[PATCH v3 20/22] arm64: dts: sdm845: Add CAMSS ISP node

[Robert Foss]

Add the camss dt node for sdm845.

Signed-off-by: Robert Foss <robert.foss at linaro.org>
---

Changes since v1
 - Laurent: Fix subject
 - Laurent: Remove redundant regulator labels
 - Laurent: Remove empty line


 arch/arm64/boot/dts/qcom/sdm845.dtsi | 130 +++++++++++++++++++++++++++
 1 file changed, 130 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index bcf888381f14..1ead2c77d068 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3911,6 +3911,136 @@ videocc: clock-controller at ab00000 {
 			#reset-cells = <1>;
 		};
 
+		camss: camss at a00000 {
+			compatible = "qcom,sdm845-camss";
+			reg = <0 0xacb3000 0 0x1000>,
+				<0 0xacba000 0 0x1000>,
+				<0 0xacc8000 0 0x1000>,
+				<0 0xac65000 0 0x1000>,
+				<0 0xac66000 0 0x1000>,
+				<0 0xac67000 0 0x1000>,
+				<0 0xac68000 0 0x1000>,
+				<0 0xacaf000 0 0x4000>,
+				<0 0xacb6000 0 0x4000>,
+				<0 0xacc4000 0 0x4000>;
+			reg-names = "csid0",
+				"csid1",
+				"csid2",
+				"csiphy0",
+				"csiphy1",
+				"csiphy2",
+				"csiphy3",
+				"vfe0",
+				"vfe1",
+				"vfe_lite";
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "csid0",
+				"csid1",
+				"csid2",
+				"csiphy0",
+				"csiphy1",
+				"csiphy2",
+				"csiphy3",
+				"vfe0",
+				"vfe1",
+				"vfe_lite";
+			power-domains = <&clock_camcc IFE_0_GDSC>,
+				<&clock_camcc IFE_1_GDSC>,
+				<&clock_camcc TITAN_TOP_GDSC>;
+			clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+				<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+				<&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
+				<&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
+				<&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
+				<&clock_camcc CAM_CC_CSIPHY0_CLK>,
+				<&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				<&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+				<&clock_camcc CAM_CC_CSIPHY1_CLK>,
+				<&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				<&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+				<&clock_camcc CAM_CC_CSIPHY2_CLK>,
+				<&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				<&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+				<&clock_camcc CAM_CC_CSIPHY3_CLK>,
+				<&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				<&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
+				<&gcc GCC_CAMERA_AHB_CLK>,
+				<&gcc GCC_CAMERA_AXI_CLK>,
+				<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				<&clock_camcc CAM_CC_SOC_AHB_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
+				<&clock_camcc CAM_CC_IFE_1_CLK>,
+				<&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				<&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_LITE_CLK>,
+				<&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+				<&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				"cpas_ahb",
+				"cphy_rx_src",
+				"csi0",
+				"csi0_src",
+				"csi1",
+				"csi1_src",
+				"csi2",
+				"csi2_src",
+				"csiphy0",
+				"csiphy0_timer",
+				"csiphy0_timer_src",
+				"csiphy1",
+				"csiphy1_timer",
+				"csiphy1_timer_src",
+				"csiphy2",
+				"csiphy2_timer",
+				"csiphy2_timer_src",
+				"csiphy3",
+				"csiphy3_timer",
+				"csiphy3_timer_src",
+				"gcc_camera_ahb",
+				"gcc_camera_axi",
+				"slow_ahb_src",
+				"soc_ahb",
+				"vfe0_axi",
+				"vfe0",
+				"vfe0_cphy_rx",
+				"vfe0_src",
+				"vfe1_axi",
+				"vfe1",
+				"vfe1_cphy_rx",
+				"vfe1_src",
+				"vfe_lite",
+				"vfe_lite_cphy_rx",
+				"vfe_lite_src";
+
+			iommus = <&apps_smmu 0x0808 0x0>,
+				 <&apps_smmu 0x0810 0x8>,
+				 <&apps_smmu 0x0c08 0x0>,
+				 <&apps_smmu 0x0c10 0x8>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		cci: cci at ac4a000 {
 			compatible = "qcom,sdm845-cci";
 			#address-cells = <1>;
-- 
2.27.0