dmaengine : xilinx_dma two issues
Paul Thomas
pthomas8589 at gmail.com
Fri Jan 15 14:30:21 EST 2021
On Fri, Jan 8, 2021 at 2:13 AM Radhey Shyam Pandey <radheys at xilinx.com> wrote:
>
> > -----Original Message-----
> > From: Radhey Shyam Pandey
> > Sent: Monday, January 4, 2021 10:50 AM
> > To: Paul Thomas <pthomas8589 at gmail.com>; Dan Williams
> > <dan.j.williams at intel.com>; Vinod Koul <vkoul at kernel.org>; Michal Simek
> > <michals at xilinx.com>; Matthew Murrian <matthew.murrian at goctsi.com>;
> > Romain Perier <romain.perier at gmail.com>; Krzysztof Kozlowski
> > <krzk at kernel.org>; Marc Ferland <ferlandm at amotus.ca>; Sebastian von Ohr
> > <vonohr at smaract.com>; dmaengine at vger.kernel.org; Linux ARM <linux-
> > arm-kernel at lists.infradead.org>; linux-kernel <linux-
> > kernel at vger.kernel.org>; Shravya Kumbham <shravyak at xilinx.com>; git
> > <git at xilinx.com>
> > Subject: RE: dmaengine : xilinx_dma two issues
> >
> > > -----Original Message-----
> > > From: Paul Thomas <pthomas8589 at gmail.com>
> > > Sent: Monday, December 28, 2020 10:14 AM
> > > To: Dan Williams <dan.j.williams at intel.com>; Vinod Koul
> > > <vkoul at kernel.org>; Michal Simek <michals at xilinx.com>; Radhey Shyam
> > > Pandey <radheys at xilinx.com>; Matthew Murrian
> > > <matthew.murrian at goctsi.com>; Romain Perier
> > <romain.perier at gmail.com>;
> > > Krzysztof Kozlowski <krzk at kernel.org>; Marc Ferland
> > > <ferlandm at amotus.ca>; Sebastian von Ohr <vonohr at smaract.com>;
> > > dmaengine at vger.kernel.org; Linux ARM <linux-
> > > arm-kernel at lists.infradead.org>; linux-kernel <linux-
> > > kernel at vger.kernel.org>
> > > Subject: dmaengine : xilinx_dma two issues
> > >
> > > Hello,
> > >
> > > I'm trying to get the 5.10 kernel up and running for our system, and
> > > I'm running into a couple of issues with xilinx_dma.
> > + (Xilinx mailing list)
> >
> > Thanks for bringing the issues to our notice. Replies inline.
> >
> > >
> > > First, commit 14ccf0aab46e 'dmaengine: xilinx_dma: In dma channel
> > > probe fix node order dependency' breaks our usage. Before this commit a
> > call to:
> > > dma_request_chan(&indio_dev->dev, "axi_dma_0"); returns fine, but
> > > after that commit it returns -19. The reason for this seems to be that
> > > the only channel that is setup is channel 1 (chan->id is 1 in
> > xilinx_dma_chan_probe()).
> > > However in
> > > of_dma_xilinx_xlate() chan_id is gets set to 0 (int chan_id =
> > > dma_spec-
> > > >args[0];), which causes the:
> > > !xdev->chan[chan_id]
> > > test to fail in of_dma_xilinx_xlate()
> >
> > What is the channel number passed in
> > dmaclient DT?
>
> Any update on this issue?
