[PATCH v3 2/3] reset: mchp: sparx5: add switch reset driver

[Alexandre Belloni]

Hi,

This commit is also missing a commit message and you could probably get
some info from your cover letter here.

On 14/01/2021 17:24:31+0100, Steen Hegelund wrote:
> Signed-off-by: Steen Hegelund <steen.hegelund at microchip.com>
> ---
>  drivers/reset/Kconfig                  |   8 ++
>  drivers/reset/Makefile                 |   1 +
>  drivers/reset/reset-microchip-sparx5.c | 120 +++++++++++++++++++++++++
>  3 files changed, 129 insertions(+)
>  create mode 100644 drivers/reset/reset-microchip-sparx5.c
> 
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 71ab75a46491..05c240c47a8a 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -101,6 +101,14 @@ config RESET_LPC18XX
>  	help
>  	  This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
>  
> +config RESET_MCHP_SPARX5
> +	bool "Microchip Sparx5 reset driver"
> +	depends on HAS_IOMEM || COMPILE_TEST
> +	default y if SPARX5_SWITCH
> +	select MFD_SYSCON
> +	help
> +	  This driver supports switch core reset for the Microchip Sparx5 SoC.
> +
>  config RESET_MESON
>  	tristate "Meson Reset Driver"
>  	depends on ARCH_MESON || COMPILE_TEST
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 1054123fd187..341fd9ab4bf6 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
>  obj-$(CONFIG_RESET_INTEL_GW) += reset-intel-gw.o
>  obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o
>  obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
> +obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o
>  obj-$(CONFIG_RESET_MESON) += reset-meson.o
>  obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o
>  obj-$(CONFIG_RESET_NPCM) += reset-npcm.o
> diff --git a/drivers/reset/reset-microchip-sparx5.c b/drivers/reset/reset-microchip-sparx5.c
> new file mode 100644
> index 000000000000..0dbd2b6161ef
> --- /dev/null
> +++ b/drivers/reset/reset-microchip-sparx5.c
> @@ -0,0 +1,120 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/* Microchip Sparx5 Switch Reset driver
> + *
> + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
> + *
> + * The Sparx5 Chip Register Model can be browsed at this location:
> + * https://github.com/microchip-ung/sparx-5_reginfo
> + */
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_device.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/reset-controller.h>
> +
> +#define PROTECT_REG    0x84
> +#define PROTECT_BIT    BIT(10)
> +#define SOFT_RESET_REG 0x08
> +#define SOFT_RESET_BIT BIT(1)
> +
> +struct mchp_reset_context {
> +	struct regmap *cpu_ctrl;
> +	struct regmap *gcb_ctrl;
> +	struct reset_controller_dev rcdev;
> +};
> +
> +static int sparx5_switch_reset(struct reset_controller_dev *rcdev,
> +			       unsigned long id)
> +{
> +	struct mchp_reset_context *ctx =
> +		container_of(rcdev, struct mchp_reset_context, rcdev);
> +	u32 val;
> +

I would ensure the reset only happens once here else I'm not sure how
you could do it from the individual drivers.

> +	/* Make sure the core is PROTECTED from reset */
> +	regmap_update_bits(ctx->cpu_ctrl, PROTECT_REG, PROTECT_BIT, PROTECT_BIT);
> +
> +	/* Start soft reset */
> +	regmap_write(ctx->gcb_ctrl, SOFT_RESET_REG, SOFT_RESET_BIT);
> +
> +	/* Wait for soft reset done */
> +	return regmap_read_poll_timeout(ctx->gcb_ctrl, SOFT_RESET_REG, val,
> +					(val & SOFT_RESET_BIT) == 0,
> +					1, 100);
> +}
> +

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com