[PATCH V6 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook

[Peng Fan]

> Subject: Re: [PATCH V6 07/10] remoteproc: imx_rproc: add i.MX specific
> parse fw hook
> 
> On Tue, Jan 12, 2021 at 05:39:16PM +0800, peng.fan at nxp.com wrote:
> > From: Peng Fan <peng.fan at nxp.com>
> >
> > The hook is used to parse memory-regions and load resource table from
> > the address the remote processor published.
> >
> > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > Reviewed-by: Richard Zhu <hongxing.zhu at nxp.com>
> > Reviewed-by: Mathieu Poirier <mathieu.poirier at linaro.org>
> > ---
> >  drivers/remoteproc/imx_rproc.c | 93
> > ++++++++++++++++++++++++++++++++++
> >  1 file changed, 93 insertions(+)
> >
> > diff --git a/drivers/remoteproc/imx_rproc.c
> > b/drivers/remoteproc/imx_rproc.c index 47fc1d06be6a..3c0075dc1787
> > 100644
> > --- a/drivers/remoteproc/imx_rproc.c
> > +++ b/drivers/remoteproc/imx_rproc.c
> > @@ -10,6 +10,7 @@
> >  #include <linux/mfd/syscon.h>
> >  #include <linux/module.h>
> >  #include <linux/of_address.h>
> > +#include <linux/of_reserved_mem.h>
> >  #include <linux/of_device.h>
> >  #include <linux/platform_device.h>
> >  #include <linux/regmap.h>
> > @@ -241,10 +242,102 @@ static void *imx_rproc_da_to_va(struct rproc
> *rproc, u64 da, size_t len, bool *i
> >  	return va;
> >  }
> >
> > +static int imx_rproc_mem_alloc(struct rproc *rproc,
> > +			       struct rproc_mem_entry *mem) {
> > +	struct device *dev = rproc->dev.parent;
> > +	void *va;
> > +
> > +	dev_dbg(dev, "map memory: %p+%zx\n", &mem->dma, mem->len);
> > +	va = ioremap_wc(mem->dma, mem->len);
> > +	if (IS_ERR_OR_NULL(va)) {
> > +		dev_err(dev, "Unable to map memory region: %p+%zx\n",
> > +			&mem->dma, mem->len);
> > +		return -ENOMEM;
> > +	}
> > +
> > +	/* Update memory entry va */
> > +	mem->va = va;
> > +
> > +	return 0;
> > +}
> > +
> > +static int imx_rproc_mem_release(struct rproc *rproc,
> > +				 struct rproc_mem_entry *mem)
> > +{
> > +	dev_dbg(rproc->dev.parent, "unmap memory: %pa\n", &mem->dma);
> > +	iounmap(mem->va);
> > +
> > +	return 0;
> > +}
> > +
> > +static int imx_rproc_parse_memory_regions(struct rproc *rproc) {
> > +	struct imx_rproc *priv = rproc->priv;
> > +	struct device_node *np = priv->dev->of_node;
> > +	struct of_phandle_iterator it;
> > +	struct rproc_mem_entry *mem;
> > +	struct reserved_mem *rmem;
> > +	u32 da;
> > +
> > +	/* Register associated reserved memory regions */
> > +	of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
> > +	while (of_phandle_iterator_next(&it) == 0) {
> > +		/*
> > +		 * Ignore the first memory region which will be used vdev buffer.
> > +		 * No need to do extra handlings, rproc_add_virtio_dev will handle
> it.
> > +		 */
> > +		if (!strcmp(it.node->name, "vdevbuffer"))
> 
> Because you are doing a V8, please use "vdev0buffer" and make the change in
> the .yaml file.

V7, I have not post out V7 yet.

Seems I forgot the change this to vdev0buffer, I recalled you have same comments
before.

Thanks,
Peng.

> 
> > +			continue;
> > +
> > +		rmem = of_reserved_mem_lookup(it.node);
> > +		if (!rmem) {
> > +			dev_err(priv->dev, "unable to acquire memory-region\n");
> > +			return -EINVAL;
> > +		}
> > +
> > +		/* No need to translate pa to da, i.MX use same map */
> > +		da = rmem->base;
> > +
> > +		/* Register memory region */
> > +		mem = rproc_mem_entry_init(priv->dev, NULL,
> (dma_addr_t)rmem->base, rmem->size, da,
> > +					   imx_rproc_mem_alloc, imx_rproc_mem_release,
> > +					   it.node->name);
> > +
> > +		if (mem)
> > +			rproc_coredump_add_segment(rproc, da, rmem->size);
> > +		else
> > +			return -ENOMEM;
> > +
> > +		rproc_add_carveout(rproc, mem);
> > +	}
> > +
> > +	return  0;
> > +}
> > +
> > +static int imx_rproc_parse_fw(struct rproc *rproc, const struct
> > +firmware *fw) {
> > +	int ret = imx_rproc_parse_memory_regions(rproc);
> > +
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = rproc_elf_load_rsc_table(rproc, fw);
> > +	if (ret)
> > +		dev_info(&rproc->dev, "No resource table in elf\n");
> > +
> > +	return 0;
> > +}
> > +
> >  static const struct rproc_ops imx_rproc_ops = {
> >  	.start		= imx_rproc_start,
> >  	.stop		= imx_rproc_stop,
> >  	.da_to_va       = imx_rproc_da_to_va,
> > +	.load		= rproc_elf_load_segments,
> > +	.parse_fw	= imx_rproc_parse_fw,
> > +	.find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
> > +	.sanity_check	= rproc_elf_sanity_check,
> > +	.get_boot_addr	= rproc_elf_get_boot_addr,
> >  };
> >
> >  static int imx_rproc_addr_init(struct imx_rproc *priv,
> > --
> > 2.28.0
> >