>
> >
> > dmas = <& axi_dma_0 1>
> > dma-names = "axi_dma_0"
> >
> > >
> > > Our device-tree entry looks like this:
> > > axi_dma_0: dma at 80002000 {
> > > status = "okay";
> > > #dma-cells = <1>;
> > > compatible = "xlnx,axi-dma-1.00.a";
> > > interrupt-parent = <&gic>;
> > > interrupts = <0 89 4>;
> > > reg = <0x0 0x80002000 0x0 0x1000>;
> > > xlnx,addrwidth = <0x20>;
> > > clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk LPD_LSBUS>,
> > > <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk LPD_LSBUS>;
> > > clock-names = "s_axi_lite_aclk", "m_axi_sg_aclk",
> > > "m_axi_mm2s_aclk", "m_axi_s2mm_aclk";
> > > dma-channel at 80002030 {
> > > compatible = "xlnx,axi-dma-s2mm-channel";
> > > dma-channels = <0x1>;
> > > interrupts = <0 89 4>;
> > > xlnx,datawidth = <0x20>;
> > > xlnx,device-id = <0x0>;
> > > };
> > > };
> > >
> > > This is on a 5.10.1 kernel on arm64 zynqmp hardware.
> > >
> > > The second issue goes a little further back to commit e81274cd6b526
> > > 'dmaengine: add support to dynamic register/unregister of channels'.
> > > After this commit even just removing the module 'rmmod xilinx_dma',
> > > without ever using it, results in a kernel oops like this:
> > > [ 37.214568] xilinx-vdma 80002000.dma: ch 0: SG disabled
> > > [ 37.219807] xilinx-vdma 80002000.dma: WARN: Device release is not
> > > defined so it is not safe to unbind this driver while in use
> > > [ 37.231299] xilinx-vdma 80002000.dma: Xilinx AXI DMA Engine Driver
> > > Probed!!
> > > [ 42.100660] Unable to handle kernel paging request at virtual
> > > address dead000000000108
> > > [ 42.108598] Mem abort info:
> > > [ 42.111393] ESR = 0x96000044
> > > [ 42.114443] EC = 0x25: DABT (current EL), IL = 32 bits
> > > [ 42.119744] SET = 0, FnV = 0
> > > [ 42.122794] EA = 0, S1PTW = 0
> > > [ 42.125918] Data abort info:
> > > [ 42.128789] ISV = 0, ISS = 0x00000044
> > > [ 42.132617] CM = 0, WnR = 1
> > > [ 42.135577] [dead000000000108] address between user and kernel
> > > address ranges
> > > [ 42.142705] Internal error: Oops: 96000044 [#1] SMP
> > > [ 42.147566] Modules linked in: xilinx_dma(-) clk_xlnx_clock_wizard
> > > uio_pdrv_genirq
> > > [ 42.155139] CPU: 1 PID: 2075 Comm: rmmod Not tainted
> > > 5.10.1-00026-g3a2e6dd7a05-dirty #192
> > > [ 42.163302] Hardware name: Enclustra XU5 SOM (DT)
> > > [ 42.167992] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
> > > [ 42.173996] pc : xilinx_dma_chan_remove+0x74/0xa0 [xilinx_dma]
> > > [ 42.179815] lr : xilinx_dma_chan_remove+0x70/0xa0 [xilinx_dma]
> > > [ 42.185636] sp : ffffffc01112bca0
> > > [ 42.188935] x29: ffffffc01112bca0 x28: ffffff80402ea640
> > > [ 42.194238] x27: 0000000000000000 x26: 0000000000000000
> > > [ 42.199542] x25: 0000000000000000 x24: 0000000000000000
> > > [ 42.204845] x23: 0000000000000000 x22: 0000000000000000
> > > [ 42.210149] x21: ffffffc0088a2028 x20: ffffff8040c08410
> > > [ 42.215452] x19: ffffff80423fa480 x18: ffffffffffffffff
> > > [ 42.220756] x17: 0000000000000000 x16: 0000000000000000
> > > [ 42.226059] x15: ffffffc010ce88c8 x14: 0000000000000040
> > > [ 42.231363] x13: ffffff0000000000 x12: ffffffffffffffff
> > > [ 42.236667] x11: 0000000000000028 x10: ffffffff7fffffff
> > > [ 42.241970] x9 : ffffffff00f0dfe0 x8 : 0000000000000000
> > > [ 42.247273] x7 : ffffffc010da4000 x6 : 0000000000000000
> > > [ 42.252577] x5 : 0000000000210d00 x4 : ffffffc010da4da0
> > > [ 42.257881] x3 : ffffff80423fa578 x2 : 0000000000000000
