[PATCH V2 2/4] dt-bindings: mmc: fsl-imx-esdhc: add clock bindings

[Peng Fan]

Hi Rob,

> Subject: Re: [PATCH V2 2/4] dt-bindings: mmc: fsl-imx-esdhc: add clock
> bindings
> 
> On Thu, 21 Jan 2021 11:09:51 +0800, peng.fan at nxp.com wrote:
> > From: Peng Fan <peng.fan at nxp.com>
> >
> > Add clock bindings for fsl-imx-esdhc yaml
> >
> > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > ---
> >  .../devicetree/bindings/mmc/fsl-imx-esdhc.yaml        | 11
> +++++++++++
> >  1 file changed, 11 insertions(+)
> >
> 
> My bot found errors running 'make dt_binding_check' on your patch:

Patch 3/4 addresses the dts, actually I think it is the dts not use correct
clock order.

Thanks,
Peng.

> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock
> /imx8qxp-lpcg.example.dt.yaml: mmc at 5b010000: clock-names:1: 'ahb' was
> expected
> 	From schema:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mmc
> /fsl-imx-esdhc.yaml
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock
> /imx8qxp-lpcg.example.dt.yaml: mmc at 5b010000: clock-names:2: 'per' was
> expected
> 	From schema:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mmc
> /fsl-imx-esdhc.yaml
> 
> See
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatch
> work.ozlabs.org%2Fpatch%2F1429619&data=04%7C01%7Cpeng.fan%40
> nxp.com%7Cc543c002a0b54348d48408d8be25ec0b%7C686ea1d3bc2b4c6fa
> 92cd99c5c301635%7C0%7C0%7C637468417375412086%7CUnknown%7CT
> WFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLC
> JXVCI6Mn0%3D%7C1000&sdata=cISWAn3kYIoqvxr39Mu5NL6rwkebmk
> VN1drRi%2BDNwAs%3D&reserved=0
> 
> This check can fail if there are any dependencies. The base for a patch series
> is generally the most recent rc1.
> 
> If you already ran 'make dt_binding_check' and didn't see the above error(s),
> then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit.