[PATCH 3/4] ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux

[Andreas Kemnade]

Configuration was correct enough to work with the pre-configuration done by
uboot. While at it, also document the location.

Signed-off-by: Andreas Kemnade <andreas at kemnade.info>
---
 arch/arm/boot/dts/imx6sl-tolino-shine3.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
index 27143ea0f0f1..62d2ebda04ff 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
@@ -156,7 +156,7 @@
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
-			MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
 		>;
 	};
 
-- 
2.20.1