> > > [ 42.263184] x1 : dead000000000100 x0 : dead000000000122
> > > [ 42.268488] Call trace:
> > > [ 42.270923] xilinx_dma_chan_remove+0x74/0xa0 [xilinx_dma]
> > > [ 42.276399] xilinx_dma_remove+0x3c/0x70 [xilinx_dma]
> > > [ 42.281446] platform_drv_remove+0x24/0x38
> > > [ 42.285530] device_release_driver_internal+0xec/0x1a8
> > > [ 42.290659] driver_detach+0x64/0xd8
> > > [ 42.294226] bus_remove_driver+0x58/0xb8
> > > [ 42.298133] driver_unregister+0x30/0x60
> > > [ 42.302048] platform_driver_unregister+0x14/0x20
> > > [ 42.306744] xilinx_vdma_driver_exit+0x18/0x978 [xilinx_dma]
> > > [ 42.312396] __arm64_sys_delete_module+0x1e4/0x270
> > > [ 42.317178] el0_svc_common.constprop.4+0x68/0x170
> > > [ 42.321959] do_el0_svc+0x70/0x90
> > > [ 42.325267] el0_svc+0x14/0x20
> > > [ 42.328313] el0_sync_handler+0x90/0xb8
> > > [ 42.332141] el0_sync+0x158/0x180
> > > [ 42.335442] Code: 95dfce29 9103c260 95de7ffb a9490261 (f9000420)
> > > [ 42.341525] ---[ end trace dbd90aeb5ca71943 ]---
> > >
> > > So if I use the 04c2bc2bede1 (commit before 14ccf0aab46e) version of
> > > xilinx_dma.c and never remove the module then it is working with the
> > > 5.10.1 kernel.
> >
> > Ok, we will analyze this issue and report back the findings.
>
> + Dave
>
> I was able to reproduce this crash on the unloading xilinx_dma module.
> This is introduced due to the e81274cd6b526 mainline commit added
> in the 5.6 kernel version. The crash is coming from -
>
> xilinx_dma_chan_remove+0x74/0xa0:
> __list_del at ./include/linux/list.h:112
> (inlined by) __list_del_entry at./include/linux/list.h:135
> (inlined by) list_del at ./include/linux/list.h:146
> (inlined by) xilinx_dma_chan_remove at drivers/dma/xilinx/xilinx_dma.c:2546
>
> Looking into e81274cd6b526 commit - It deletes channel device_node entry.
> Same channel device_node entry is also deleted in xilinx_dma_chan_remove
> as a result we see this crash.
>
> @@ -993,12 +1007,22 @@ static
> void __dma_async_device_channel_unregister(struct dma_device *device,
> "%s called while %d clients hold a reference\n",
> __func__, chan->client_count);
> mutex_lock(&dma_list_mutex);
> + list_del(&chan->device_node);
> + device->chancnt--;
OK, so following the above if I remove the list_del() from
xilinx_dma_chan_remove() like this:
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 22faea653ea8..ebe8ec6a040c 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -2542,8 +2542,6 @@ static void xilinx_dma_chan_remove(struct
xilinx_dma_chan *chan)
free_irq(chan->irq, chan);
tasklet_kill(&chan->tasklet);
-
- list_del(&chan->common.device_node);
}
static int axidma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
Then this fixes the oops on remove. As a side note it seems that if
the oops has already happened then the Software System Reset doesn't
work in our system.
-Paul
>
> I will let Dave comment on the background of this change. In
> dmaengine driver - we are adding channel device node entry
> so deleting it in the exit path looks fine to me. Also, I checked
> other dma drivers are also deleting channel device_node entry
> in .remove so it likely a common problem.
>
> >
> > >
> > > Hopefully, this will be clear to someone how these issues can be
> > > resolved. In general we've been very happy using the xilinx dma.
> > >
> > > I'm not subscribed to the linux-kernel ML so if you need any further
> > > info or testing just keep me in the to: list.
> > >
> > > thanks,
> > > Paul
More information about the linux-arm-kernel
mailing list