[PATCH v3 12/15] soc: xilinx: vcu: use bitfields for register definition
Michael Tretter
m.tretter at pengutronix.de
Thu Jan 21 02:16:56 EST 2021
This makes the register accesses more readable and is closer to what is
usually used in the kernel.
Signed-off-by: Michael Tretter <m.tretter at pengutronix.de>
Reviewed-by: Stephen Boyd <sboyd at kernel.org>
Acked-by: Michal Simek <michal.simek at xilinx.com>
---
Changelog:
v3: none
v2: none
---
drivers/soc/xilinx/xlnx_vcu.c | 115 ++++++++++------------------------
1 file changed, 34 insertions(+), 81 deletions(-)
diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/soc/xilinx/xlnx_vcu.c
index f858c269e779..f27a5111b9d0 100644
--- a/drivers/soc/xilinx/xlnx_vcu.c
+++ b/drivers/soc/xilinx/xlnx_vcu.c
@@ -6,6 +6,7 @@
*
* Contacts Dhaval Shah <dshah at xilinx.com>
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/device.h>
@@ -20,41 +21,26 @@
#include <dt-bindings/clock/xlnx-vcu.h>
-/* vcu slcr registers, bitmask and shift */
#define VCU_PLL_CTRL 0x24
-#define VCU_PLL_CTRL_RESET_MASK 0x01
-#define VCU_PLL_CTRL_RESET_SHIFT 0
-#define VCU_PLL_CTRL_BYPASS_MASK 0x01
-#define VCU_PLL_CTRL_BYPASS_SHIFT 3
-#define VCU_PLL_CTRL_FBDIV_MASK 0x7f
-#define VCU_PLL_CTRL_FBDIV_SHIFT 8
-#define VCU_PLL_CTRL_POR_IN_MASK 0x01
-#define VCU_PLL_CTRL_POR_IN_SHIFT 1
-#define VCU_PLL_CTRL_PWR_POR_MASK 0x01
-#define VCU_PLL_CTRL_PWR_POR_SHIFT 2
-#define VCU_PLL_CTRL_CLKOUTDIV_MASK 0x03
-#define VCU_PLL_CTRL_CLKOUTDIV_SHIFT 16
-#define VCU_PLL_CTRL_DEFAULT 0
-#define VCU_PLL_DIV2 2
+#define VCU_PLL_CTRL_RESET BIT(0)
+#define VCU_PLL_CTRL_POR_IN BIT(1)
+#define VCU_PLL_CTRL_PWR_POR BIT(2)
+#define VCU_PLL_CTRL_BYPASS BIT(3)
+#define VCU_PLL_CTRL_FBDIV GENMASK(14, 8)
+#define VCU_PLL_CTRL_CLKOUTDIV GENMASK(18, 16)
#define VCU_PLL_CFG 0x28
-#define VCU_PLL_CFG_RES_MASK 0x0f
-#define VCU_PLL_CFG_RES_SHIFT 0
-#define VCU_PLL_CFG_CP_MASK 0x0f
-#define VCU_PLL_CFG_CP_SHIFT 5
-#define VCU_PLL_CFG_LFHF_MASK 0x03
-#define VCU_PLL_CFG_LFHF_SHIFT 10
-#define VCU_PLL_CFG_LOCK_CNT_MASK 0x03ff
-#define VCU_PLL_CFG_LOCK_CNT_SHIFT 13
-#define VCU_PLL_CFG_LOCK_DLY_MASK 0x7f
-#define VCU_PLL_CFG_LOCK_DLY_SHIFT 25
+#define VCU_PLL_CFG_RES GENMASK(3, 0)
+#define VCU_PLL_CFG_CP GENMASK(8, 5)
+#define VCU_PLL_CFG_LFHF GENMASK(12, 10)
+#define VCU_PLL_CFG_LOCK_CNT GENMASK(22, 13)
+#define VCU_PLL_CFG_LOCK_DLY GENMASK(31, 25)
#define VCU_ENC_CORE_CTRL 0x30
#define VCU_ENC_MCU_CTRL 0x34
#define VCU_DEC_CORE_CTRL 0x38
#define VCU_DEC_MCU_CTRL 0x3c
-
#define VCU_PLL_STATUS 0x60
-#define VCU_PLL_STATUS_LOCK_STATUS_MASK 0x01
