[PATCH 2/3] arm64: dts: imx: Add i.mx8mm nitrogen8mm basic dts support
Shawn Guo
shawnguo at kernel.org
Sun Jan 17 19:52:39 EST 2021
On Mon, Jan 11, 2021 at 12:24:06AM +0100, Adrien Grassein wrote:
> Tested with a basic Build Root configuration booting from sdcard.
>
> Signed-off-by: Adrien Grassein <adrien.grassein at gmail.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../dts/freescale/imx8mm-nitrogen8mm_rev2.dts | 657 ++++++++++++++++++
> 2 files changed, 658 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-nitrogen8mm_rev2.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 901d80086b47..b2eb7a5e4db3 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen8mm_rev2.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen8mm_rev2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen8mm_rev2.dts
> new file mode 100644
> index 000000000000..e942bd175cb5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen8mm_rev2.dts
> @@ -0,0 +1,657 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree file for Boundary Devices i.MX8MMini Nitrogen8MM Rev2 board.
> + * Adrien Grassein <adrien.grassein at gmail.com.com>
> + */
> +/dts-v1/;
> +#include "imx8mm.dtsi"
> +
> +#define MX8MMN(a, b) MX8MM_##a b
> +#define IMX8MMN(a) IMX8MM_##a
I do not like these macros which is no help on anything, IMO.
> +
> +&iomuxc {
Let's be consistent to all other i.MX device trees that start with root
node and have labeling node afterward.
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + pinctrl_sai1: sai1grp {
> + fsl,pins = <
> + /* wm8960 */
> + MX8MMN(IOMUXC_SAI1_MCLK_SAI1_MCLK, 0xd6)
> + MX8MMN(IOMUXC_SAI1_TXFS_SAI1_TX_SYNC, 0xd6)
> + MX8MMN(IOMUXC_SAI1_TXC_SAI1_TX_BCLK, 0xd6)
> + MX8MMN(IOMUXC_SAI1_TXD0_SAI1_TX_DATA0, 0xd6)
> + MX8MMN(IOMUXC_SAI1_RXD0_SAI1_RX_DATA0, 0xd6)
> + >;
> + };
> +
> + pinctrl_fec1: fec1grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_ENET_MDC_ENET1_MDC, 0x3)
> + MX8MMN(IOMUXC_ENET_MDIO_ENET1_MDIO, 0x3)
> + MX8MMN(IOMUXC_ENET_TD3_ENET1_RGMII_TD3, 0x1f)
> + MX8MMN(IOMUXC_ENET_TD2_ENET1_RGMII_TD2, 0x1f)
> + MX8MMN(IOMUXC_ENET_TD1_ENET1_RGMII_TD1, 0x1f)
> + MX8MMN(IOMUXC_ENET_TD0_ENET1_RGMII_TD0, 0x1f)
> + MX8MMN(IOMUXC_ENET_RD3_ENET1_RGMII_RD3, 0x91)
> + MX8MMN(IOMUXC_ENET_RD2_ENET1_RGMII_RD2, 0x91)
> + MX8MMN(IOMUXC_ENET_RD1_ENET1_RGMII_RD1, 0x91)
> + MX8MMN(IOMUXC_ENET_RD0_ENET1_RGMII_RD0, 0x91)
> + MX8MMN(IOMUXC_ENET_TXC_ENET1_RGMII_TXC, 0x1f)
> + MX8MMN(IOMUXC_ENET_RXC_ENET1_RGMII_RXC, 0x91)
> + MX8MMN(IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL, 0x91)
> + MX8MMN(IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL, 0x1f)
> +#define GPIRQ_FEC1_PHY <&gpio3 16 IRQ_TYPE_LEVEL_LOW>
No. The extra indirection makes device tree harder to read.
