[PATCH] mmc: aspeed: move kunit test into separate module
Ulf Hansson
ulf.hansson at linaro.org
Tue Jan 26 04:57:42 EST 2021
On Mon, 25 Jan 2021 at 13:28, Arnd Bergmann <arnd at kernel.org> wrote:
>
> From: Arnd Bergmann <arnd at arndb.de>
>
> Having both the driver and the unit test in the same module
> leads to a link failure because of the extra init/exit functions:
>
> drivers/mmc/host/sdhci-of-aspeed-test.c:98:1: error: redefinition of '__inittest'
> kunit_test_suite(aspeed_sdhci_test_suite);
>
> Make it a separate module instead.
>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
Arnd, thanks for the patch and for your help! However, this time
Andrew already posted a similar patch [1] to fix the problem, which I
have just applied.
[1]
https://patchwork.kernel.org/project/linux-mmc/patch/20210122114852.3790565-1-andrew@aj.id.au/
Kind regards
Uffe
> ---
> drivers/mmc/host/Kconfig | 2 +-
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-of-aspeed-test.c | 5 +++++
> drivers/mmc/host/sdhci-of-aspeed.c | 11 ++++-------
> drivers/mmc/host/sdhci-of-aspeed.h | 10 ++++++++++
> 5 files changed, 21 insertions(+), 8 deletions(-)
> create mode 100644 drivers/mmc/host/sdhci-of-aspeed.h
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index d6f00d1d6251..a248f9f6be91 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -169,7 +169,7 @@ config MMC_SDHCI_OF_ASPEED
> If unsure, say N.
>
> config MMC_SDHCI_OF_ASPEED_TEST
> - bool "Tests for the ASPEED SDHCI driver"
> + tristate "Tests for the ASPEED SDHCI driver"
> depends on MMC_SDHCI_OF_ASPEED && KUNIT=y
> help
> Enable KUnit tests for the ASPEED SDHCI driver. Select this
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 451c25fc2c69..5cc7e5f13587 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -90,6 +90,7 @@ obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o
> obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o
> obj-$(CONFIG_MMC_SDHCI_OF_ARASAN) += sdhci-of-arasan.o
> obj-$(CONFIG_MMC_SDHCI_OF_ASPEED) += sdhci-of-aspeed.o
> +obj-$(CONFIG_MMC_SDHCI_OF_ASPEED_TEST) += sdhci-of-aspeed-test.o
> obj-$(CONFIG_MMC_SDHCI_OF_AT91) += sdhci-of-at91.o
> obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
> obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
> diff --git a/drivers/mmc/host/sdhci-of-aspeed-test.c b/drivers/mmc/host/sdhci-of-aspeed-test.c
> index 34070605b28b..e7e42991534a 100644
> --- a/drivers/mmc/host/sdhci-of-aspeed-test.c
> +++ b/drivers/mmc/host/sdhci-of-aspeed-test.c
> @@ -2,6 +2,7 @@
> /* Copyright (C) 2020 IBM Corp. */
>
> #include <kunit/test.h>
> +#include "sdhci-of-aspeed.h"
>
> static void aspeed_sdhci_phase_ddr52(struct kunit *test)
> {
> @@ -96,3 +97,7 @@ static struct kunit_suite aspeed_sdhci_test_suite = {
> .test_cases = aspeed_sdhci_test_cases,
> };
> kunit_test_suite(aspeed_sdhci_test_suite);
> +
> +MODULE_DESCRIPTION("Unit test for the ASPEED SD/SDIO/SDHCI Controllers");
> +MODULE_AUTHOR("Andrew Jeffery <andrew at aj.id.au>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
> index 3b0d381e1215..dcc80099f528 100644
> --- a/drivers/mmc/host/sdhci-of-aspeed.c
> +++ b/drivers/mmc/host/sdhci-of-aspeed.c
> @@ -15,6 +15,7 @@
> #include <linux/platform_device.h>
> #include <linux/spinlock.h>
>
> +#include "sdhci-of-aspeed.h"
> #include "sdhci-pltfm.h"
>
> #define ASPEED_SDC_INFO 0x00
> @@ -42,7 +43,6 @@ struct aspeed_sdc {
> struct aspeed_sdhci_tap_param {
> bool valid;
>
> -#define ASPEED_SDHCI_TAP_PARAM_INVERT_CLK BIT(4)
> u8 in;
> u8 out;
> };
> @@ -123,8 +123,8 @@ aspeed_sdc_set_phase_taps(struct aspeed_sdc *sdc,
> #define ASPEED_SDHCI_NR_TAPS 15
> /* Measured value with *handwave* environmentals and static loading */
> #define ASPEED_SDHCI_MAX_TAP_DELAY_PS 1253
> -static int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
> - int phase_deg)
> +int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
> + int phase_deg)
> {
> u64 phase_period_ps;
> u64 prop_delay_ps;
> @@ -158,6 +158,7 @@ static int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
>
> return inverted | tap;
> }
> +EXPORT_SYMBOL_GPL(aspeed_sdhci_phase_to_tap);
>
> static void
> aspeed_sdhci_phases_to_taps(struct device *dev, unsigned long rate,
> @@ -579,10 +580,6 @@ static void __exit aspeed_sdc_exit(void)
> }
> module_exit(aspeed_sdc_exit);
>
> -#if defined(CONFIG_MMC_SDHCI_OF_ASPEED_TEST)
> -#include "sdhci-of-aspeed-test.c"
> -#endif
> -
> MODULE_DESCRIPTION("Driver for the ASPEED SD/SDIO/SDHCI Controllers");
> MODULE_AUTHOR("Ryan Chen <ryan_chen at aspeedtech.com>");
> MODULE_AUTHOR("Andrew Jeffery <andrew at aj.id.au>");
> diff --git a/drivers/mmc/host/sdhci-of-aspeed.h b/drivers/mmc/host/sdhci-of-aspeed.h
> new file mode 100644
> index 000000000000..931e70781d08
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-of-aspeed.h
> @@ -0,0 +1,10 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +#ifndef _SDHCI_OF_ASPEED_H
> +#define _SDHCI_OF_ASPEED_H
> +
> +struct device;
> +int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
> + int phase_deg);
> +#define ASPEED_SDHCI_TAP_PARAM_INVERT_CLK BIT(4)
> +
> +#endif /* _SDHCI_OF_ASPEED_H */
> --
> 2.29.2
>
More information about the linux-arm-kernel
mailing list