+#define VCU_PLL_STATUS_LOCK_STATUS BIT(0)
#define MHZ 1000000
#define FVCO_MIN (1500U * MHZ)
@@ -237,25 +223,6 @@ static inline void xvcu_write(void __iomem *iomem, u32 offset, u32 value)
iowrite32(value, iomem + offset);
}
-/**
- * xvcu_write_field_reg - Write to the vcu reg field
- * @iomem: vcu reg space base address
- * @offset: vcu reg offset from base
- * @field: vcu reg field to write to
- * @mask: vcu reg mask
- * @shift: vcu reg number of bits to shift the bitfield
- */
-static void xvcu_write_field_reg(void __iomem *iomem, int offset,
- u32 field, u32 mask, int shift)
-{
- u32 val = xvcu_read(iomem, offset);
-
- val &= ~(mask << shift);
- val |= (field & mask) << shift;
-
- xvcu_write(iomem, offset, val);
-}
-
#define to_vcu_pll(_hw) container_of(_hw, struct vcu_pll, hw)
struct vcu_pll {
@@ -274,7 +241,7 @@ static int xvcu_pll_wait_for_lock(struct vcu_pll *pll)
timeout = jiffies + msecs_to_jiffies(2000);
do {
lock_status = xvcu_read(base, VCU_PLL_STATUS);
- if (lock_status & VCU_PLL_STATUS_LOCK_STATUS_MASK)
+ if (lock_status & VCU_PLL_STATUS_LOCK_STATUS)
return 0;
} while (!time_after(jiffies, timeout));
@@ -294,8 +261,7 @@ static struct clk_hw *xvcu_register_pll_post(struct device *dev,
* timing in the design.
*/
vcu_pll_ctrl = xvcu_read(reg_base, VCU_PLL_CTRL);
- div = vcu_pll_ctrl >> VCU_PLL_CTRL_CLKOUTDIV_SHIFT;
- div = div & VCU_PLL_CTRL_CLKOUTDIV_MASK;
+ div = FIELD_GET(VCU_PLL_CTRL_CLKOUTDIV, vcu_pll_ctrl);
if (div != 1)
return ERR_PTR(-EINVAL);
@@ -328,16 +294,15 @@ static int xvcu_pll_set_div(struct vcu_pll *pll, int div)
return -EINVAL;
vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
- vcu_pll_ctrl &= ~(VCU_PLL_CTRL_FBDIV_MASK << VCU_PLL_CTRL_FBDIV_SHIFT);
- vcu_pll_ctrl |= (cfg->fbdiv & VCU_PLL_CTRL_FBDIV_MASK) <<
- VCU_PLL_CTRL_FBDIV_SHIFT;
+ vcu_pll_ctrl &= ~VCU_PLL_CTRL_FBDIV;
+ vcu_pll_ctrl |= FIELD_PREP(VCU_PLL_CTRL_FBDIV, cfg->fbdiv);
xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
- cfg_val = (cfg->res << VCU_PLL_CFG_RES_SHIFT) |
- (cfg->cp << VCU_PLL_CFG_CP_SHIFT) |
- (cfg->lfhf << VCU_PLL_CFG_LFHF_SHIFT) |
- (cfg->lock_cnt << VCU_PLL_CFG_LOCK_CNT_SHIFT) |
- (cfg->lock_dly << VCU_PLL_CFG_LOCK_DLY_SHIFT);
+ cfg_val = FIELD_PREP(VCU_PLL_CFG_RES, cfg->res) |
+ FIELD_PREP(VCU_PLL_CFG_CP, cfg->cp) |
+ FIELD_PREP(VCU_PLL_CFG_LFHF, cfg->lfhf) |
+ FIELD_PREP(VCU_PLL_CFG_LOCK_CNT, cfg->lock_cnt) |
+ FIELD_PREP(VCU_PLL_CFG_LOCK_DLY, cfg->lock_dly);
xvcu_write(base, VCU_PLL_CFG, cfg_val);
return 0;
@@ -366,7 +331,7 @@ static unsigned long xvcu_pll_recalc_rate(struct clk_hw *hw,
