voltages = ARRAY_SIZE(_volt_table), \
> + .n_voltages = ARRAY_SIZE(_volt_table), \
> + .volt_table = _volt_table, \
> + .n_voltages = ARRAY_SIZE(_volt_table), \
> + .volt_table = _volt_table, \
> + .vsel_reg = _vsel_reg, \
> + .vsel_mask = _vsel_mask, \
> + .enable_reg = _enable_reg, \
> + .enable_mask = BIT(_enable_mask), \
> + .enable_time = _en_delay, \
> + }, \
> + .status_reg = _status_reg, \
> + .qi = BIT(0), \
> +}
> +
> +#define MT6359_REG_FIXED(match, _name, _enable_reg, \
> + _status_reg, _fixed_volt) \
> +[MT6359_ID_##_name] = { \
> +[MT6359_ID_##_name] = { \
> + .desc = { \
> + .name = #_name, \
> + .name = #_name, \
> + .of_match = of_match_ptr(match), \
> + .regulators_node = of_match_ptr("regulators"), \
> + .ops = &mt6359_volt_fixed_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = MT6359_ID_##_name, \
> + .id = MT6359_ID_##_name, \
> + .owner = THIS_MODULE, \
> + .n_voltages = 1, \
> + .enable_reg = _enable_reg, \
> + .enable_mask = BIT(0), \
> + .fixed_uV = (_fixed_volt), \
> + }, \
> + .status_reg = _status_reg, \
> + .status_reg = _status_reg, \
> + .qi = BIT(0), \
> +}
> +
> +static const struct linear_range mt_volt_range1[] = {
> + REGULATOR_LINEAR_RANGE(800000, 0, 0x70, 12500),
> +};
> +};
> +
> +static const struct linear_range mt_volt_range2[] = {
> + REGULATOR_LINEAR_RANGE(400000, 0, 0x7f, 6250),
> +};
> +
> +static const struct linear_range mt_volt_range3[] = {
> + REGULATOR_LINEAR_RANGE(400000, 0, 0x70, 6250),
> +};
> +
> +static const struct linear_range mt_volt_range4[] = {
> + REGULATOR_LINEAR_RANGE(800000, 0, 0x40, 12500),
> +};
> +
> +static const struct linear_range mt_volt_range5[] = {
> +static const struct linear_range mt_volt_range5[] = {
This is repeated twice.
> + REGULATOR_LINEAR_RANGE(500000, 0, 0x3F, 50000),
> +};
> +
> [snip]
More information about the linux-arm-kernel
mailing list