> + MX8MMN(IOMUXC_NAND_READY_B_GPIO3_IO16, 0x159)
> + >;
> + };
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_GPIO1_IO03_GPIO1_IO3, 0x09)
> + MX8MMN(IOMUXC_GPIO1_IO08_GPIO1_IO8, 0x09)
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_I2C1_SCL_I2C1_SCL, 0x400001c3)
> + MX8MMN(IOMUXC_I2C1_SDA_I2C1_SDA, 0x400001c3)
> + >;
> + };
> +
> + pinctrl_i2c1_1: i2c1_1grp {
> + fsl,pins = <
> +#define GP_I2C1_SCL <&gpio5 14 GPIO_OPEN_DRAIN>
> + MX8MMN(IOMUXC_I2C1_SCL_GPIO5_IO14, 0x400001c3)
> +#define GP_I2C1_SDA <&gpio5 15 GPIO_OPEN_DRAIN>
> + MX8MMN(IOMUXC_I2C1_SDA_GPIO5_IO15, 0x400001c3)
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_I2C2_SCL_I2C2_SCL, 0x400001c3)
> + MX8MMN(IOMUXC_I2C2_SDA_I2C2_SDA, 0x400001c3)
> + >;
> + };
> +
> + pinctrl_i2c2_1: i2c2_1grp {
> + fsl,pins = <
> +#define GP_I2C2_SCL <&gpio5 16 GPIO_OPEN_DRAIN>
> + MX8MMN(IOMUXC_I2C2_SCL_GPIO5_IO16, 0x400001c3)
> +#define GP_I2C2_SDA <&gpio5 17 GPIO_OPEN_DRAIN>
> + MX8MMN(IOMUXC_I2C2_SDA_GPIO5_IO17, 0x400001c3)
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_I2C3_SCL_I2C3_SCL, 0x400001c3)
> + MX8MMN(IOMUXC_I2C3_SDA_I2C3_SDA, 0x400001c3)
> + >;
> + };
> +
> + pinctrl_i2c3_1: i2c3_1grp {
> + fsl,pins = <
> +#define GP_I2C3_SCL <&gpio5 18 GPIO_OPEN_DRAIN>
> + MX8MMN(IOMUXC_I2C3_SCL_GPIO5_IO18, 0x400001c3)
> +#define GP_I2C3_SDA <&gpio5 19 GPIO_OPEN_DRAIN>
> + MX8MMN(IOMUXC_I2C3_SDA_GPIO5_IO19, 0x400001c3)
> + >;
> + };
> +
> + pinctrl_i2c3a_rv4162: i2c3a-rv4162grp {
> + fsl,pins = <
> +#define GPIRQ_RV4162 <&gpio4 22 IRQ_TYPE_LEVEL_LOW>
> + MX8MMN(IOMUXC_SAI2_RXC_GPIO4_IO22, 0x1c0)
> + >;
> + };
> +
> + pinctrl_i2c4: i2c4grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_I2C4_SCL_I2C4_SCL, 0x400001c3)
> + MX8MMN(IOMUXC_I2C4_SDA_I2C4_SDA, 0x400001c3)
> + >;
> + };
> +
> + pinctrl_i2c4_1: i2c4_1grp {
> + fsl,pins = <
> +#define GP_I2C4_SCL <&gpio5 20 GPIO_OPEN_DRAIN>
> + MX8MMN(IOMUXC_I2C4_SCL_GPIO5_IO20, 0x400001c3)
> +#define GP_I2C4_SDA <&gpio5 21 GPIO_OPEN_DRAIN>
> + MX8MMN(IOMUXC_I2C4_SDA_GPIO5_IO21, 0x400001c3)
> + >;
> + };
> +
> + pinctrl_reg_usdhc2_vqmmc: reg_usdhc2_vqmmcgrp {
> + fsl,pins = <
> +#define GP_USDHC2_VSEL <&gpio3 2 GPIO_ACTIVE_HIGH>
> + MX8MMN(IOMUXC_NAND_CE1_B_GPIO3_IO2, 0x16)
> + >;
> + };
> +
> + pinctrl_reg_wlan_vmmc: reg-wlan-vmmcgrp {
> + fsl,pins = <
> +#define GP_REG_WLAN_VMMC <&gpio3 20 GPIO_ACTIVE_HIGH>
> + MX8MMN(IOMUXC_SAI5_RXC_GPIO3_IO20, 0x16)
> + >;
> + };
> +
> + pinctrl_sound_wm8960: sound-wm8960grp {
> + fsl,pins = <
> +#define GP_WM8960_MIC_DET <&gpio1 10 GPIO_ACTIVE_HIGH>
> + MX8MMN(IOMUXC_GPIO1_IO10_GPIO1_IO10, 0x80)
> +#define GP_WM8960_HP_DET <&gpio4 28 GPIO_ACTIVE_HIGH>
> + MX8MMN(IOMUXC_SAI3_RXFS_GPIO4_IO28, 0x80)
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_UART1_RXD_UART1_DCE_RX, 0x140)
