[PATCH v3 2/5] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64

[Nishanth Menon]

On 14:25-20210120, Dave Gerlach wrote:
> Add pinctrl macros for AM64 SoC. These macro definitions are similar to
> that of previous platforms, but adding new definitions to avoid any
> naming confusions in the soc dts files.
> 
> Unlike what checkpatch insists, we do not need parentheses enclosing
> the values for this macro as we do intend it to generate two separate
> values as has been done for other similar platforms.
> 
> Signed-off-by: Dave Gerlach <d-gerlach at ti.com>

I need Rob's ack to apply this patch.

> ---
>  include/dt-bindings/pinctrl/k3.h | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h
> index b0eea7cc6e23..e085f102b283 100644
> --- a/include/dt-bindings/pinctrl/k3.h
> +++ b/include/dt-bindings/pinctrl/k3.h
> @@ -3,7 +3,7 @@
>   * This header provides constants for pinctrl bindings for TI's K3 SoC
>   * family.
>   *
> - * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
> + * Copyright (C) 2018-2021 Texas Instruments Incorporated - https://www.ti.com/
>   */
>  #ifndef _DT_BINDINGS_PINCTRL_TI_K3_H
>  #define _DT_BINDINGS_PINCTRL_TI_K3_H
> @@ -35,4 +35,7 @@
>  #define J721E_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
>  #define J721E_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
>  
> +#define AM64X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
> +#define AM64X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
> +
>  #endif
> -- 
> 2.28.0
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D