[PATCH v2 15/22] dt-bindings: media: camss: Add qcom, sdm660-camss binding
Robert Foss
robert.foss at linaro.org
Wed Jan 20 08:43:50 EST 2021
Add bindings for qcom,sdm660-camss in order to support the camera
subsystem on SDM630/660 and SDA variants.
Signed-off-by: Robert Foss <robert.foss at linaro.org>
---
Changes since v1:
- Laurent: Reworked driver to use dtschema
.../bindings/media/qcom,sdm660-camss.yaml | 416 ++++++++++++++++++
1 file changed, 416 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
new file mode 100644
index 000000000000..105ce84f9b71
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -0,0 +1,416 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+ - Robert Foss <robert.foss at linaro.org>
+ - Todor Tomov <todor.too at gmail.com>
+
+description: |
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+ compatible:
+ const: qcom,sdm660-camss
+
+ clocks:
+ description:
+ Input clocks for the hardware block.
+ minItems: 42
+ maxItems: 42
+
+ clock-names:
+ description:
+ Names of input clocks for the hardware block.
+ items:
+ - const: ahb
+ - const: cphy_csid0
+ - const: cphy_csid1
+ - const: cphy_csid2
+ - const: cphy_csid3
+ - const: csi0_ahb
+ - const: csi0
+ - const: csi0_phy
+ - const: csi0_pix
+ - const: csi0_rdi
+ - const: csi1_ahb
+ - const: csi1
+ - const: csi1_phy
+ - const: csi1_pix
+ - const: csi1_rdi
+ - const: csi2_ahb
+ - const: csi2
+ - const: csi2_phy
+ - const: csi2_pix
+ - const: csi2_rdi
+ - const: csi3_ahb
+ - const: csi3
+ - const: csi3_phy
+ - const: csi3_pix
+ - const: csi3_rdi
+ - const: csiphy0_timer
+ - const: csiphy1_timer
+ - const: csiphy2_timer
+ - const: csiphy_ahb2crif
+ - const: csi_vfe0
+ - const: csi_vfe1
+ - const: ispif_ahb
+ - const: throttle_axi
+ - const: top_ahb
+ - const: vfe0_ahb
+ - const: vfe0
+ - const: vfe0_stream
+ - const: vfe1_ahb
+ - const: vfe1
+ - const: vfe1_stream
+ - const: vfe_ahb
+ - const: vfe_axi
+
+ interrupts:
+ description:
+ IRQs for the hardware block.
+ minItems: 10
+ maxItems: 10
+
+ interrupt-names:
+ description:
+ Names of IRQs for the hardware block.
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csid3
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: ispif
+ - const: vfe0
+ - const: vfe1
+
+ iommus:
+ maxItems: 4
+
+ power-domains:
+ maxItems: 2
+
+ ports:
+ description:
+ The CSI data input ports.
+
+ type: object
+
+ properties:
+ port at 0:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port at 1:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port at 2:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port at 3:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ reg:
+ minItems: 14
+ maxItems: 14
+
+ reg-names:
+ items:
+ - const: csi_clk_mux
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csid3
+ - const: csiphy0
+ - const: csiphy0_clk_mux
+ - const: csiphy1
+ - const: csiphy1_clk_mux
+ - const: csiphy2
+ - const: csiphy2_clk_mux
+ - const: ispif
+ - const: vfe0
+ - const: vfe1
+
+ vdda-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interrupt-names
+ - interrupts
+ - iommus
+ - power-domains
+ - reg
+ - reg-names
+ - vdda-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm660.h>
+ #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+
+ camss: camss at ca00000 {
+ compatible = "qcom,sdm660-camss";
+
+ clocks = <&mmcc CAMSS_AHB_CLK>,
+ <&mmcc CAMSS_CPHY_CSID0_CLK>,
+ <&mmcc CAMSS_CPHY_CSID1_CLK>,
+ <&mmcc CAMSS_CPHY_CSID2_CLK>,
+ <&mmcc CAMSS_CPHY_CSID3_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CPHY_CSID0_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CPHY_CSID1_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CPHY_CSID2_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CPHY_CSID3_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+ <&mmcc CSIPHY_AHB2CRIF_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc THROTTLE_CAMSS_AXI_CLK>,
+ <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_CLK>,
+ <&mmcc CAMSS_VFE0_STREAM_CLK>,
+ <&mmcc CAMSS_VFE1_AHB_CLK>,
+ <&mmcc CAMSS_VFE1_CLK>,
+ <&mmcc CAMSS_VFE1_STREAM_CLK>,
+ <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
+ <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
+
+ clock-names = "ahb",
+ "cphy_csid0",
+ "cphy_csid1",
+ "cphy_csid2",
+ "cphy_csid3",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csiphy_ahb2crif",
+ "csi_vfe0",
+ "csi_vfe1",
+ "ispif_ahb",
+ "throttle_axi",
+ "top_ahb",
+ "vfe0_ahb",
+ "vfe0",
+ "vfe0_stream",
+ "vfe1_ahb",
+ "vfe1",
+ "vfe1_stream",
+ "vfe_ahb",
+ "vfe_axi";
+
+ interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "ispif",
+ "vfe0",
+ "vfe1";
+
+ iommus = <&mmss_smmu 0xc00>,
+ <&mmss_smmu 0xc01>,
+ <&mmss_smmu 0xc02>,
+ <&mmss_smmu 0xc03>;
+
+ power-domains = <&mmcc CAMSS_VFE0_GDSC>,
+ <&mmcc CAMSS_VFE1_GDSC>;
+
+ reg = <0x0ca00020 0x10>,
+ <0x0ca30000 0x100>,
+ <0x0ca30400 0x100>,
+ <0x0ca30800 0x100>,
+ <0x0ca30c00 0x100>,
+ <0x0c824000 0x1000>,
+ <0x0ca00120 0x4>,
+ <0x0c825000 0x1000>,
+ <0x0ca00124 0x4>,
+ <0x0c826000 0x1000>,
+ <0x0ca00128 0x4>,
+ <0x0ca31000 0x500>,
+ <0x0ca10000 0x1000>,
+ <0x0ca14000 0x1000>;
+
+ reg-names = "csi_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "ispif",
+ "vfe0",
+ "vfe1";
+
+ vdda-supply = <®_2v8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
--
2.27.0
More information about the linux-arm-kernel
mailing list