[PATCH 0/5] Thermal zone configuration for Meson8/Meson8b/Meson8m2

[Kevin Hilman]

On Mon, 21 Dec 2020 19:13:01 +0100, Martin Blumenstingl wrote:
> This adds the thermal zone configuration on Meson8/Meson8b/Meson8m2
> SoCs. The thermal sensor reading is taken from SAR ADC. With
> "generic-adc-thermal" it is then used to configure the thermal zone.
> 
> CPU and GPU frequencies can both be managed. The vendor kernel also
> manages the number of active GPU pixel processor cores. This is not
> supported yet so we skip it.
> 
> [...]

Applied, thanks!

[1/5] ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi
      commit: e9ced25e41588a2ff95280b4d3dabf3a0865513b
[2/5] ARM: dts: meson: add the ADC thermal sensor to meson.dtsi
      commit: c8559511107120403f7810428f50fc68fd77ed5a
[3/5] ARM: dts: meson8: add the thermal-zones with cooling configuration
      commit: ecdb744b1f819949f783508331ff6ff8a6a45730
[4/5] ARM: dts: meson8b: add the thermal-zones with cooling configuration
      commit: 9073f694efd8733b0e7c97d3396d81161bd05582
[5/5] ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
      commit: 726731566a862fa375de44313f601e49c4d40377

Best regards,
-- 
Kevin Hilman <khilman at baylibre.com>