[PATCH v5 15/36] firmware: arm_scmi: port GenPD driver to the new scmi_power_proto_ops interface
Cristian Marussi
cristian.marussi at arm.com
Tue Jan 12 14:19:57 EST 2021
Port driver to the new SCMI Power interface based on protocol handles
and common devm_get_ops().
Signed-off-by: Cristian Marussi <cristian.marussi at arm.com>
---
v4 --> v5
- using renamed devm_get/put_protocol
---
drivers/firmware/arm_scmi/scmi_pm_domain.c | 26 +++++++++++++---------
1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/firmware/arm_scmi/scmi_pm_domain.c b/drivers/firmware/arm_scmi/scmi_pm_domain.c
index 9e44479f0284..b85141e7e6bc 100644
--- a/drivers/firmware/arm_scmi/scmi_pm_domain.c
+++ b/drivers/firmware/arm_scmi/scmi_pm_domain.c
@@ -2,7 +2,7 @@
/*
* SCMI Generic power domain support.
*
- * Copyright (C) 2018 ARM Ltd.
+ * Copyright (C) 2018-2020 ARM Ltd.
*/
#include <linux/err.h>
@@ -11,9 +11,11 @@
#include <linux/pm_domain.h>
#include <linux/scmi_protocol.h>
+static const struct scmi_power_proto_ops *power_ops;
+
struct scmi_pm_domain {
struct generic_pm_domain genpd;
- const struct scmi_handle *handle;
+ const struct scmi_protocol_handle *ph;
const char *name;
u32 domain;
};
@@ -25,16 +27,15 @@ static int scmi_pd_power(struct generic_pm_domain *domain, bool power_on)
int ret;
u32 state, ret_state;
struct scmi_pm_domain *pd = to_scmi_pd(domain);
- const struct scmi_power_ops *ops = pd->handle->power_ops;
if (power_on)
state = SCMI_POWER_STATE_GENERIC_ON;
else
state = SCMI_POWER_STATE_GENERIC_OFF;
- ret = ops->state_set(pd->handle, pd->domain, state);
+ ret = power_ops->state_set(pd->ph, pd->domain, state);
if (!ret)
- ret = ops->state_get(pd->handle, pd->domain, &ret_state);
+ ret = power_ops->state_get(pd->ph, pd->domain, &ret_state);
if (!ret && state != ret_state)
return -EIO;
@@ -60,11 +61,16 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
struct genpd_onecell_data *scmi_pd_data;
struct generic_pm_domain **domains;
const struct scmi_handle *handle = sdev->handle;
+ struct scmi_protocol_handle *ph;
- if (!handle || !handle->power_ops)
+ if (!handle)
return -ENODEV;
- num_domains = handle->power_ops->num_domains_get(handle);
+ power_ops = handle->devm_get_protocol(sdev, SCMI_PROTOCOL_POWER, &ph);
+ if (IS_ERR(power_ops))
+ return PTR_ERR(power_ops);
+
+ num_domains = power_ops->num_domains_get(ph);
if (num_domains < 0) {
dev_err(dev, "number of domains not found\n");
return num_domains;
@@ -85,14 +91,14 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
for (i = 0; i < num_domains; i++, scmi_pd++) {
u32 state;
- if (handle->power_ops->state_get(handle, i, &state)) {
+ if (power_ops->state_get(ph, i, &state)) {
dev_warn(dev, "failed to get state for domain %d\n", i);
continue;
}
scmi_pd->domain = i;
- scmi_pd->handle = handle;
- scmi_pd->name = handle->power_ops->name_get(handle, i);
+ scmi_pd->ph = ph;
+ scmi_pd->name = power_ops->name_get(ph, i);
scmi_pd->genpd.name = scmi_pd->name;
scmi_pd->genpd.power_off = scmi_pd_power_off;
scmi_pd->genpd.power_on = scmi_pd_power_on;
--
2.17.1
More information about the linux-arm-kernel
mailing list