> + MX8MMN(IOMUXC_UART1_TXD_UART1_DCE_TX, 0x140)
> + MX8MMN(IOMUXC_UART3_RXD_UART1_DCE_CTS_B, 0x140)
> + MX8MMN(IOMUXC_UART3_TXD_UART1_DCE_RTS_B, 0x140)
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_UART2_RXD_UART2_DCE_RX, 0x140)
> + MX8MMN(IOMUXC_UART2_TXD_UART2_DCE_TX, 0x140)
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_ECSPI1_SCLK_UART3_DCE_RX, 0x140)
> + MX8MMN(IOMUXC_ECSPI1_MOSI_UART3_DCE_TX, 0x140)
> + MX8MMN(IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B, 0x140)
> + MX8MMN(IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B, 0x140)
> + >;
> + };
> +
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_UART4_RXD_UART4_DCE_RX, 0x140)
> + MX8MMN(IOMUXC_UART4_TXD_UART4_DCE_TX, 0x140)
> + >;
> + };
> +
> + pinctrl_usbotg1: usbotg1grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_GPIO1_IO12_USB1_OTG_PWR, 0x16)
> + MX8MMN(IOMUXC_GPIO1_IO13_USB1_OTG_OC, 0x156)
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_SD1_CLK_USDHC1_CLK, 0x190)
> + MX8MMN(IOMUXC_SD1_CMD_USDHC1_CMD, 0x1d0)
> + MX8MMN(IOMUXC_SD1_DATA0_USDHC1_DATA0, 0x1d0)
> + MX8MMN(IOMUXC_SD1_DATA1_USDHC1_DATA1, 0x1d0)
> + MX8MMN(IOMUXC_SD1_DATA2_USDHC1_DATA2, 0x1d0)
> + MX8MMN(IOMUXC_SD1_DATA3_USDHC1_DATA3, 0x1d0)
> + MX8MMN(IOMUXC_SD1_DATA4_USDHC1_DATA4, 0x1d0)
> + MX8MMN(IOMUXC_SD1_DATA5_USDHC1_DATA5, 0x1d0)
> + MX8MMN(IOMUXC_SD1_DATA6_USDHC1_DATA6, 0x1d0)
> + MX8MMN(IOMUXC_SD1_DATA7_USDHC1_DATA7, 0x1d0)
> +#define GP_EMMC_RESET <&gpio2 10 GPIO_ACTIVE_LOW>
> + MX8MMN(IOMUXC_SD1_RESET_B_GPIO2_IO10, 0x141)
> + >;
> + };
> +
> + pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
> + fsl,pins = <
> + MX8MMN(IOMUXC_SD1_CLK_USDHC1_CLK, 0x194)
> + MX8MMN(IOMUXC_SD1_CMD_USDHC1_CMD, 0x1d4)
> + MX8MMN(IOMUXC_SD1_DATA0_USDHC1_DATA0, 0x1d4)
> + MX8MMN(IOMUXC_SD1_DATA1_USDHC1_DATA1, 0x1d4)
> + MX8MMN(IOMUXC_SD1_DATA2_USDHC1_DATA2, 0x1d4)
> + MX8MMN(IOMUXC_SD1_DATA3_USDHC1_DATA3, 0x1d4)
> + MX8MMN(IOMUXC_SD1_DATA4_USDHC1_DATA4, 0x1d4)
> + MX8MMN(IOMUXC_SD1_DATA5_USDHC1_DATA5, 0x1d4)
> + MX8MMN(IOMUXC_SD1_DATA6_USDHC1_DATA6, 0x1d4)
> + MX8MMN(IOMUXC_SD1_DATA7_USDHC1_DATA7, 0x1d4)
> + >;
> + };
> +
> + pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
> + fsl,pins = <
> + MX8MMN(IOMUXC_SD1_CLK_USDHC1_CLK, 0x196)
> + MX8MMN(IOMUXC_SD1_CMD_USDHC1_CMD, 0x1d6)
> + MX8MMN(IOMUXC_SD1_DATA0_USDHC1_DATA0, 0x1d6)
> + MX8MMN(IOMUXC_SD1_DATA1_USDHC1_DATA1, 0x1d6)
> + MX8MMN(IOMUXC_SD1_DATA2_USDHC1_DATA2, 0x1d6)
> + MX8MMN(IOMUXC_SD1_DATA3_USDHC1_DATA3, 0x1d6)
> + MX8MMN(IOMUXC_SD1_DATA4_USDHC1_DATA4, 0x1d6)
> + MX8MMN(IOMUXC_SD1_DATA5_USDHC1_DATA5, 0x1d6)
> + MX8MMN(IOMUXC_SD1_DATA6_USDHC1_DATA6, 0x1d6)
> + MX8MMN(IOMUXC_SD1_DATA7_USDHC1_DATA7, 0x1d6)
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_SD2_CLK_USDHC2_CLK, 0x190)
> + MX8MMN(IOMUXC_SD2_CMD_USDHC2_CMD, 0x1d0)
