[PATCH v2 0/7] PinePhone BT audio bringup

[Samuel Holland]

This series makes use of the additional DAIs recently added to the
sun8i-codec driver to add hardware routing for BT SCO (headset) audio
on the PinePhone.

The BT audio connection is represented by the "dummy" bt-sco codec. The
connection to the Quectel EG-25G modem via AIF2 works as well, but I do
not include it here because there is no appropriate codec driver in
tree. We have been using an out-of-tree "dummy" codec driver for the
modem similar to bt-sco, and I'm not sure if such a driver would be
desired upstream.

Changes from v1:
  - Fixed DT binding example to follow new binding

Arnaud Ferraris (1):
  arm64: dts: allwinner: pinephone: Set audio card name

Samuel Holland (6):
  ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells
  ARM: dts: sun8i-a33: Allow using multiple codec DAIs
  arm64: dts: allwinner: a64: Allow using multiple codec DAIs
  arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3
  arm64: dts: allwinner: a64: Allow multiple DAI links
  arm64: dts: allwinner: pinephone: Add support for Bluetooth audio

 .../sound/allwinner,sun8i-a33-codec.yaml      |  4 +-
 arch/arm/boot/dts/sun8i-a33.dtsi              |  4 +-
 .../dts/allwinner/sun50i-a64-pinephone.dtsi   | 25 +++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 37 ++++++++++++++-----
 4 files changed, 56 insertions(+), 14 deletions(-)

-- 
2.26.2