[PATCH v3 0/5] arm64: Initial support for Texas Instruments AM642 Platform

[Dave Gerlach]

This is v3 of the series to add initial support for the latest new SoC,
AM642, from Texas Instruments. Additional detail can be found in the
patch descriptions, also see AM64X Technical Reference Manual (SPRUIM2,
Nov 2020) for further details: https://www.ti.com/lit/pdf/spruim2

This version contains a few minor fixes from v2:

* Use the appropriate 'arm,cortex-a53-pmu' instead of 'arm,armv8-pmuv3'
  for ARM pmu node based on Sudeep's comment from v2.
* Fix a typo in the 'dmas' property on main_spi0
* Drop main_spi0 from board dts as a more appropriate
  compatible to use for the eeprom will be available after [1] is merged.
* Add 'gpio-line-names' under main_i2c1.


v2: https://lore.kernel.org/linux-arm-kernel/20210119163927.774-1-d-gerlach@ti.com/
v1: https://lore.kernel.org/linux-arm-kernel/20201125052004.17823-1-d-gerlach@ti.com/

Regards,
Dave

[1] https://lore.kernel.org/patchwork/project/lkml/list/?series=478815

Dave Gerlach (4):
  dt-bindings: arm: ti: Add bindings for AM642 SoC
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
  arm64: dts: ti: Add support for AM642 SoC
  arm64: dts: ti: Add support for AM642 EVM

Peter Ujfalusi (1):
  arm64: dts: ti: k3-am64-main: Enable DMA support

 .../devicetree/bindings/arm/ti/k3.yaml        |   6 +
 arch/arm64/boot/dts/ti/Makefile               |   2 +
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      | 406 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi       |  76 ++++
 arch/arm64/boot/dts/ti/k3-am64.dtsi           | 103 +++++
 arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 246 +++++++++++
 arch/arm64/boot/dts/ti/k3-am642.dtsi          |  65 +++
 include/dt-bindings/pinctrl/k3.h              |   5 +-
 8 files changed, 908 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi

-- 
2.28.0