[PATCH 2/4] ARM: dts: stm32: remove usbphyc ports vdda1v1-vdda1v8 on stm32mp157c-ed1

[Amelie Delaunay]

vdda1v1 and vdda1v8 supplies are required by USB PLL, not by the PHYs.
Remove them from usbphyc child phy nodes now that they are managed in
usbphyc parent node at SoC level.

Signed-off-by: Amelie Delaunay <amelie.delaunay at foss.st.com>
---
 arch/arm/boot/dts/stm32mp157c-ed1.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 81a7d5849db4..95b08876b2b3 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -393,12 +393,8 @@
 
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
-	vdda1v1-supply = <&reg11>;
-	vdda1v8-supply = <&reg18>;
 };
 
 &usbphyc_port1 {
 	phy-supply = <&vdd_usb>;
-	vdda1v1-supply = <&reg11>;
-	vdda1v8-supply = <&reg18>;
 };
-- 
2.17.1