[PATCH 1/4] ARM: dts: stm32: add usbphyc vdda1v1 and vdda1v8 supplies on stm32mp151

[Amelie Delaunay]

vdda1v1 and vdda1v8 supplies are required by USB PLL. Add them in usbphyc
node.

Signed-off-by: Amelie Delaunay <amelie.delaunay at foss.st.com>
---
 arch/arm/boot/dts/stm32mp151.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 3c75abacb374..07cb927ba06d 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1486,6 +1486,8 @@
 			reg = <0x5a006000 0x1000>;
 			clocks = <&rcc USBPHY_K>;
 			resets = <&rcc USBPHY_R>;
+			vdda1v1-supply = <&reg11>;
+			vdda1v8-supply = <&reg18>;
 			status = "disabled";
 
 			usbphyc_port0: usb-phy at 0 {
-- 
2.17.1