[PATCH v10 7/9] drm/mediatek: enable dither function

CK Hu ck.hu at mediatek.com
Thu Jan 28 01:01:09 EST 2021


Hi, Hsin-Yi:

On Wed, 2021-01-27 at 12:54 +0800, Hsin-Yi Wang wrote:
> From: Yongqiang Niu <yongqiang.niu at mediatek.com>
> 
> for 5 or 6 bpc panel, we need enable dither function
> to improve the display quality
> 
> Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> Signed-off-by: Hsin-Yi Wang <hsinyi at chromium.org>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 37 ++++++++++++++++++++-
>  1 file changed, 36 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 8173f709272be..ee54505412dcd 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -53,7 +53,9 @@
>  #define DITHER_EN				BIT(0)
>  #define DISP_DITHER_CFG				0x0020
>  #define DITHER_RELAY_MODE			BIT(0)
> +#define DITHER_ENGINE_EN			BIT(1)
>  #define DISP_DITHER_SIZE			0x0030
> +#define DITHER_REG(idx)				(0x100 + (idx) * 4)
>  
>  #define LUT_10BIT_MASK				0x03ff
>  
> @@ -313,8 +315,41 @@ static void mtk_dither_config(struct device *dev, unsigned int w,
>  {
>  	struct mtk_ddp_comp_dev *priv = dev_get_drvdata(dev);
>  
> +	bool enable = true;
> +
> +	const u32 dither_setting[] = {
> +		0x00000000, /* 5 */
> +		0x00003002, /* 6 */
> +		0x00000000, /* 7 */
> +		0x00000000, /* 8 */
> +		0x00000000, /* 9 */
> +		0x00000000, /* 10 */
> +		0x00000000, /* 11 */
> +		0x00000011, /* 12 */
> +		0x00000000, /* 13 */
> +		0x00000000, /* 14 */

Could you explain what is this?

> +	};
> +
> +	if (bpc == 6) {
> +		mtk_ddp_write(cmdq_pkt, 0x40400001, &priv->cmdq_reg, priv->regs, DITHER_REG(15));
> +		mtk_ddp_write(cmdq_pkt, 0x40404040, &priv->cmdq_reg, priv->regs, DITHER_REG(16));
> +	} else if (bpc == 5) {
> +		mtk_ddp_write(cmdq_pkt, 0x50500001, &priv->cmdq_reg, priv->regs, DITHER_REG(15));
> +		mtk_ddp_write(cmdq_pkt, 0x50504040, &priv->cmdq_reg, priv->regs, DITHER_REG(16));

This looks very similar to the code in mtk_dither_set(), could you
symbolize this magic number like mtk_dither_set()?

Regards,
CK

> +	} else {
> +		enable = false;
> +	}
> +
> +	if (enable) {
> +		u32 idx;
> +
> +		for (idx = 0; idx < ARRAY_SIZE(dither_setting); idx++)
> +			mtk_ddp_write(cmdq_pkt, dither_setting[idx], &priv->cmdq_reg, priv->regs,
> +				      DITHER_REG(idx + 5));
> +	}
> +
>  	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, DISP_DITHER_SIZE);
> -	mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg, priv->regs, DISP_DITHER_CFG);
> +        mtk_ddp_write(cmdq_pkt, enable ? DITHER_ENGINE_EN : DITHER_RELAY_MODE, &priv->cmdq_reg, priv->regs, DISP_DITHER_CFG);
>  }
>  
>  static void mtk_dither_start(struct device *dev)



More information about the linux-arm-kernel mailing list