[PATCH v7 00/28] coresight: etm4x: Support for system instructions

[Suzuki K Poulose]

On 1/25/21 6:49 PM, Mathieu Poirier wrote:
> On Sun, Jan 10, 2021 at 10:48:22PM +0000, Suzuki K Poulose wrote:
>> CoreSight ETMv4.4 obsoletes memory mapped access to ETM and
>> mandates the system instructions for registers.
>> This also implies that they may not be on the amba bus.
>> Right now all the CoreSight components are accessed via memory
>> map. Also, we have some common routines in coresight generic
>> code driver (e.g, CS_LOCK, claim/disclaim), which assume the
>> mmio. In order to preserve the generic algorithms at a single
>> place and to allow dynamic switch for ETMs, this series introduces
>> an abstraction layer for accessing a coresight device. It is
>> designed such that the mmio access are fast tracked (i.e, without
>> an indirect function call).
>>
>> This will also help us to get rid of the driver+attribute specific
>> sysfs show/store routines and replace them with a single routine
>> to access a given register offset (which can be embedded in the
>> dev_ext_attribute). This is not currently implemented in the series,
>> but can be achieved.
>>
>> Further we switch the generic routines to work with the abstraction.
>> With this in place, we refactor the etm4x code a bit to allow for
>> supporting the system instructions with very little new code.
>>
>> We use TRCDEVARCH for the detection of the ETM component, which
>> is a standard register as per CoreSight architecture, rather than
>> the etm specific id register TRCIDR1. This is for making sure
>> that we are able to detect the ETM via system instructions accurately,
>> when the the trace unit could be anything (etm or a custom trace unit).
>> To keep the backward compatibility for any existing broken
>> impelementation which may not implement TRCDEVARCH, we fall back to TRCIDR1.
>> Also this covers us for the changes in the future architecture [0].
>>
>> Also, v8.4 self-hosted tracing extensions (coupled with ETMv4.4) adds
>> new filtering registers for trace by exception level. So on a v8.4
>> system, with Trace Filtering support, without the appropriate
>> programming of the Trace filter registers (TRFCR_ELx), tracing
>> will not be enabled. This series also includes the TraceFiltering
>> support to cover the ETM-v4.4 support.
>>
>> The series has been mildly tested on a model for system instructions.
>> I would really appreciate any testing on real hardware.
>>
>> Applies on coresight/next. A tree is available here [1].
> 
> I have applied this set.

Thanks Mathieu, appreciate it.

Cheers
Suzuki