[PATCH v8 2/4] KEYS: trusted: Introduce TEE based Trusted Keys

Fri Jan 22 13:12:10 EST 2021

On Thu, Jan 21, 2021 at 05:23:45PM +0100, Jerome Forissier wrote:
> 
> 
> On 1/21/21 4:24 PM, Jarkko Sakkinen wrote:
> > On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote:
> >> On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote:
> >>>
> >>>
> >>> On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote:
> >>>> On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote:
> >>>>> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko at kernel.org> wrote:
> >>>>>>
> >>>>>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote:
> >>>>>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote:
> >>>>>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko at kernel.org> wrote:
> >>>>>>>>>
> >>>>>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote:
> >>>>>>>>>> Hi Jarkko,
> >>>>>>>>>>
> >>>>>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko at kernel.org> wrote:
> >>>>>>>>>>>
> >>>>>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote:
> >>>>>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality
> >>>>>>>>>>>> to seal and unseal trusted keys using hardware unique key.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg at linaro.org>
> >>>>>>>>>>>
> >>>>>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces
> >>>>>>>>>>> just a blank screen:
> >>>>>>>>>>>
> >>>>>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio
> >>>>>>>>>>>
> >>>>>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here:
> >>>>>>>>>>>
> >>>>>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/
> >>>>>>>>>>>
> >>>>>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will
> >>>>>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then
> >>>>>>>>>>> in the master branch.
> >>>>>>>>>>>
> >>>>>>>>>>> To create identical images you just need to
> >>>>>>>>>>>
> >>>>>>>>>>> $ make tpmdd_defconfig && make
> >>>>>>>>>>>
> >>>>>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this
> >>>>>>>>>>> patch set, and in bigger picture I really need to have ready to run
> >>>>>>>>>>> aarch64 environment available.
> >>>>>>>>>>
> >>>>>>>>>> I would rather suggest you to follow steps listed here [1] as to test
> >>>>>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A,
> >>>>>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build
> >>>>>>>>>> system [2]. And then it would be easier to migrate them to your
> >>>>>>>>>> buildroot environment as well.
> >>>>>>>>>>
> >>>>>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html
> >>>>>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8
> >>>>>>>>>>
> >>>>>>>>>> -Sumit
> >>>>>>>>>
> >>>>>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow.
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>> $ cat keyctl_change
> >>>>>>>> diff --git a/common.mk b/common.mk
> >>>>>>>> index aeb7b41..663e528 100644
> >>>>>>>> --- a/common.mk
> >>>>>>>> +++ b/common.mk
> >>>>>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR)
> >>>>>>>>  BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH)
> >>>>>>>>  BR2_PACKAGE_STRACE ?= y
> >>>>>>>>  BR2_TARGET_GENERIC_GETTY_PORT ?= $(if
> >>>>>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0)
> >>>>>>>> +BR2_PACKAGE_KEYUTILS := y
> >>>>>>>>
> >>>>>>>>  # All BR2_* variables from the makefile or the environment are appended to
> >>>>>>>>  # ../out-br/extra.conf. All values are quoted "..." except y and n.
> >>>>>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf
> >>>>>>>> index 368c18a..832ab74 100644
> >>>>>>>> --- a/kconfigs/qemu.conf
> >>>>>>>> +++ b/kconfigs/qemu.conf
> >>>>>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y
> >>>>>>>>  CONFIG_9P_FS_POSIX_ACL=y
> >>>>>>>>  CONFIG_HW_RANDOM=y
> >>>>>>>>  CONFIG_HW_RANDOM_VIRTIO=y
> >>>>>>>> +CONFIG_TRUSTED_KEYS=y
> >>>>>>>> +CONFIG_ENCRYPTED_KEYS=y
> >>>>>>>>
> >>>>>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more
> >>>>>>>>> version and CC the documentation patch to Elaine and Mini, and clearly
> >>>>>>>>> remark in the commit message that TEE is a standard, with a link to the
> >>>>>>>>> specification.
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>> Sure, I will roll out the next version after your testing.
> >>>>>>>
> >>>>>>> Thanks, I'll try this at instant, and give my feedback.
> >>>>>>
> >>>>>> I bump into this:
> >>>>>>
> >>>>>> $ make run-only
> >>>>>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/
> >>>>>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory
> >>>>>> make: *** [Makefile:194: run-only] Error 1
> >>>>>>
> >>>>>
> >>>>> Could you check if the following directory tree is built after
> >>>>> executing the below command?
> >>>>>
> >>>>> $ make -j`nproc`
> >>>>> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c
> >>>>>
> >>>>> $ tree out/bin/
> >>>>> out/bin/
> >>>>> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin
> >>>>> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin
> >>>>> ├── bl31.bin ->
> >>>>> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin
> >>>>> ├── bl32.bin ->
> >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin
> >>>>> ├── bl32_extra1.bin ->
> >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin
> >>>>> ├── bl32_extra2.bin ->
> >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin
> >>>>> ├── bl33.bin ->
> >>>>> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd
> >>>>> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image
> >>>>> └── rootfs.cpio.gz ->
> >>>>> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz
> >>>>>
> >>>>> 0 directories, 9 files
> >>>>>
> >>>>> -Sumit
> >>>>
> >>>> I actually spotted a build error that was unnoticed last time:
> >>>>
> >>>> make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests'
> >>>> /bin/sh: 1: python: not found
> >>>>
> >>>> I'd prefer not to install Python2. It has been EOL over a year.
> >>>
> >>> AFAIK, everything should build fine with Python3. On my Ubuntu 20.04
> >>> machine, this is accomplished by installing package "python-is-python3"
> >>> (after uninstalling "python-is-python2" if need be).
> >>>
> >>> $ ls -l /usr/bin/python
> >>> lrwxrwxrwx 1 root root 7 Apr 15  2020 /usr/bin/python -> python3
> >>
> >> Right, just found about this in unrelated context :-) [*]
> >>
> >> Hope this will work out...
> >>
> >> [*] https://github.com/surge-synthesizer/surge/pull/3655
> > 
> > Now I get
> > 
> > Traceback (most recent call last):
> >   File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module>
> >     allTests = GetAllTestsSuite()
> >   File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite
> >     return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()])
> >   File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite
> >     import CToolsTests
> >   File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module>
> >     import TianoCompress
> >   File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module>
> >     TheTestSuite = TestTools.MakeTheTestSuite(locals())
> >   File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite
> >     for name, item in localItems.iteritems():
> > AttributeError: 'dict' object has no attribute 'iteritems'
> 
> Right. Same here after removing all traces of Python2 from my system :-/
> 
> A couple of fixes are needed:
> 1. EDK2 needs to be upgraded to tag or later [1]
> 2. The PYTHON3_ENABLE environment variable needs to be set to TRUE [2]
> 
> [1] https://github.com/OP-TEE/manifest/pull/177
> [2] https://github.com/OP-TEE/build/pull/450

BTW, Is to *really* impossible to test this with plain BuildRoot.  It's
obvious that this forks BR internally.

I mean even if I get this working once, this will feels like a clumsy way
to test Aarch64 regularly. I use BuildRoot extensively for x86 testing. And
it would be nice to be able to start doing regular ARM testing.

The mainline BuildRoot does have bunch of BR2_PACKAGE_OPTEE_* included.
Are they all broken?

Here's a reference where I got with that endeavour:

https://lore.kernel.org/linux-integrity/X%2Fx+N0fgrzIZTeNi@kernel.org/

/Jarkko