[PATCH 2/2] fpga: Add support for Xilinx DFX AXI Shutdown manager
Nava kishore Manne
nava.manne at xilinx.com
Thu Jan 14 20:34:31 EST 2021
This patch adds support for Xilinx Dynamic Function eXchange(DFX) AXI
shutdown manager IP. It can be used to safely handling the AXI traffic
on a Reconfigurable Partition when it is undergoing dynamic reconfiguration
and there by preventing system deadlock that may occur if AXI transactions
are interrupted during reconfiguration.
PR-Decoupler and AXI shutdown manager are completely different IPs.
But both the IP registers are compatible and also both belong to the
same sub-system (fpga-bridge).So using same driver for both IP's.
Signed-off-by: Nava kishore Manne <nava.manne at xilinx.com>
---
drivers/fpga/xilinx-pr-decoupler.c | 35 ++++++++++++++++++++++++++----
1 file changed, 31 insertions(+), 4 deletions(-)
diff --git a/drivers/fpga/xilinx-pr-decoupler.c b/drivers/fpga/xilinx-pr-decoupler.c
index 7d69af230567..c95f3d065ccb 100644
--- a/drivers/fpga/xilinx-pr-decoupler.c
+++ b/drivers/fpga/xilinx-pr-decoupler.c
@@ -19,10 +19,15 @@
#define CTRL_OFFSET 0
struct xlnx_pr_decoupler_data {
+ const struct xlnx_config_data *ipconfig;
void __iomem *io_base;
struct clk *clk;
};
+struct xlnx_config_data {
+ char *name;
+};
+
static inline void xlnx_pr_decoupler_write(struct xlnx_pr_decoupler_data *d,
u32 offset, u32 val)
{
@@ -76,15 +81,28 @@ static const struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
.enable_show = xlnx_pr_decoupler_enable_show,
};
+static const struct xlnx_config_data decoupler_config = {
+ .name = "Xilinx PR Decoupler",
+};
+
+static const struct xlnx_config_data shutdown_config = {
+ .name = "Xilinx DFX AXI shutdown mgr",
+};
+
static const struct of_device_id xlnx_pr_decoupler_of_match[] = {
- { .compatible = "xlnx,pr-decoupler-1.00", },
- { .compatible = "xlnx,pr-decoupler", },
+ { .compatible = "xlnx,pr-decoupler-1.00", .data = &decoupler_config },
+ { .compatible = "xlnx,pr-decoupler", .data = &decoupler_config },
+ { .compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
+ .data = &shutdown_config },
+ { .compatible = "xlnx,dfx-axi-shutdown-manager",
+ .data = &shutdown_config },
{},
};
MODULE_DEVICE_TABLE(of, xlnx_pr_decoupler_of_match);
static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct xlnx_pr_decoupler_data *priv;
struct fpga_bridge *br;
int err;
@@ -94,6 +112,14 @@ static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
+ if (np) {
+ const struct of_device_id *match;
+
+ match = of_match_node(xlnx_pr_decoupler_of_match, np);
+ if (match && match->data)
+ priv->ipconfig = match->data;
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->io_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->io_base))
@@ -114,7 +140,7 @@ static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
clk_disable(priv->clk);
- br = devm_fpga_bridge_create(&pdev->dev, "Xilinx PR Decoupler",
+ br = devm_fpga_bridge_create(&pdev->dev, priv->ipconfig->name,
&xlnx_pr_decoupler_br_ops, priv);
if (!br) {
err = -ENOMEM;
@@ -125,7 +151,8 @@ static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
err = fpga_bridge_register(br);
if (err) {
- dev_err(&pdev->dev, "unable to register Xilinx PR Decoupler");
+ dev_err(&pdev->dev, "unable to register %s",
+ priv->ipconfig->name);
goto err_clk;
}
--
2.18.0
More information about the linux-arm-kernel
mailing list