> + MX8MMN(IOMUXC_SD2_DATA0_USDHC2_DATA0, 0x1d0)
> + MX8MMN(IOMUXC_SD2_DATA1_USDHC2_DATA1, 0x1d0)
> + MX8MMN(IOMUXC_SD2_DATA2_USDHC2_DATA2, 0x1d0)
> + MX8MMN(IOMUXC_SD2_DATA3_USDHC2_DATA3, 0x1d0)
> +#define GP_USDHC2_CD <&gpio2 12 GPIO_ACTIVE_LOW>
> + MX8MMN(IOMUXC_SD2_CD_B_GPIO2_IO12, 0x1c4)
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> + fsl,pins = <
> + MX8MMN(IOMUXC_SD2_CLK_USDHC2_CLK, 0x194)
> + MX8MMN(IOMUXC_SD2_CMD_USDHC2_CMD, 0x1d4)
> + MX8MMN(IOMUXC_SD2_DATA0_USDHC2_DATA0, 0x1d4)
> + MX8MMN(IOMUXC_SD2_DATA1_USDHC2_DATA1, 0x1d4)
> + MX8MMN(IOMUXC_SD2_DATA2_USDHC2_DATA2, 0x1d4)
> + MX8MMN(IOMUXC_SD2_DATA3_USDHC2_DATA3, 0x1d4)
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
> + fsl,pins = <
> + MX8MMN(IOMUXC_SD2_CLK_USDHC2_CLK, 0x196)
> + MX8MMN(IOMUXC_SD2_CMD_USDHC2_CMD, 0x1d6)
> + MX8MMN(IOMUXC_SD2_DATA0_USDHC2_DATA0, 0x1d6)
> + MX8MMN(IOMUXC_SD2_DATA1_USDHC2_DATA1, 0x1d6)
> + MX8MMN(IOMUXC_SD2_DATA2_USDHC2_DATA2, 0x1d6)
> + MX8MMN(IOMUXC_SD2_DATA3_USDHC2_DATA3, 0x1d6)
> + >;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_NAND_WE_B_USDHC3_CLK, 0x190)
> + MX8MMN(IOMUXC_NAND_WP_B_USDHC3_CMD, 0x1d0)
> + MX8MMN(IOMUXC_NAND_DATA04_USDHC3_DATA0, 0x1d0)
> + MX8MMN(IOMUXC_NAND_DATA05_USDHC3_DATA1, 0x1d0)
> + MX8MMN(IOMUXC_NAND_DATA06_USDHC3_DATA2, 0x1d0)
> + MX8MMN(IOMUXC_NAND_DATA07_USDHC3_DATA3, 0x1d0)
> + /* Bluetooth slow clock */
> + MX8MMN(IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K, 0x03)
> + >;
> + };
> +
> + pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
> + fsl,pins = <
> + MX8MMN(IOMUXC_NAND_WE_B_USDHC3_CLK, 0x194)
> + MX8MMN(IOMUXC_NAND_WP_B_USDHC3_CMD, 0x1d4)
> + MX8MMN(IOMUXC_NAND_DATA04_USDHC3_DATA0, 0x1d4)
> + MX8MMN(IOMUXC_NAND_DATA05_USDHC3_DATA1, 0x1d4)
> + MX8MMN(IOMUXC_NAND_DATA06_USDHC3_DATA2, 0x1d4)
> + MX8MMN(IOMUXC_NAND_DATA07_USDHC3_DATA3, 0x1d4)
> + >;
> + };
> +
> + pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
> + fsl,pins = <
> + MX8MMN(IOMUXC_NAND_WE_B_USDHC3_CLK, 0x196)
> + MX8MMN(IOMUXC_NAND_WP_B_USDHC3_CMD, 0x1d6)
> + MX8MMN(IOMUXC_NAND_DATA04_USDHC3_DATA0, 0x1d6)
> + MX8MMN(IOMUXC_NAND_DATA05_USDHC3_DATA1, 0x1d6)
> + MX8MMN(IOMUXC_NAND_DATA06_USDHC3_DATA2, 0x1d6)
> + MX8MMN(IOMUXC_NAND_DATA07_USDHC3_DATA3, 0x1d6)
> + >;
> + };
> +
> + pinctrl_wdog: wdoggrp {
> + fsl,pins = <
> + MX8MMN(IOMUXC_GPIO1_IO02_WDOG1_WDOG_B, 0x140)
> + >;
> + };
> +
> +};
> +
> +
> +&i2c1 {
> + clock-frequency = <400000>;
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + pinctrl-1 = <&pinctrl_i2c1_1>;
> + scl-gpios = GP_I2C1_SCL;
> + sda-gpios = GP_I2C1_SDA;
> + status = "okay";
> +
> + pmic: pf8100 at 8 {
pf8100: pmic at 8
> + compatible = "nxp,pf8121a";
> + reg = <0x08>;
> + status = "okay";
We use okay status to flip disabled device, and it's unnecessary here.
