[Patch v2 2/3] arm64: dtsi: ls1028a: Update flexcan properties

[Kuldeep Singh]

LS1028A supports two flexcan controllers similar to LX2160A.

There's already a compatible entry defined i.e "fsl,lx2160ar1-flexcan"
which can be further reused for LS1028A.
Please note, "fsl,ls1028ar1-flexcan" compatible entry doesn't exists and
can be safely removed.

LS1028A has a single peripheral clock (i.e platform clock) source
connected to both "ipg" and "per" and therefore, remove "sysclk" as
clock source from device-tree.

Signed-off-by: Kuldeep Singh <kuldeep.singh at nxp.com>
---
Hi Shawn,
I would like to mention the motivation behind compatible string change.
There's no ls1028a compatible entry i.e " fsl,ls1028ar1-flexcan" in flexcan
driver. See below.
https://elixir.bootlin.com/linux/latest/source/drivers/net/can/flexcan.c#L1913

And the documentation says that ls1028a entry should be followed by lx2160a.
https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml#L42

Since ls1028a entry is not present, anyway lx2160a entry will be eventually used.
Please let me know your views.

 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index e00acad..d28bd52 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -408,21 +408,25 @@
 		};
 
 		can0: can at 2180000 {
-			compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+			compatible = "fsl,lx2160ar1-flexcan";
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysclk>, <&clockgen QORIQ_CLK_PLATFORM_PLL
-						       QORIQ_CLK_PLL_DIV(2)>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg", "per";
 			status = "disabled";
 		};
 
 		can1: can at 2190000 {
-			compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+			compatible = "fsl,lx2160ar1-flexcan";
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysclk>, <&clockgen QORIQ_CLK_PLATFORM_PLL
-						       QORIQ_CLK_PLL_DIV(2)>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg", "per";
 			status = "disabled";
 		};
-- 
2.7.4