[PATCH net-next 2/2] drivers: net: dsa: mt7530: MT7530 optional GPIO support

[Linus Walleij]

On Mon, Jan 11, 2021 at 6:46 AM DENG Qingfang <dqfext at gmail.com> wrote:

> MT7530's LED controller can drive up to 15 LED/GPIOs.
>
> Add support for GPIO control and allow users to use its GPIOs by
> setting gpio-controller property in device tree.
>
> Signed-off-by: DENG Qingfang <dqfext at gmail.com>

Double-check the initial output conditions as indicated by
Russell, if you really want to be thorough, use an oscilloscope
but check the specs at least.

> +static u32
> +mt7530_gpio_to_bit(unsigned int offset)
> +{
> +       return BIT(offset + offset / 3);
> +}

So for offset 0..14 this becomes bits
0, 1, 2, 4, 5, 6, 8, 9, 10, 12  ... 18

What is the logic in this and is it what you intend?
Please add a comment explaining what the offset is supposed
to become for offsets 0..14 and why.

> +       gc->ngpio = 15;

And it really IS 15 not 16? Not that I know network equipment
very well...

Yours,
Linus Walleij