> +
> + regulators {
> + reg_ldo1: ldo1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <5000000>;
> + regulator-min-microvolt = <1500000>;
> + };
> +
> + reg_ldo2: ldo2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <5000000>;
> + regulator-min-microvolt = <1500000>;
> + };
> +
> + reg_ldo3: ldo3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <5000000>;
> + regulator-min-microvolt = <1500000>;
> + };
> +
> + reg_ldo4: ldo4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <5000000>;
> + regulator-min-microvolt = <1500000>;
> + };
> +
> + reg_sw1: buck1 {
> + nxp,phase = <0>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <1800000>;
> + regulator-min-microvolt = <400000>;
> + regulator-max-microamp = <4500000>;
> + };
> +
> + reg_sw2: buck2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <1800000>;
> + regulator-min-microvolt = <400000>;
> + };
> +
> + reg_sw3: buck3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <1800000>;
> + regulator-min-microvolt = <400000>;
> + };
> +
> + reg_sw4: buck4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <1800000>;
> + regulator-min-microvolt = <400000>;
> + };
> +
> + reg_sw5: buck5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <1800000>;
> + regulator-min-microvolt = <400000>;
> + };
> +
> + reg_sw6: buck6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <1800000>;
> + regulator-min-microvolt = <400000>;
> + };
> +
> + reg_sw7: buck7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <4100000>;
> + regulator-min-microvolt = <1000000>;
> + };
> +
> + reg_vsnvs: vsnvs {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <1800000>;
> + };
> + };
> + };
> +};
> +
> +/ {
> + model = "Boundary Devices i.MX8MMini Nitrogen8MM Rev2";
> + compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm";
> +
> + reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
> + compatible = "regulator-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_usdhc2_vqmmc>;
> + regulator-name = "reg_sd2_vsel";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-type = "voltage";
> + regulator-boot-on;
> + regulator-always-on;
Why it's boot-on and always-on?
> + gpios = GP_USDHC2_VSEL;
> + states = <1800000 0x1
> + 3300000 0x0>;
> + };
> +
> + reg_vref_1v8: regulator-vref-1v8 {
> + compatible = "regulator-fixed";
> + regulator-name = "vref-1v8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + reg_vref_2v5: regulator-vref-2v5 {
> + compatible = "regulator-fixed";
> + regulator-name = "vref-2v5";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <2500000>;
> + };
> +
> + reg_vref_3v3: regulator-vref-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vref-3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + reg_vref_5v: regulator-vref-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "vref-5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +
> + reg_wlan_vmmc: regulator-wlan-vmmc {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_wlan_vmmc>;
> + regulator-name = "reg_wlan_vmmc";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = GP_REG_WLAN_VMMC;
> + startup-delay-us = <70000>;
> + enable-active-high;
> + };
> +
> + clocks {
Drop the container node.
> + clk16m: clk16m {
clock-16m for node name.
