[PATCH v3] clk: sunxi-ng: h6: Fix clock divider range on some clocks
Andre Przywara
andre.przywara at arm.com
Sun Jan 17 19:09:12 EST 2021
While comparing clocks between the H6 and H616, some of the M factor
ranges were found to be wrong: the manual says they are only covering
two bits [1:0], but our code had "5" in the number-of-bits field.
By writing 0xff into that register in U-Boot and via FEL, it could be
confirmed that bits [4:2] are indeed masked off, so the manual is right.
Change to number of bits in the affected clock's description.
Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
Splitting this off from the H616 series, since there is no dependency
to it.
drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index a26dbbdff80d..bff446b78290 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -237,7 +237,7 @@ static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
psi_ahb1_ahb2_parents,
0x510,
- 0, 5, /* M */
+ 0, 2, /* M */
8, 2, /* P */
24, 2, /* mux */
0);
@@ -246,19 +246,19 @@ static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
"psi-ahb1-ahb2",
"pll-periph0" };
static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
- 0, 5, /* M */
+ 0, 2, /* M */
8, 2, /* P */
24, 2, /* mux */
0);
static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
- 0, 5, /* M */
+ 0, 2, /* M */
8, 2, /* P */
24, 2, /* mux */
0);
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
- 0, 5, /* M */
+ 0, 2, /* M */
8, 2, /* P */
24, 2, /* mux */
0);
--
2.17.5
More information about the linux-arm-kernel
mailing list