u32 vcu_pll_ctrl;
vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
- div = (vcu_pll_ctrl >> VCU_PLL_CTRL_FBDIV_SHIFT) & VCU_PLL_CTRL_FBDIV_MASK;
+ div = FIELD_GET(VCU_PLL_CTRL_FBDIV, vcu_pll_ctrl);
return div * parent_rate;
}
@@ -386,23 +351,14 @@ static int xvcu_pll_enable(struct clk_hw *hw)
u32 vcu_pll_ctrl;
int ret;
- xvcu_write_field_reg(base, VCU_PLL_CTRL,
- 1, VCU_PLL_CTRL_BYPASS_MASK,
- VCU_PLL_CTRL_BYPASS_SHIFT);
-
vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
- vcu_pll_ctrl &= ~(VCU_PLL_CTRL_POR_IN_MASK <<
- VCU_PLL_CTRL_POR_IN_SHIFT);
- vcu_pll_ctrl |= (VCU_PLL_CTRL_DEFAULT & VCU_PLL_CTRL_POR_IN_MASK) <<
- VCU_PLL_CTRL_POR_IN_SHIFT;
- vcu_pll_ctrl &= ~(VCU_PLL_CTRL_PWR_POR_MASK <<
- VCU_PLL_CTRL_PWR_POR_SHIFT);
- vcu_pll_ctrl |= (VCU_PLL_CTRL_DEFAULT & VCU_PLL_CTRL_PWR_POR_MASK) <<
- VCU_PLL_CTRL_PWR_POR_SHIFT;
+ vcu_pll_ctrl |= VCU_PLL_CTRL_BYPASS;
xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
- vcu_pll_ctrl &= ~(VCU_PLL_CTRL_RESET_MASK << VCU_PLL_CTRL_RESET_SHIFT);
- vcu_pll_ctrl |= (0 & VCU_PLL_CTRL_RESET_MASK) << VCU_PLL_CTRL_RESET_SHIFT;
+ vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
+ vcu_pll_ctrl &= ~VCU_PLL_CTRL_POR_IN;
+ vcu_pll_ctrl &= ~VCU_PLL_CTRL_PWR_POR;
+ vcu_pll_ctrl &= ~VCU_PLL_CTRL_RESET;
xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
ret = xvcu_pll_wait_for_lock(pll);
@@ -411,9 +367,9 @@ static int xvcu_pll_enable(struct clk_hw *hw)
goto err;
}
- xvcu_write_field_reg(base, VCU_PLL_CTRL,
- 0, VCU_PLL_CTRL_BYPASS_MASK,
- VCU_PLL_CTRL_BYPASS_SHIFT);
+ vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
+ vcu_pll_ctrl &= ~VCU_PLL_CTRL_BYPASS;
+ xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
err:
return ret;
@@ -426,12 +382,9 @@ static void xvcu_pll_disable(struct clk_hw *hw)
u32 vcu_pll_ctrl;
vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
- vcu_pll_ctrl &= ~(VCU_PLL_CTRL_POR_IN_MASK << VCU_PLL_CTRL_POR_IN_SHIFT);
- vcu_pll_ctrl |= (1 & VCU_PLL_CTRL_POR_IN_MASK) << VCU_PLL_CTRL_POR_IN_SHIFT;
- vcu_pll_ctrl &= ~(VCU_PLL_CTRL_PWR_POR_MASK << VCU_PLL_CTRL_PWR_POR_SHIFT);
- vcu_pll_ctrl |= (1 & VCU_PLL_CTRL_PWR_POR_MASK) << VCU_PLL_CTRL_PWR_POR_SHIFT;
- vcu_pll_ctrl &= ~(VCU_PLL_CTRL_RESET_MASK << VCU_PLL_CTRL_RESET_SHIFT);
- vcu_pll_ctrl |= (1 & VCU_PLL_CTRL_RESET_MASK) << VCU_PLL_CTRL_RESET_SHIFT;
+ vcu_pll_ctrl |= VCU_PLL_CTRL_POR_IN;
+ vcu_pll_ctrl |= VCU_PLL_CTRL_PWR_POR;
+ vcu_pll_ctrl |= VCU_PLL_CTRL_RESET;
xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
}
--
2.20.1
More information about the linux-arm-kernel
mailing list