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <16000000>;
> + };
> + };
> +
> + sound-wm8960 {
> + compatible = "fsl,imx-audio-wm8960";
> + model = "wm8960-audio";
> + audio-cpu = <&sai1>;
> + codec-master;
> + audio-codec = <&wm8960>;
> + audio-routing =
> + "Headphone Jack", "HP_L",
> + "Headphone Jack", "HP_R",
> + "Ext Spk", "SPK_LP",
> + "Ext Spk", "SPK_LN",
> + "Ext Spk", "SPK_RP",
> + "Ext Spk", "SPK_RN",
> + "RINPUT1", "Mic Jack",
> + "Mic Jack", "MICB";
> + /* JD2: hp detect high for headphone*/
> + hp-det = <2 0>;
> + hp-det-gpios = GP_WM8960_HP_DET;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sound_wm8960>;
> + };
> +};
> +
> +&A53_0 {
> + cpu-supply = <®_sw3>;
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec1>;
> +
Unnecessary newline.
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy0>;
> + fsl,magic-packet;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
Have a newline between properties and child node.
> + ethphy0: ethernet-phy at 4 {
> + compatible = "ethernet-phy-id004D.D072", "ethernet-phy-ieee802.3-c22";
> + reg = <4>;
> + interrupts-extended = GPIRQ_FEC1_PHY;
> + };
> + };
> +};
> +
> +&i2c3 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + pinctrl-1 = <&pinctrl_i2c3_1>;
> + scl-gpios = GP_I2C3_SCL;
> + sda-gpios = GP_I2C3_SDA;
> + status = "okay";
> +
> + i2cmux at 70 {
> + compatible = "nxp,pca9540";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c3a: i2c3 at 0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + rtc at 68 {
Bad indentation.
> + compatible = "microcrystal,rv4162";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3a_rv4162>;
> + reg = <0x68>;
> + interrupts-extended = GPIRQ_RV4162;
> + wakeup-source;
> + };
> + };
> + };
> +};
> +
> +&i2c4 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&pinctrl_i2c4>;
> + pinctrl-1 = <&pinctrl_i2c4_1>;
> + scl-gpios = GP_I2C4_SCL;
> + sda-gpios = GP_I2C4_SDA;
> + status = "okay";
> +
> + wm8960: codec at 1a {
> + compatible = "wlf,wm8960";
> + reg = <0x1a>;
> + clocks = <&clk IMX8MMN(CLK_SAI1_ROOT)>;
> + clock-names = "mclk";
> + wlf,shared-lrclk;
> + };
> +};
> +
> +&sai1 {
> + assigned-clocks =
> + <&clk IMX8MMN(AUDIO_PLL1)>,
> + <&clk IMX8MMN(AUDIO_PLL2)>,
> + <&clk IMX8MMN(CLK_SAI1)>;
> + assigned-clock-parents = <0>, <0>, <&clk IMX8MMN(AUDIO_PLL1_OUT)>;
> + assigned-clock-rates = <786432000>, <722534400>, <12288000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai1>;
> + status = "okay";
> +};
> +
> +&uart1 { /* BT */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + assigned-clocks = <&clk IMX8MMN(CLK_UART1)>;
> + assigned-clock-parents = <&clk IMX8MMN(SYS_PLL1_80M)>;
> + fsl,uart-has-rtscts;
uart-has-rtscts
> + status = "okay";
> +};
> +
> +&uart2 { /* console */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + assigned-clocks = <&clk IMX8MMN(CLK_UART2)>;
> + assigned-clock-parents = <&clk IMX8MMN(CLK_24M)>;
> + status = "okay";
> +};
> +
> +/*eMMC*/
> +&usdhc1 {
> + bus-width = <8>;
> + sdhci-caps-mask = <0x80000000 0x0>;
> + non-removable;
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> + status = "okay";
redundant.
> + vmmc-supply = <®_vref_3v3>;
> + vqmmc-1-8-v;
> + vqmmc-supply = <®_vref_1v8>;
> + status = "okay";
> +};
> +
> +/*sdcard*/
> +&usdhc2 {
> + bus-width = <4>;
> + cd-gpios = GP_USDHC2_CD;
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
> + status = "okay";
Let's end properties list with `status`.
Shawn
> + vqmmc-supply = <®_ldo2>;
> +};
> +
> +/*wlan*/
> +&usdhc3 {
> + bus-width = <4>;
> + no-sd-uhs-sdr104;
> + non-removable;
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> + status = "okay";
> + vmmc-supply = <®_wlan_vmmc>;
> + vqmmc-1-8-v;
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> + status = "okay";
> +};
> --
> 2.25.1
>
More information about the linux-arm-kernel
mailing list