[PATCH] Revert "arm64: dts: amlogic: add missing ethernet reset ID"

[Neil Armstrong]

It has been reported on IRC and in KernelCI boot tests, this change breaks
internal PHY support on the Amlogic G12A/SM1 Based boards.

We suspect the added signal to reset more than the Ethernet MAC but also
the MDIO/(RG)MII mux used to redirect the MAC signals to the internal PHY.

This reverts commit f3362f0c18174a1f334a419ab7d567a36bd1b3f3 while we find
and acceptable solution to cleanly reset the Ethernet MAC.

Reported-by: Corentin Labbe <clabbe at baylibre.com>
Acked-by: Jérôme Brunet <jbrunet at baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
Hi Kevin,

This has been reported to also break on 5.10, when this lands on 5.11, I'll send another
patch for 5.10 because meson-axg.dtsi needs a conflict resolution on 5.11.

Jerome gave me his ack off-list.

Neil


 arch/arm64/boot/dts/amlogic/meson-axg.dtsi        | 2 --
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 --
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi         | 3 ---
 3 files changed, 7 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index ba1c6dfdc4b6..d945c84ab697 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -280,8 +280,6 @@ ethmac: ethernet at ff3f0000 {
 				      "timing-adjustment";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
-			resets = <&reset RESET_ETHERNET>;
-			reset-names = "stmmaceth";
 			power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>;
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 9c90d562ada1..851eeb5e9de1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -224,8 +224,6 @@ ethmac: ethernet at ff3f0000 {
 				      "timing-adjustment";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
-			resets = <&reset RESET_ETHERNET>;
-			reset-names = "stmmaceth";
 			status = "disabled";
 
 			mdio0: mdio {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 726b91d3a905..0edd137151f8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -13,7 +13,6 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/meson-gxbb-power.h>
-#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -576,8 +575,6 @@ ethmac: ethernet at c9410000 {
 			interrupt-names = "macirq";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
-			resets = <&reset RESET_ETHERNET>;
-			reset-names = "stmmaceth";
 			power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
 			status = "disabled";
 		};
-- 
2.25.1