[v7,1/7] dt-bindings: PCI: mediatek-gen3: Add YAML schema
Jianjun Wang
jianjun.wang at mediatek.com
Tue Jan 26 07:01:01 EST 2021
On Mon, 2021-01-25 at 14:22 -0600, Rob Herring wrote:
> On Wed, Jan 13, 2021 at 07:39:55PM +0800, Jianjun Wang wrote:
> > Add YAML schemas documentation for Gen3 PCIe controller on
> > MediaTek SoCs.
> >
> > Signed-off-by: Jianjun Wang <jianjun.wang at mediatek.com>
> > Acked-by: Ryder Lee <ryder.lee at mediatek.com>
> > ---
> > .../bindings/pci/mediatek-pcie-gen3.yaml | 172 ++++++++++++++++++
> > 1 file changed, 172 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> > new file mode 100644
> > index 000000000000..f133fb0184f1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> > @@ -0,0 +1,172 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Gen3 PCIe controller on MediaTek SoCs
> > +
> > +maintainers:
> > + - Jianjun Wang <jianjun.wang at mediatek.com>
> > +
> > +description: |+
> > + PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed
> > + and compatible with Gen2, Gen1 speed.
> > +
> > + This PCIe controller supports up to 256 MSI vectors, the MSI hardware
> > + block diagram is as follows:
> > +
> > + +-----+
> > + | GIC |
> > + +-----+
> > + ^
> > + |
> > + port->irq
> > + |
> > + +-+-+-+-+-+-+-+-+
> > + |0|1|2|3|4|5|6|7| (PCIe intc)
> > + +-+-+-+-+-+-+-+-+
> > + ^ ^ ^
> > + | | ... |
> > + +-------+ +------+ +-----------+
> > + | | |
> > + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+
> > + |0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets)
> > + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+
> > + ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
> > + | | | | | | | | | | | | (MSI vectors)
> > + | | | | | | | | | | | |
> > +
> > + (MSI SET0) (MSI SET1) ... (MSI SET7)
> > +
> > + With 256 MSI vectors supported, the MSI vectors are composed of 8 sets,
> > + each set has its own address for MSI message, and supports 32 MSI vectors
> > + to generate interrupt.
> > +
> > +allOf:
> > + - $ref: /schemas/pci/pci-bus.yaml#
> > +
> > +properties:
> > + compatible:
> > + const: mediatek,mt8192-pcie
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + ranges:
> > + minItems: 1
> > + maxItems: 8
> > +
> > + resets:
> > + minItems: 1
> > + maxItems: 2
>
> Why the range? The SoC either has the reset lines or it doesn't.
>
> > +
> > + reset-names:
> > + anyOf:
> > + - const: mac
> > + - const: phy
>
> I don't think this should stay, but if so, better expressed like this:
>
> minItems: 1
> maxItems: 2
> items:
> enum: [ mac, phy ]
Hi Rob,
Thanks for your review, does this means that I should merge the resets
and reset-names together as the following property?
resets:
minItems: 1
maxItems: 2
items:
enum: [ mac, phy ]
>
>
> > +
> > + clocks:
> > + maxItems: 6
> > +
> > + clock-names:
> > + items:
> > + - const: pl_250m
> > + - const: tl_26m
> > + - const: tl_96m
> > + - const: tl_32k
> > + - const: peri_26m
> > + - const: top_133m
> > +
> > + assigned-clocks:
> > + maxItems: 1
> > +
> > + assigned-clock-parents:
> > + maxItems: 1
> > +
> > + phys:
> > + maxItems: 1
> > +
> > + '#interrupt-cells':
> > + const: 1
> > +
> > + interrupt-controller:
> > + description: Interrupt controller node for handling legacy PCI interrupts.
> > + type: object
> > + properties:
> > + '#address-cells':
> > + const: 0
> > + '#interrupt-cells':
> > + const: 1
> > + interrupt-controller: true
> > +
> > + required:
> > + - '#address-cells'
> > + - '#interrupt-cells'
> > + - interrupt-controller
> > +
> > + additionalProperties: false
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - ranges
> > + - clocks
> > + - '#interrupt-cells'
> > + - interrupt-controller
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > + bus {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + pcie: pcie at 11230000 {
> > + compatible = "mediatek,mt8192-pcie";
> > + device_type = "pci";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + reg = <0x00 0x11230000 0x00 0x4000>;
> > + reg-names = "pcie-mac";
>
> Not documented. Drop.
I will add the property information for reg-names in the next version,
it's used by controller driver to get the register resource.
Thanks.
>
> > + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
> > + bus-range = <0x00 0xff>;
> > + ranges = <0x82000000 0x00 0x12000000 0x00
> > + 0x12000000 0x00 0x1000000>;
> > + clocks = <&infracfg 44>,
> > + <&infracfg 40>,
> > + <&infracfg 43>,
> > + <&infracfg 97>,
> > + <&infracfg 99>,
> > + <&infracfg 111>;
> > + clock-names = "pl_250m", "tl_26m", "tl_96m",
> > + "tl_32k", "peri_26m", "top_133m";
> > + assigned-clocks = <&topckgen 50>;
> > + assigned-clock-parents = <&topckgen 91>;
> > +
> > + phys = <&pciephy>;
> > + phy-names = "pcie-phy";
> > + resets = <&infracfg_rst 0>;
> > + reset-names = "phy";
> > +
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 0x7>;
> > + interrupt-map = <0 0 0 1 &pcie_intc 0>,
> > + <0 0 0 2 &pcie_intc 1>,
> > + <0 0 0 3 &pcie_intc 2>,
> > + <0 0 0 4 &pcie_intc 3>;
> > + pcie_intc: interrupt-controller {
> > + #address-cells = <0>;
> > + #interrupt-cells = <1>;
> > + interrupt-controller;
> > + };
> > + };
> > + };
> > --
> > 2.25.1
> >
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
More information about the linux-arm-kernel
mailing list