[PATCH v3 08/14] dt-bindings: display: bridge: Add i.MX8qxp pixel link to DPI binding

[Liu Ying]

This patch adds bindings for i.MX8qxp pixel link to DPI(PXL2DPI).

Signed-off-by: Liu Ying <victor.liu at nxp.com>
---
v2->v3:
* Drop 'fsl,syscon' property. (Rob)
* Mention the CSR module controls PXL2DPI.

v1->v2:
* Use graph schema. (Laurent)

 .../display/bridge/fsl,imx8qxp-pxl2dpi.yaml        | 102 +++++++++++++++++++++
 1 file changed, 102 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
new file mode 100644
index 00000000..6112095
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface
+
+maintainers:
+  - Liu Ying <victor.liu at nxp.com>
+
+description: |
+  The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI)
+  interfaces the pixel link 36-bit data output and the DSI controller’s
+  MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module
+  used in LVDS mode, to remap the pixel color codings between those modules.
+  This module is purely combinatorial.
+
+  The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the PXL2DPI's configuration
+  register.
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-pxl2dpi
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-pxl2dpi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion PXL2DPI which is used by downstream
+      LVDS Display Bridge(LDB) in split mode.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port at 0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI input port node from pixel link.
+
+      port at 1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI output port node to downstream bridge.
+
+    required:
+      - port at 0
+      - port at 1
+
+required:
+  - compatible
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pxl2dpi {
+        compatible = "fsl,imx8qxp-pxl2dpi";
+        power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port at 0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint at 0 {
+                    reg = <0>;
+                    remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint at 1 {
+                     reg = <1>;
+                     remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+
+            port at 1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint at 0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint at 1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+        };
+    };
-- 
2.7.4