[PATCH 2/2] soc: sunxi: mbus: Remove DE2 display engine compatibles

[Paul Kocialkowski]

The DE2 display engine hardware takes physical addresses that do not
need PHYS_BASE subtracted. As a result, they should not be present
on the mbus driver match list. Remove them.

This was tested on the A83T, along with the patch allowing the DMA
range map to be non-NULL and restores a working display.

Fixes: b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
---
 drivers/soc/sunxi/sunxi_mbus.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/soc/sunxi/sunxi_mbus.c b/drivers/soc/sunxi/sunxi_mbus.c
index e9925c8487d7..d90e4a264b6f 100644
--- a/drivers/soc/sunxi/sunxi_mbus.c
+++ b/drivers/soc/sunxi/sunxi_mbus.c
@@ -23,12 +23,7 @@ static const char * const sunxi_mbus_devices[] = {
 	"allwinner,sun7i-a20-display-engine",
 	"allwinner,sun8i-a23-display-engine",
 	"allwinner,sun8i-a33-display-engine",
-	"allwinner,sun8i-a83t-display-engine",
-	"allwinner,sun8i-h3-display-engine",
-	"allwinner,sun8i-r40-display-engine",
-	"allwinner,sun8i-v3s-display-engine",
 	"allwinner,sun9i-a80-display-engine",
-	"allwinner,sun50i-a64-display-engine",
 
 	/*
 	 * And now we have the regular devices connected to the MBUS
-- 
2.30.0